Carry two bikes, including heavier e-bikes, behind your RV with a rack that's rated for the extra bounce. Holds up to 80 lbs per bike (70 lbs in RV mode), fits fat tires, tilts for hatch access, locks up, and works with an optional ramp.Highlights Rated for RV and Trailer Use: Made for the extra bounce you get behind a trailer or motorhome. Bring Your E-Bike and Your Riding Buddy's Too: Holds 2 bikes up to 80 lbs each for heavier bikes.
Carry 2 bikes, including heavier e-bikes, behind your RV with a rack that's rated for the extra bounce. Add-on expands it to 4 bikes. Fits fat tires, tilts for hatch access, locks up, and works with an optional ramp. Fits 2" hitches.Highlights Rated for RV and Trailer Use: Made for the extra bounce you get behind a trailer or motorhome. Bring Your E-Bike and Your Riding Buddy's Too: Holds 2 bikes up to 80 lbs each for heavier bikes.
We've handled a lot of racks and can confidently say the RV Rider is one of the few that can carry a couple 80-lb fat-tire e-bikes on the back of a motorhome or 5th wheel. It's sturdy, versatile, and a steal for the value it provides.Features: Platform bike rack carries 2 e-bikes using your vehicle's hitch receiver Perfect for camping trips in your motorhome or 5th wheel trailer Not compatible with bumper pull or travel trailers Padded clamps with hand knobs hold bikes securely by the frame or seat post Cradles slide up and down and rotate to fit almost any bike Adjustable wheel hoops with ratchet straps slide back and forth to eliminate bike-to-bike contact Universal hoops fit standard and fat tires Hand knobs allow for easy adjustments - no tools required Hand knob and removable bolt allow rack to tilt and fold Tilts down without bikes loaded to access cargo area Keyed-alike hitch lock, frame clamps, and cable lock deter theft of your bikes and the rack Anti-rattle hitch pin and hitch tightener reduce movement of rack in hitch receiver Bolstered steel construction with black powder coat is rust resistant Specs: Application: 2" x 2" hitch receivers 5th Wheel application: Minimum trailer hitch tongue weight: 350 lbs Minimum vehicle length: 24' Minimum GVW = 5,000 lbs Carrying capacity: 2 electric bicycles Weight capacity: 80 lbs per bike Maximum tire width: 5" Maximum wheelbase: 60" Bike tube diameter: 1" - 2" Distance between bikes: 10" Distance from center of hitch pin hole on standard shank to: Closest part of rack when folded down: 12" Closest part of rack when folded up: 7-1/2" Farthest part of rack when folded down: 32" Farthest part of rack when folded up: 18-1/4" Carrier weight: 63.5 lbs Limited lifetime warranty Notes: Does not work with 1-1/4" to 2" hitch adapters.
This 2-bike rack with tail lights is perfect for carrying bikes of nearly any style, including heavy electric bikes with fenders. Integrated wheels let you roll the rack, so you don't have to carry it to your vehicle. Tilts with bikes loaded.Rear Wheel or Frame Mount The Thule Epos has telescoping masts with padded, rotating heads and ratcheting straps that grab your bikes firmly by the rear wheels or by the frames.
This lightweight 2-bike rack is perfect for the occasional rider with limited storage space in their garage. The wheel trays fold up, so it easily fits into a closet. It also accommodates bikes with a long wheelbases.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Padded hooks on ratcheting arms hold bikes securely by the frame Sliding wheel hoops with rubber security straps let you carry bikes with different wheelbases Fat bike hoops (sold separately) let you carry bikes with 5" tires Pull pins allow mast to fold down and wheel trays to fold up for storage Anti-rattle hitch pin reduces movement of rack in hitch receiver Removable adapter sleeve lets you convert the rack for use in 1-1/4" hitches Hitch lock and cable lock (sold separately) deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 1-1/4" x 1-1/4" (Class II) and 2" x 2" trailer hitches Carrying capacity: 2 bikes Weight capacity (per bike): 35 lbs Maximum tire width: 2.5" Maximum wheelbase: 66" Minimum wheel base: 27-1/2" Shank rise: 3" Distance from center of hitch pin hole to: Closest wheel hoop: 8" Farthest edge of carrier: 17" Carrier weight: 29.7 lbs Limited lifetime warranty Padded, Ratcheting Hooks The XTC-2's mast has a pair of ratcheting hooks that hold your bikes securely by the top tube.
This lightweight 2-bike rack is perfect for the occasional rider with limited storage space in their garage. The wheel trays fold up, so it easily fits into a closet, and you can tilt it with your bikes loaded for rear cargo area access.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Padded hooks on ratcheting arms hold bikes securely by the frame Sliding wheel hoops with rubber security straps let you carry bikes with different wheelbases Fat bike hoops (sold separately) let you carry bikes with 5" tires Pull pins allow mast to fold down and wheel trays to fold up for storage Tilts down with bikes loaded to access cargo area Anti-rattle hitch pin reduces movement of rack in hitch receiver Removable adapter sleeve lets you convert the rack for use in 1-1/4" hitches Hitch lock and cable lock (sold separately) deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 1-1/4" x 1-1/4" (Class II only) and 2" x 2" trailer hitches Carrying capacity: 2 bikes Weight capacity (per bike): 35 lbs Maximum tire width: 2.5" Maximum wheelbase: 52" Wheel diameter: 20" - 29" Shank rise: 3" Distance from center of hitch pin hole to: Closest wheel hoop: 8" Farthest edge of carrier: 17" Carrier weight: 30 lbs Limited lifetime warranty Padded, Ratcheting Hooks The XTC-2 Tilt's mast has a pair of ratcheting hooks that hold your bikes securely by the top tube.
