2017 GMC Canyon Vehicle Tow Bar Wiring

Features:

This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. Includes 7-way to 6-way coiled adapter cord and 6-way socket.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. Includes installation hardware.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way adapter cable and 6-way car-side socket.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

This LED light bar is completely wireless, receiving brake and turn signals from a transmitter plugged into your vehicle's 7-way round. It runs on a rechargeable battery. Weatherproof and super durable, it mounts securely with heavy-duty magnets.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

This LED light bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

These lights get turn and brake signals on your towed car without splicing into its wiring, eliminating the risk of damage from electrical feedback. They mount inside your vehicle's tail light housing, with the wiring out of sight.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

Stick these heavy-duty magnetic lights on the back of your car and they'll stay there. Nice and secure, these are also the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

These lights get turn and brake signals on your towed car without splicing into its wiring, eliminating the risk of damage from electrical feedback. They mount inside your vehicle's tail light housing, with the wiring out of sight.

Features:

Heavy-duty kit gets you tow lights that will last for the long haul, with rubber-coated housing, powerful magnetic bases, and a robust wiring harness. Displays brake and turn signals on your trailer or towed car. Comes with a handy carrying case.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

This complete kit includes everything you need to carry your RV's brake and turn signals to your towed car's tail lights. Diodes prevent electrical feedback. The hybrid coiled/straight adapter cord is ideal for tow bars with channel guides.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

Get a head-start on wiring your towed car before you even get the installation started. This kit comes with butt connectors pre-installed and ready to splice into your wiring. Integrated block diodes protect your vehicle from electrical feedback.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

Stick these bright, efficient LED lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

Stick these bright, efficient LED lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

These lights get turn and brake signals on your towed car without splicing into its wiring. They mount inside your vehicle's tail light housing, with the wiring out of sight. The LEDs are efficient, long-lasting, and bright. 450 Lumens per bulb.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

This LED light bar is completely wireless, receiving brake and turn signals from a transmitter plugged into your vehicle's 4-pin round. It runs on a rechargeable battery. Weatherproof and super durable, it mounts securely with heavy-duty magnets.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual.

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

Stick these magnetic lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 4-wire Flexo-Coil electrical cord.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

This complete kit includes everything you need to display brake and turn signals on your towed car. Bright LEDs mount inside your vehicle's tail light housings, with the wiring out of sight. Includes 7-to-6-wire adapter cable and 6-wire socket.

Installation Notes:

Battery must be disconnected for towing. One disconnect is needed for each starter battery. Please check owner's manual

Quick Battery Disconnect in Accessory Parts above is for Gas models. Diesel engines need part RM93MR. One disconnect is needed for each starter battery.

Automatic Battery Disconnect RM-765 and RM-766 cannot be used on diesel vehicles or vehicles with dual batteries

Features:

These bright little lights get turn and brake signals on your towed car without splicing into its wiring. They install right into the tail light housing, with the wiring out of sight. These ones are so small they'll be easy to find space for.