Need a complete lighting setup for your trailer? This kit includes everything required for trailers under 80" wide, making it easy to get fully equipped and compliant. ... Highlights Complete TrailerLighting Setup: Kit includes tail lights, side marker lights, harness, and license bracket. DOT Lighting Coverage: Includes required lighting and reflectors for DOT compliance on trailers.
This incandescent trailerlightkit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.Features: Incandescent trailerlightkit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware Sonically sealed, waterproof tail lights and clearance lights are submersible 2 Low-profile combination tail lights (ST16RB and ST17RB) Provide stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex functions Driver's-side light includes license illuminator 2 Amber clearance lights (MC91AB) Self-grounding chrome bases Gaskets for weathertight seal 2 Amber reflectors (RE11AB) meet FMVSS "A" for reflex when properly applied Durable polycarbonate housing on all lights Compatible with 12V DC systems Simple installation with included mounting bracket (LP5SB) and stainless steel mounting hardware Tail lights stud mount to trailer Clearance lights surface mount to trailer Reflectors screw-mount to trailer or attach with adhesive backing 25' Wiring harness with 4-pole connector DOT approved PC rated Specs: Application: trailers over 80" wide Tail light dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Distance between mounting holes (center on center): 2" Clearance light dimensions: 2-7/8" long x 1-1/2" wide x 1" thick Reflector dimensions: 4-7/16" long x 1-15/16" wide Distance between mounting holes (center on center): 3-15/16" Power draw at 12V: Tail lights: Stop/turn: 2.3 amps Tail: 0.9 amps Clearance lights: 0.2 amps Limited 3-year warranty Note: Over 80" Federal Regulations require additional clearance lights (like MC94RB, sold separately) Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Powered by Your Battery This converter won't overload or cause damage to your system because it pulls power straight from your vehicle's battery. So you can be sure that your trailerlights will activate no matter what type of bulbs your vehicle has - or your trailer, for that matter. Converter Wiring Configuration Wire Color Wire Function Green Right turn Brown Tail lights Black Battery power Red Brake White Ground Yellow Left turn Powered Tail Light Converter Installation This kit comes with all the wiring you'll need to convert your vehicle's lighting system to match your trailer's.
Waterproof trailerlightkit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Sealed, waterproof construction is submersible Durable surface-mount diode (SMD) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Stud mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL39RB Passenger side: STL38RB Light dimensions: 5-1/16" long x 4-9/16" tall x 2-5/8" deep Light face: 4-9/16" x 4-9/16" Distance between mounting studs (center on center): 2" Diodes: Driver's side: 10 Passenger's side: 7 Power draw at 12.8 volts: Stop and turn lights: 0.259 amps Side marker lights: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof trailerlightkit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.Features: Rectangular combination tail lights serve 7 functions when properly mounted on trailers under 80" wide Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Waterproof housing and lens unit is submersible Great for marine trailer applications LEDs make great replacements for incandescent lights No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Universal mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80" wide Driver side: STL57RB Passenger side: STL56RB Light dimensions: 6-1/16" wide x 3-5/8" tall x 2-1/4" deep Number of diodes: Driver's side: 23 Passenger's side: 18 Power draw at 12.8 volts: Stop and turn lights: 0.268 amps Side marker lights: 0.059 amps Lifetime warranty on LEDs Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Powered by Your Battery This converter won't overload or cause damage to your system because it pulls power straight from your vehicle's battery. So you can be sure that your trailerlights will activate no matter what type of bulbs your vehicle has - or your trailer, for that matter. Converter Wiring Configuration Wire Color Wire Function Green Right turn Brown Tail lights Black Battery power Red Brake White Ground Yellow Left turn Powered Tail Light Converter Installation This kit comes with all the wiring you'll need to convert your vehicle's lighting system to match your trailer's.
Hello Brian, thanks for reaching out. The longest Marine Slides we offer are the 8' long like part #TD99FR. I am sorry to say we do not offer anything 12' long.
