Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey John, welcome back! I do have a way better functional solution for you. It's the Brandmotion Tailgate Delete Backup Camera with Wiring Harness item #BM84SR. This camera attaches to your license plate bracket. The other end will connect to the…
view full answer...Hey Jeff, If the Gen Y Executive Coupler has the SnapLatch feature the Infinite Rule Lock #IR48FR will work for you. If you have an older model without that SnapLatch feature you will need the Gen Y lock GH-8111. Unfortunately it has been…
view full answer...The Voyager RV Side Camera #VCMS12RGPR is the correct replacement for your vcms36rgp that you have. This will replace the passenger side camera with no wiring adapters required. We also have the driver side camera #VCMS12LGPR if you want to replace…
view full answer...Hello Alberta, thanks for reaching out. I have heard of this happening before with the Voyager monitors where condensation gets inside and fills the camera with water. Sadly there is not a great way to clean this and the camera is most likely done. I…
view full answer...Hey Barry, thanks for reaching out, and thanks for providing that picture - it really helps. One of the Fastway universal coupler locks will work great for that. They work with 1-7/8", 2" and 2-5/16" balls, and they work with virtually…
view full answer...According to Shorlandr, your SLR22L trailer uses hubs with a L44649 inner and outer bearing. The #CE13511 hub you mentioned uses a different inner bearing, so it won't work for you. The good news is that the #CE13311 is the correct hub, assuming…
view full answer...If the trailer tongue in question is 3-1/2 inches round then you can use Bulldog coupler #BD028383. If you have a square or rectangular tongue then a 3-1/2 inch wide straight coupler is not available. You may be able to use a channel bracket like…
view full answer...It looks like you are needing the bra for a bearing protector. We do not carry any bras that say Shorelander on them, but Bearing Buddy makes some that would probably work for you. Part #BB17B are 2 inch diameter, and the #BB19B are 2-1/8 inch in…
view full answer...You can use sway control only with an adjustable ball mount in one of two ways. First, you could use sway control bracket #RP26003 which will fit a ball mount platform up to 2.610 inches wide. It also has a 1 inch diameter hitch ball hole. The other…
view full answer...All of that is not necessary. All you have to do is lock out the surge coupler so it cannot move in and out or disconnect the brake lines. By removing the old coupler you would have to remove the brake lines any way. A surge coupler can still be used…
view full answer...Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…
view full answer...Hey Doyle, we actually have a cover that was made specifically to fit the R-Pod 180 with the Classic Accessories PolyPRO 3 R-Pod Trailer Cover #CA80-197-171001-00. It was designed specifically for the R-Pod shape so it will fit really well. Check out…
view full answer...