2019 Chevrolet Colorado Truck Bed Sliding Tray

Hello Tom, you are correct. Both the BedSlide #BE48ER and the #BE24ER are a fit for the 2024 GMC Sierra 1500. The only difference is the color of the tracks and the rails. The #BE48ER is all black while the #BE24ER has steel tracks and rails.

Hi Tom; the CargoGlide 1000 Sliding Tray for Trucks #CG1000-9548 weighs 175 lbs. This is confirmed to fit your 2024 GMC Sierra 1500 long bed.

The Truck Trolley Truck Bed Slide Out Tray for 8's Long Truck Beds item #TR99VR includes the Long Bed Extension Kit item #TR59VR. The Truck Trolley Truck Bed Slide Out Tray item #TR87VR is just the tray.

Hey Mike, thanks for reaching out. The 60" x 23" dimension listed for the #MR87ZV cargo tray is the overall dimensions of the tray. The inside dimensions of the tray are 58-1/4" long x 19-7/8" wide.

Hi Kev; the MORryde RV Cargo Sliding Tray with the 80% extension is only available at 72" long x 48 " wide #MR52FR. If you're alright with a 60% extension we have the MORryde RV Cargo Sliding Tray - 60" x 48" #MR85FR.

Hi Tanner; that is 100% correct. You can replace what you have now with the B&W Continuum Weight Distribution Head Assembly - 2-1/2" Shank #BW68FR if you do not want to use an adapter sleeve on your hitch. It would be great if you could just…

Hey John, you can install an AC unit like the Advent Air #ADV95SR on the roof of an enclosed car hauler like you have but you will need to do a little reinforcing of the roof and come up with some framing around the opening for the unit to install.…

Hello Nick, The Hitch ball for the Curt #C60642 will sit above or slightly forward of the rear truck axle. I attached 2 pictures of the underbody of the 2022 GMC Sierra, as you can see that the Curt #C60642 sits in the same spot as the B&W…

Hi Vern; they might but it depends on the configuration of your truck. For example, if your 2022 F-350 had an 8' bed with a factory/aftermarket hitch and your 2024 F-350 also has an 8' bed with a factory/aftermarket hitch they both use the…

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

For a 2022 Ram 1500 we carry a few Bedslide options but they all have a 4-1/2" height so depending on the fridge/cooler you plan on hauling around you may run into some clearance issues with your RetraxPro tonneau cover. The Bedslide options we…

Yes, it does Gary! The Blue Ox Base Plate Kit item #BX2914 has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…