Result: brake shoe

Thanks for reaching out, David. For your 2021 Toyota Highlander Platinum I recommend the etrailer Class 3 Hitch #e75ZR. This hitch will fit all models of the 2021 Highlander including the Platinum model. We also have the Curt #C45CR hitch for the…

The etrailer Trailer Hitch Receiver part #e75ZR which is a fit for a 2023 Toyota Highlander will not work with full size spare tires but I do have an option for you that will in the EcoHitch Hidden Trailer Hitch Receiver part #EH35VR which is also a…

Thanks for the pictures of your actuator Corey, I can see you have an Atwood coupler which like you mentioned is no longer available so it would be time to replace it with something current. Since you would prefer a manual lockout actuator (don't…

According to my research, AL-KO 8490 references an AL-KO hub for 3,500 lb axles with a 10 x 2-1/4" drum and a 5 on 4-1/2" bolt pattern. For a drum assembly that will work with these hubs I recommend taking a look at the Electric Trailer…

You already did all of the work here by finding the bearings. Since you have a #25580 inner and #15123 outer bearing the Easy Grease Trailer Hub and Drum Assembly for 6K Axles #AKHD-655-6-G-EZ-K will work as a replacement. The only other thing to…

There are a few things that could be causing this issue on your brakes. First thing I would check for would be a clog in the brake lines. To do this you will want to bleed the brakes. Second thing it could be is a bad wheel cylinder which would…

The biggest difference between the servo styles that you'll notice is between free backing plates and the others. The free-backing plates will allow your trailer to back up without having the brakes lock up. With surge brakes typically when you…

Sounds like you are looking for the Flair-It PEX 90-Degree Elbow Fitting #FL36VR which is a 90 degree freshwater elbow fitting.

The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has #L44649 inner and outer…

The etrailer.com Self-Adjusting Brakes #AKEBRK-35-SA will replace both brakes on an axle, but do not come with the hubs. That being said, if the hubs are in good condition, they will not need to be replaced. When you remove the hub, you will need to…

Brake Assemblies like the Hydraulic Brake Kit - Uni-Servo - Free Backing - 12" - Left/Right Hand Assemblies - 5.5K to 7K item #AKFBBRK-7 will have the description in the title that the brakes are free backing. We also offer the same size free…

The Landing Gear Set part #RVLG-8HDL is a great replacement option or upgrade for most trailers. That said, in order to confirm fit, you'll need to measure the distance between the weld stops on the existing legs. If they measure 15-1/2"…