Prodigy P3 Brake Controller Installation in 2016 GMC Canyon

Question

Question:

Hello, Do you have a wiring harness for the Tekonsha 90195 P3 Electronic Brake Control that fits 2016 GMC Canyon? thanks!

asked by: George

1

Helpful Expert Reply:

GMC chose not to include an under-dash port on this truck. So there is no Tekonsha plug-and-play brake controller wiring adapter for installing their P3 # 90195 in your 2016 GMC Canyon. Your installation will be hardwired, using the pigtail supplied with the P3 and the existing wiring present under the dash. The linked video illustrates the process; only 4 wires require connection to complete your install.

expert reply by: Adam R

1

Answer 1

For installing a brake controller in your 2017 GMC Canyon there is no plug present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash. It's up…

view full answer...

Answer 2

Yes, the Primus IQ Brake Controller part #TK90160 will install the exact same as the following instructions: According to my research, the 2016 Colorado/Canyon with the factory 7-way won't have a plug under the dash for installing a brake…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Prodigy P3 Brake Controller Installation in 2016 GMC Canyon

Featured Help Information

Miscellaneous Media

Continue Researching