2007 Chevrolet Avalanche Tonneau Cover

Hey Lester, thanks for the pics and the measurements. The only roll up cover that's possibly going to work with your set up is the TruXedo TruXport Soft item #TX246901. The reason this will work on your Ram 3500 is that the rails mount on top of…

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Raymond, with the BAKFlip F1 part #BAK37FR folded up but not up against the back of the rear glass of the truck you will be able to tow your fifth wheel trailer. There would be enough access to the truck bed and hitch since you have a long bed…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

Hi JD; if I had to choose between the Leer Hard Tonneau Cover #LE67FR and BAKFlip MX4 #BAK448133 I would go with the MX4. As far as security goes both are locking covers so it will be about the same between the two. The MX4 has seals and drain tubes…

Hey there Harry, that's a good question, as the difference is the strength of the aluminum vs. polycarbonate Retrax tonneau covers that fit your 2024 Ram 3500 with a 6-1/2 foot bed. The aluminum RetraxPRO MX Hard Tonneau Cover #RT80232 has the…

Hey Nic. The Access Toolbox Edition Soft, Roll-Up Tonneau Cover item #A64239 fits the 2025 Ram 1500's with the 5-1/2' bed and no RamBoxes. It's designed to work with toolboxes 19" - 21" wide so if you install this on a…

We do have tonneau covers that will be better when hauling a 5th wheel. Folding covers are not the best option because when folded up it sits above the bed rails quite a bit. This could result in damage to your trailer, the tonneau and your 2019 Ford…

Hello Derick, thanks for reaching out. The only way to know if the Curt Helux Shock-Absorbing 5th Wheel Pin Box #C73RJ will work for you is to determine what pin box you have currently. The best way to do this is to find the sticker on the pin box…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…