Expert Review Video:
Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Designed to upgrade your rear suspension, LoadLifter 5000 air springs provide high-quality, full-time load support. They level your vehicle, improving braking and ride comfort and reducing the strain on your factory suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level, drive steady, and stay in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located below the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
When the load gets heavy, your truck shouldn't feel like it's fighting you. These air bags help you stay level, drive steady, and stay in control so you can tow with confidence and handle heavy loads without second-guessing your suspension.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Level your vehicle when you're hauling a heavy load with these Ride Control air springs. The adjustable springs improve overall stability and ride quality, eliminate rear sag, and reduce strain on your factory suspension.
Installation Notes:
Drilling through vehicle frame required for installation.
Does not fit vehicles with rear sway bar
Tech Tip:
Product intended for vehicles in which the axle is located above the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located above the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
Replace your factory bump stops and experience improved stability, reduced sag, and better control while towing or hauling. Durable rubber bump stops absorb road shock, minimize bounce, and protect your suspension for a smoother ride on any terrain.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located above the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
2,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product intended for vehicles in which the axle is located above the leaf spring pack.
More Information >Vehicle Suspension Specs:
Features:
14,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
Product does not fit trucks with Toyota Racing Development (TRD) Package
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with 3 Leaf Springs in the rear suspension
More Information >Vehicle Suspension Specs:
Features:
3,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with 3 Leaf Springs in the rear suspension
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with 4 Leaf Springs in the rear suspension
Tech Tip:
For vehicles that have been lifted, spacer kit T93AV is available to allow this product to be installed on your truck; sold separately.
More Information >Vehicle Suspension Specs:
Features:
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Installation Notes:
No drilling through vehicle frame required for installation.
For vehicles with 4 Leaf Springs in the rear suspension
Tech Tip:
For vehicles that have been lifted, spacer kit T93AV is available to allow this product to be installed on your truck; sold separately.
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
7,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
For vehicles with 4 Leaf Springs in the rear suspension
Tech Tip:
Spacer Kit T68MR is needed if your truck has been lifted and there is 6 - 7-3/4 inches between the frame and leaf springs when the truck is empty.
More Information >Vehicle Suspension Specs:
Features:
7,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
For vehicles with 4 Leaf Springs in the rear suspension
Tech Tip:
Spacer Kit T68MR is needed if your truck has been lifted and there is 6 - 7-3/4 inches between the frame and leaf springs when the truck is empty.
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Features:
Get improved handling with minimal sway and body roll for your vehicle. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride. Specially treated drill bits included.
Installation Notes:
Drilling into the leaf springs is required, and specially treated drill bits are included, along with detailed drilling instructions
Product designed for vehicles with factory leaf springs and a lower overload spring
More Information >Vehicle Suspension Specs:
Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
Product is designed for vehicles that have been lifted 2" to 6"
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
Product is designed for vehicles that have been lifted 2" to 6"
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
Product is designed for vehicles that have been lifted 2" to 6"
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
Product is designed for vehicles that have been lifted 2" to 6"
More Information >Vehicle Suspension Specs:
Features:
1,400-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
For vehicles with 3 Leaf Springs in the rear suspension
More Information >Vehicle Suspension Specs:
Features:
5,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.
Installation Notes:
No drilling through vehicle frame required for installation.
This is a Severe Service kit and should be used on vehicles with a slide-in camper or RV conversion, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.
For vehicles with 3 Leaf Springs in the rear suspension
More Information >Vehicle Suspension Specs:
Features:
1,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Installation Notes:
No drilling through vehicle frame required for installation.
SumoSprings jounce will replace the factory bumpstop for this application
More Information >Vehicle Suspension Specs:
Installation Notes:
No drilling through vehicle frame required for installation.
Tech Tip:
Product includes U-Bolt Flip Kit to allow for more ground clearance.
More Information >Vehicle Suspension Specs:
Features:
This isn't just air springs. It's a full onboard air system built to work. With a compressor and tank included, your vehicle stays level while towing, smooths out rough roads, and airs up tires or gear at the campsite, jobsite, or trailhead.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Squat and sag shouldn't come standard with a loaded truck. This kit gives you the control and confidence to haul heavy and stay level, with air bags, compressor, and in-cab controller that work together to keep your ride steady mile after mile.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
This isn't just air springs. It's a full onboard air system built to work. With a compressor and tank included, your vehicle stays level while towing, smooths out rough roads, and airs up tires or gear at the campsite, jobsite, or trailhead.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
This isn't just air springs. It's a full onboard air system built to work. With a compressor and tank included, your vehicle stays level while towing, smooths out rough roads, and airs up tires or gear at the campsite, jobsite, or trailhead.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Squat and sag shouldn't come standard with a loaded truck. This kit gives you the control and confidence to haul heavy and stay level, with air bags, compressor, and in-cab controller that work together to keep your ride steady mile after mile.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
This isn't just air springs. It's a full onboard air system built to work. With a compressor and tank included, your vehicle stays level while towing, smooths out rough roads, and airs up tires or gear at the campsite, jobsite, or trailhead.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Loaded down with gear and feeling it in the ride? This MT64 kit brings back control and confidence with 2" of lift front and rear, using matched struts, shocks, coils, and leaf springs that smooth out the drive and keep your truck riding right.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 660 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Outfitted for the long haul? This MT64 kit adds 2" of lift front and rear and is tuned to support weight at both ends. Matched struts, shocks, coils, and leaf springs give your Tacoma better control, comfort, and confidence on or off the trail.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
Product supports 600 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Whether you are outfitting your vehicle for off-road adventures, or ensuring it performs well under moderate loads, leaf springs are a critical upgrade that deliver lasting value. An additional benefit of 2" of lift boosts ground clearance.
