2009 Ford Ranger Truck Bed Sliding Tray

Hey Mark, there isn't a way to use a Bedslide with a gooseneck but I was able to find that there is a way to use a CargoGlide with one if you use the part #CGGN-1 which is something that has to be special ordered from them. At this time we…

Hey Jim, congrats on the new truck. I would strongly advise staying away from the Severe Service Timbren Suspension Enhancement System item #TGMRTT35D. You're really going to feel those when you're driving around without your camper. Those…

Hey George, thanks for reaching out! You will need to add the 2" Spacer Kit #PB73VV Alpha HD Air Bag Suspension Kit #PB85RV if the distance from the bottom of your jounce to the top of the strike plate is more than 7-12", according to…

Hey Clarence! That would be great but none of the trailer camera systems are going to pair with vehicle monitors/screens. All of them will require a separate monitor. The Furrion is a really nice system so I do recommend it. Since the Vision S is…

Hey Mike, it is important that you use the included power cable with the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera #FR57AD like the instructions indicate. If this is like a hardwire install I would look for a cigarette lighter to 2-wire…

Hey Dave, thanks for reaching out! The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88375 is the kit I recommend using, as it will fit with an in-bed hitch and comes with internal jounce bumpers for an added…

Hey Dennis, thanks for reaching out! The Furrion Vision S+ system is what you're looking for as the rear camera will be plug and play like you're wanting. For a single rear camera, you need the Kit #FR57AD, but if you'd like to install a…

Hello Tim, The overall dimensions of the MORryde RV Cargo Slide Tray - 90" x 26" - 2 Way Slide - 60 Percent Extension - 800 lbs #MR87FR is 90" long x 26" wide x 6-5/8" tall, the actual tray dimensions are 88-1/4" long x…

The reverse light pin on a traditional 7-way trailer connector, like part #PK11893 or a factory connector if that's what you have on your 2018 Ram, is the center pin. Take a look at the picture I attached that shows all the pin functions. To add…

According to BedSlide the Factory Mount Installation Kit for BedSlide S and Classic #BE69WR will not work with any in bed towing packages such as 5th wheel & gooseneck towing packages. This installation kit you mentioned is actually designed to…

Hey Lance, That does sound excessive, but the B&W Continuum #BW28FR is a bit of a different animal when it comes to how it operates so I do recommend sticking to the rules laid out by B&W. It wouldn't be a bad idea to have a grease gun…

Hey Gene, thanks for reaching out! For your application I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL57575 because they offer a higher weight rating at 7,500 lbs so they will have to work less for the constant…