Many states in the U.S. and provinces in Canada require break away kit. In order to determine the specifics for where you live and where you plan to travel, you can check with the state and federal departments of transportation for the area. Specific…
Yes these are the right and left hand side lights. Because of the side marker light on the side of the lamp, Part #STL8RB should only be used for the right hand tail light. The left LED taillight would be part #STL9RB. For install details and some…
Thanks for the pictures! Based on the pictures you sent it appears you have an older Valley Industries weight distribution system. I have a replacement option for you, but since Valley Industries is out of business there are no replacement parts…
The blinker/brake lights are carried on one circuit and the running lights are on a totally different one. Since the stop/turn circuits seem to work on the left side but the running lights on that side do not you need to check the wiring of the…
I measured from the center of the mounting studs to the top of the lights that come with the Peterson Light Kit #M540 and it is 2-1/2". Just to make sure, I also measure the Optronics Under 80" Trailer Light Kit with 25' Wiring Harness…
For the assemblies that come with the Submersible, Under 80" LED Trailer Light Kit part #TLL9RK that you referenced the white wires will need to be grounded, the brown wires will run to the running lights circuit, the green wire will run to the…
Hey Curtis! Yes, the etrailer Trailer Hitch Receiver #e98845 comes with the fishwire/bolt leader. All of the hardware pictured below, including the fishwire, will come with the trailer hitch. This is confirmed to fit your 2018 Dodge Journey. Do you…
Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…
To mount an under slung axle like the Dexter Trailer Axle #8327826-EB below a set of the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e88SR you will need an over-under kit. The Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00 will…
Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…
Hello Lance, thanks for reaching out. When replacing shackle straps and equalizers, the replacement parts must be identical in size to the original. Since your current shackles are 3.5" long, you will NOT be able to use the 2-1/4" shackles…
Trailerkit with 2 stud-mount, submersible tail lights; corrosion-resistant license-plate bracket; 2 amber side marker and clearance lights; 25' wiring harness with 4-pole connector; mounting hardwareFeatures: Red, submersible, trailerlightkit with stud mount lights, license bracket, amber clearance lights, wiring harness, mounting hardware 2 Red, stud-mount, submersible tail lights (ST6RB and ST7RB) Driver's-side light includes license illuminator Corrosion-resistant license-plate bracket 2 Amber, stud mount, square side marker and clearance lights (MC36AB) Self-grounding through mounting stud Lights include reflectorized lenses, eliminating the need for separate reflectors to meet DOT requirements 25' Wiring harness with 4-pole connector Mounting hardware included DOT approved Limited 3-year warranty - excludes bulbs Note: Lights included in this kit pull 2.5 amps for stop/turn function and 1 amp for tail signal.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Highlights Simple Setup: Plug the transmitter into your vehicles 4-way to send signals wirelessly. Battery Powered: Lamps run on batteries, so no wiring to the trailer is needed. Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle. All Signal Functions: Stop, turn, and tail lights provide everything you need for towing.
2-1/8" x 1-3/8" x 1-3/4". Waterproof trailerlight illuminates your license plate. Clear lens under polycarbonate housing. Recessed mount with included bracket and grommet. 2-wire design with.180 male bullets.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
Trailerkit with 2 stud mount tail lights; 2 stud mount amber clearance lights; license plate bracket; wire harness w/4-pole connectorStandard TrailerLightKit with 25' Wire Harness This is a stud-mounted trailerlightkit. The kit contains two stud-mount tail lights, two stud-mount, amber clearance marker lights, a corrosion-proof license plate bracket, and a 25' wire harness with a 4-pole trailer connector.
Haul your large boat trailer safely, with these 1" diameter, submersible lights that act as an identification light system, which is designed to indicate to other drivers that your trailer is 80" or wider.Features: LED identification lightkit improves road safety by alerting other drivers that your trailer is over 80" wide Sealed, waterproof units include durable, polycarbonate housings and UV-resistant lenses Military-grade construction of circuit boards Urethane potting offers better protection than common epoxy potting Red lenses over red LEDs Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation 12V DC compatible Recessed-mount installation - hardware not included Hardwires to trailer Meets or exceeds FMVSS 108 standards Assembled in the USA Specs: Quantity: 3 lights Individual light dimensions: 1" diameter x 7/8" thick Diodes: 1 per light Input voltage (per light): 9V - 14V Power draw (per light): 0.06 - 0.08 amps Wire length: 48" IP rated: 68 Limited lifetime warranty Sealed, Waterproof TrailerLights The waterproof construction of these lights make them ideal for use on boat trailers because they often get submerged.
6-1/2" x 2-1/4" Oval. Waterproof, incandescent trailer tail light functions as a stop, turn, and tail light. Durable polycarbonate lens is welded to housing. Flush mount with included grommet and industry-standard 3-prong plug. (1) Bulb.Features: Trailerlight provides 3 functions: Stop, turn, and tail light Sealed, waterproof housing and lens unit Red lens over incandescent bulb Compatible with 12V DC systems Flush mount with included grommet Mounts in any 360-degree position Industry-standard 3-prong plug connects light to trailer Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 2-3/8" thick Bulb type: dual-filament Power draw at 12V: Stop/turn: 2.1 amps Tail: 0.59 amps Limited 1-year warranty Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
5-3/8" x 4-5/8" Square. Waterproof, LED lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers over 80". ... The circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailerlights.