Installation Notes:
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
Need more control with front-end gear but keeping the bed light? This MT64 kit adds 2" of lift front and rear, with monotube struts, shocks, coils, and leaf springs tuned for a smoother, more planted ride—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Loaded down with gear and feeling it in the ride? This MT64 kit brings back control and confidence with 2" of lift front and rear, using matched struts, shocks, coils, and leaf springs that smooth out the drive and keep your truck riding right.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 660 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Built your Tacoma for long-distance travel with gear front and rear? This BP-51 kit adds 2" of lift and is tuned to carry your full-time setup with confidence. Coilovers, shocks, and rear leaf springs improve control, comfort, and capability.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 660 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Carrying drawers or gear in the back but keeping the front light? This MT64 kit adds 2" of lift front and rear and includes shocks, struts, and springs tuned for a smoother, more stable ride when your truck stays loaded out back.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 600 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
When you are navigating tough trails or loading up your rig, your front suspension does a lot of the work. A good set of coil springs keeps your steering precise, prevents sagging, and gives you the stability and confidence to tackle what lies ahead.
More Information >Vehicle Suspension Specs:
Features:
Running gear up front but keeping the bed light? This BP-51 kit adds 2" of lift front and rear and includes adjustable coilovers, shocks, and rear leaf springs tuned for better control, comfort, and stance—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Whether you are outfitting your vehicle for off-road adventures, or just prepping to haul some gear, upgrading your leaf springs will really help you out. An additional benefit of 2" of lift boosts ground clearance.
Installation Notes:
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling light loads. Adjustable springs increase stability. Easy bolt-on design.
Installation Notes:
No drilling through vehicle frame required for installation.
More Information >Vehicle Suspension Specs:
Features:
Built your Tacoma for long-distance travel with gear front and rear? This BP-51 kit adds 2" of lift and is tuned to carry your full-time setup with confidence. Coilovers, shocks, and rear leaf springs improve control, comfort, and capability.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
Product supports 660 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Riding stock but want a better stance and smoother drive? This MT64 kit adds 2" of lift front and rear and includes aluminum-bodied struts & shocks, coils, and leaf springs tuned to improve ride, control, and comfort without guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Has your Tacoma lost ride height because you installed a bumper or winch? This kit restores 2" of lift, smooths out the ride, and brings back control—no cutting, no guesswork, just a suspension that's built for the way you drive.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Need more control with front-end gear but keeping the bed light? This MT64 kit adds 2" of lift front and rear, with monotube struts, shocks, coils, and leaf springs tuned for a smoother, more planted ride—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Running gear up front but keeping the bed light? This BP-51 kit adds 2" of lift front and rear and includes adjustable coilovers, shocks, and rear leaf springs tuned for better control, comfort, and stance—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Carrying weight up front but keeping the rear light? This BP-51 kit adds 2" of lift up front and improves ride comfort and control with adjustable coilovers and shocks that adapt to how and where you drive.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Want better ride quality and a more confident stance? This MT64 kit gives your Tacoma 2" of front lift and upgraded struts and shocks for smoother handling and improved control—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Has your Tacoma lost ride height or control after adding a bumper or winch? This kit restores 2" of lift and adds MT64 struts and shocks for better comfort, control, and durability—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Has your Tacoma lost ride height or control after adding a bumper or winch? This kit restores 2" of lift and adds MT64 struts and shocks for better comfort, control, and durability—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Need more control with front-end gear but keeping the bed light? This MT64 kit adds 2" of lift front and rear, with monotube struts, shocks, coils, and leaf springs tuned for a smoother, more planted ride—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Has your Tacoma lost ride height because you installed a bumper or winch? This kit restores 2" of lift, smooths out the ride, and brings back control—no cutting, no guesswork, just a suspension that's built for the way you drive.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Want better ride quality and a more confident stance? This MT64 kit gives your Tacoma 2" of front lift and upgraded struts and shocks for smoother handling and improved control—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Riding stock but want a better stance and smoother drive? This MT64 kit adds 2" of lift front and rear and includes aluminum-bodied struts & shocks, coils, and leaf springs tuned to improve ride, control, and comfort without guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
More Information >Vehicle Suspension Specs:
Features:
Need more control with front-end gear but keeping the bed light? This MT64 kit adds 2" of lift front and rear, with monotube struts, shocks, coils, and leaf springs tuned for a smoother, more planted ride—no cutting, no guesswork.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
More Information >Vehicle Suspension Specs:
Features:
Carrying weight up front but keeping the rear light? This BP-51 kit adds 2" of lift up front and improves ride comfort and control with adjustable coilovers and shocks that adapt to how and where you drive.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product supports up to 330 lbs of front gear.
More Information >Vehicle Suspension Specs:
Features:
Outfitted for the long haul? This MT64 kit adds 2" of lift front and rear and is tuned to support weight at both ends. Matched struts, shocks, coils, and leaf springs give your Tacoma better control, comfort, and confidence on or off the trail.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 220-330 lbs of added front gear.
Product supports 600 lbs of constant rear load.
More Information >Vehicle Suspension Specs:
Features:
Carrying drawers or gear in the back but keeping the front light? This MT64 kit adds 2" of lift front and rear and includes shocks, struts, and springs tuned for a smoother, more stable ride when your truck stays loaded out back.
Installation Notes:
Product will add approximately 2 inches of lift to front of your vehicle.
Product will add approximately 2 inches of lift to rear of your vehicle.
Product supports 600 lbs of constant rear load.
More Information >
Filters
