The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.
Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" wheels. 5 bolt pattern backing plate. Made in the USA.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and dust shields to protect from debris. Fits 15" or larger wheels.
Free-backing, driver's-side and passenger's-side drum brakes won't engage when you reverse, even if your actuator is activated. Automotive-grade friction pads and e-coated backing plates are long-lasting. Fit 14" to 15" wheels.
Replace the brake shoes and lining on your 12" diameter x 2" thick manual-adjust trailer brake assembly. Fits brakes designed for 5,200-lb, 6,000-lb, and 7,000-lb axles. Includes hold-down clips.
Replace the brake shoes and lining on your 10" diameter x 2-1/4" thick manual-adjust, electric trailer brake assembly. Fits brakes designed for 3,500-lb axles. Includes hold-down clips.
Your trailer must have free backing brakes if you have never used the surge brake actuating coupler reverse lockout. If you did not have free backing brakes, your brakes would most likely brake even if they didn't lock up when you back up because…
There are a number of trailer brake shoes available for 10" hydraulic drum brakes, such as the 10" X 2-1/4" Hydraulic Brake Shoe/Lining #BP04-120 which will fit Atwood, Bendix, Dexter, and Dico 10" X 2-1/4" hydraulic brakes,…
To replace the springs on your 10" hydraulic drum brakes you'll need the following: - Shoe Return Spring Kit #BP07-105 - Replacement Adjuster Spring #046-083-01 - Shoe Hold Down Spring Kit #BP06-120
So the Atwood 83000, 83005, 83010 brake actuators are obsolete, and Atwood is no longer in business so there isn't a replacement master cylinder. You'll need to replace the whole actuator, and for one like the Atwood with the same 8,000 lb…
I contacted Dexter with the serial number from your Dexter Torsion axle on the 2019 Lance 1985. The outer bearing is part #L44649 and the inner bearing is part #L68149 with a Dexter seal 010-019-00 which measures 1.719" inner diameter. You can…
Certainly; the correct replacement brake shoes for the Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" #23-458 and #23-459 are the following: - Replacement Shoe and Lining for Nev-R-Adjust 12" x 2" Electric - Left Hand…
We sure do! The Demco Surge Brake Actuator #DM8609101 you were looking at has mounting holes that are 3" apart from the front hole to the second hole, 9-1/2" apart from the second hole to the last hole, and 12-1/2" apart between the…
The AxleTek B12E-21 and B12E-22 are the same as Electric Trailer Brake Kit #AKEBRK-6, which are manually-adjusting electric trailer brakes for 5,200 lb to 7,000 lb axles. You can purchase replacement shoes for these brake assemblies with Replacement…
Not all bearings are created equal, but you would be hard-pressed to find one that is vastly superior than another. Whether it is TruRyde, Timken, or some other brand, if the bearings are properly maintained, used in the correct hub, and within the…
Hey Frank, thanks for reaching out! According to my contact at Dexter Axle you need the following: - Right Hand Dexter Nev-R-Adjust Electric Trailer Brake Assembly #23-459 - Bearing, 42MM Nev-R-Lube 42MM x 76MM x 39MM #31-73-3 If you're also…
Hey Jay, thanks for reaching out! Yes, you can technically go with the 7K Brake Kit #23-464-465, but since your axles are rated for 5.2K, I recommend picking up the 6K Brake Kit #23-458-459 instead. This kit has magnets that aren't quite as…
Brake shoes fit Dexter Nev-R-Adjust electric brakes that are 10" x 2-1/4" and have an axle rating of 3,500 lbs. Includes lining for right-hand brake assembly only.
Brake shoes fit Dexter Nev-R-Adjust electric brakes that are 10" x 2-1/4" and have an axle rating of 3,500 lbs. Includes lining for left-hand brake assembly only.
Filters