Waterproof trailerlightkit with (3) 3/4" diameter lights that work as identification lights when properly mounted on trailers over 80" wide. ... Features: Trailerlightkit functions as rear identification lights for trailers over 80" wide Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lenses and housings Clear lenses over red LEDs Compatible with 12V DC systems Recessed mount with included black grommets Requires a 3/4" diameter hole for each light 2-Wire molded harness includes power lead and ground wire PC rated light produces a 180-degree beam pattern DOT compliant Specs: Application: trailers over 80" wide Quantity: 3 red lightsLight dimensions: 3/4" diameter x 7/8" deep Grommet diameter: 11/16" Wiring harness length: 29" Diodes per light: 1 Power draw at 12.8V: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this lightkit makes it ideal for use on trailers that may be submerged, like a boat trailer.
4-1/8" x 1-1/4" Rectangle. Waterproof, incandescent trailerlight functions as both a clearance light and a side marker light. Premium bulbs for long life. Surface mounts with included bracket and lead wire. ... When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light. Surface Mount Light Installation Surface mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Powered by Your Battery This converter won't overload or cause damage to your system because it pulls power straight from your vehicle's battery. So you can be sure that your trailerlights will activate no matter what type of bulbs your vehicle has - or your trailer, for that matter. Converter Wiring Configuration Wire Color Wire Function Green Right turn Brown Tail lights Black Battery power Red Brake White Ground Yellow Left turn Powered Tail Light Converter Installation This kit comes with all the wiring you'll need to convert your vehicle's lighting system to match your trailer's.
Waterproof trailerlightkit with (3) 3/4" diameter lights that work as identification lights when properly mounted on trailers over 80" wide. ... Features: Trailerlightkit functions as front identification lights for trailers over 80" wide Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lenses and housings Clear lenses over amber LEDs Compatible with 12V DC systems Recessed mount with included black grommets Requires a 3/4" diameter hole for each light 2-Wire molded harness includes power lead and ground wire PC rated light produces a 180-degree beam pattern DOT compliant Specs: Application: trailers over 80" wide Quantity: 3 amber lightsLight dimensions: 3/4" diameter x 7/8" deep Grommet diameter: 11/16" Wiring harness length: 29" Diodes per light: 1 Power draw at 12.8V: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this lightkit makes it ideal for use on trailers that may be submerged, like a boat trailer.
Quickly and easily connect your towed car's lighting system to your RV to activate the signal lights required for towing. This custom harness plugs directly into your towed vehicle's existing wiring - no cutting or splicing required.Or you could just plug in the Trailer Mate wiring harness. This custom-fit system plugs into your towed vehicle's existing wiring harness, which is located behind your car's tail light assemblies.
4-3/4" x 4-1/2" Square. Incandescent trailerlightkit provides all legal lighting and reflectors for trailers under 80". Includes combination tail lights and side markers. ... Features: Trailerlightkit provides all legal lighting and reflectors for trailers under 80" wide 2 Square combination tail lights provide 6 functions Stop, tail, turn, side marker, side reflex, and rear reflex Built-in license plate light on driver's-side light illuminates license plate 2 Rectangular marker lights are included to provide rear clearance light function Built-in reflex reflector removes the need for a separate reflector Incandescent bulb can be easily replaced Compatible with 12V DC systems Mounts on surface of trailer with included studs Includes license plate bracket for mounting driver's side light 20' Wiring harness for making connections DOT compliant PC rated Made in the USA Specs: Tail lights: Dimensions: 4-3/4" long x 4-1/2" tall x 2-13/16" deep Distance between mounting studs (center on center): 2" Power draw at 12V: 2.2 amps Bulb type: 1157 and 168 Clearance lights: Dimensions: 2-3/4" long x 2-1/8" tall x 1" deep Power draw at 12V: 0.25 amps Bulb type: 194 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Wesbar # 7504 Optronics # TL27BK PC-Rated Lights A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage.
Waterproof identification lightkit with (3) 3/4" diameter red LEDs is designed for trailers wider than 80". Supplemental brake function - lights brighten when brake pedal is pressed. ... Features: Trailerlightkit functions as an identification light for trailers wider than 80" Supplemental brake function - lights brighten when brake pedal is pressed Black molded wiring harness with 3 red Uni-Lites Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lenses and housings Recessed mount with included black grommets Installation requires a 3/4" diameter hole for each light 3-Wire molded harness 0.18 male bullets White wire for ground Black wire for tail light Red wire for brake light DOT compliant P2 rated Uni-Lites Specs: Individual light dimensions: 3/4" diameter x 7/8" deep Grommet diameter: 11/16" Approximate wiring length: Overall: 198" Per light: 15" Diodes: 3 (1 per light) Power draw at 12.8 volts: 0.047 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this lightkit makes it ideal for use on trailers that may be submerged, like a boat trailer.
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailerlights.
Install a 4-way trailer connector on your vehicle with this wiring harness with tail light converter. Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. ... Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Installs with kit 55151 (sold separately) to help run wiring to vehicle battery Color-coded wires ease installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tapping screw Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
4-1/4" Round. Weatherproof, incandescent trailer tail light serves as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. ... These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole.
Filters