Heavy-duty e-bike rack has a ramp that lets you load your bikes with no lifting required. It folds up for compact storage, and it has built-in handles and wheels for easy transport. Rack tilts with bikes loaded for cargo area access. Locks included.Clamps with built-in Road Dampening Technology (RDT) pads grab your bikes by the top tubes or downtubes to ensure safe transport with minimal movement and noise. The clamps can be rotated to grab bike frames with angled downtubes. The clamps include AcuTight knobs that click when they are tight around your bike frames. This prevents you from damaging your bike by over-tightening the knobs.
This versatile rack has a heavy-duty frame that supports 2 e-bikes and extra-wide cradles that accommodate fat bikes. It's also great for carrying nearly any other type of bike.Features: Platform bike rack carries 2 e-bikes using your vehicle's hitch receiver Also accommodates fat bikes Padded hooks hold bikes securely by the frame Ratcheting hooks slide up and down to fit almost any bike Sliding wheel cradles with ratcheting straps let you carry bikes with different wheelbases Spring-loaded release levers allow rack to tilt and fold Tilts down with bikes loaded to access cargo area Anti-rattle hitch pin reduces movement of rack in hitch receiver Removable adapter sleeve converts the rack for use with 1-1/4" hitches Keyed-alike locks deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 1-1/4" x 1-1/4" (Class II only) and 2" x 2" trailer hitch receivers Carrying capacity: 2 bikes Weight capacity: 60 lbs per bike Maximum tire width: 5.0" Wheel diameter: 20" - 29" Maximum wheelbase: 50" Distance from center of hitch pin hole to: Closest part of rack when unfolded: 12-3/4" Farthest part of rack when unfolded: 29-1/2" Closest part of rack when folded: 5-3/4" Farthest part of rack when folded: 18" Carrier weight: 49 lbs Shank rise: 8-1/2" Limited lifetime warranty Padded, Ratcheting Hooks The Current's mast has a pair of ratcheting hooks that hold your bikes securely by the top tube.
This 2-bike rack is perfect for carrying bikes of nearly any style, including heavy electric bikes with fenders. Integrated wheels let you roll the rack, so you don't have to carry it to your vehicle. Tilts with bikes loaded.Rear Wheel or Frame Mount The Thule Epos has telescoping masts with padded, rotating heads and ratcheting straps that grab your bikes firmly by the rear wheels or by the frames.
Swagman Escapee Pro is a hitch-mounted platform rack for 4 bikes up to 45 lb each, with an external tilt and fold handle, anti-wobble design, and support for 20 to 29 inch wheels up to 5 inches wide.Highlights Bring the Whole Crew: Carries 4 bikes, up to 45 lbs each, so you can travel with friends or family without taking two vehicles. Built for RV and Trailer Use: Made for the extra bounce you get behind a trailer or motorhome, so your bikes ride steadier on rough roads. Access Cargo Without Unloading: External handle lets you tilt down to open your hatch or drop your tailgate.
Heavy bikes, tight fits, blocked lights: solved. This rack adapts to any bike, tilts for cargo, locks up and rides quiet, and even rolls to your hitch so you don't have to carry it.Highlights Handles Every Bike Style: Secure carbon frames by the wheels, bikes with fenders by the frame, and carry kids' bikes with no problem. Built-In LED Tail Lights: Integrated lights and plate mount keep you visible and legal on the road.
This 3-bike rack is perfect for carrying bikes of nearly any style, including heavy electric bikes with fenders. Integrated wheels let you roll the rack, so you don't have to carry it to your vehicle. Tilts with bikes loaded.Rear Wheel or Frame Mount The Thule Epos has telescoping masts with padded, rotating heads and ratcheting straps that grab your bikes firmly by the rear wheels or by the frames.
... Most racks force a specific order, especially with non-standard bike frames, but the Shifts&Grins adjusts to your setup so you spend less time swapping spots and more time riding.Spend Less Time Setting Up, More Time Riding Installing a bike rack can be a pain - wrestling with a heavy frame, trying to get the hitch pin holes to match up. Not with the Shifts&Grins. The hitch alignment collar guides the shank into place quickly, and the D-shaped anti-rattle hitch pin can be tightened down with one hand, so you can secure the rack in seconds and get on with your ride.
Why struggle with a heavy, oversized rack when you're only hauling one bike? The LittleShift is built for cyclists who want a quick, simple way to transport their ride, without wasted space or a complicated setup. Just load up and head out.The LittleShift skips the extra joints, keeping the rack itself sturdy and steady no matter what road lies ahead. With a reinforced frame, anti-rattle hitch pin, and three points of contact with your ride, everything stays firmly in place, keeping both the rack and your bike secure from start to finish.
Loading 4 bikes shouldn't be a puzzle. Most racks force a specific order, but the Shifts&Grins lets you load your way. Plans change? Drop to 2 bikes in seconds - just loosen the knob and slide off the add-on. No tools, no hassle, just ride.The Shifts&Grins adapts to any setup, so you don't have to force a perfect order. Ratcheting hooks grab your bikes by the wheel or frame, while sliding wheel cradles move independently to match any combination of sizes and styles. Just set, secure, and go. Effortless Cargo Access: Tilt with a Nudge, Not a Struggle Reaching your gear shouldn't mean unloading your bikes or wrestling with a clunky mechanism.
... Most racks force a specific order, especially with non-standard bike frames, but the Shifts&Grins adjusts to your setup so you spend less time swapping spots and more time riding.Spend Less Time Setting Up, More Time Riding Installing a bike rack can be a pain - wrestling with a heavy frame, trying to get the hitch pin holes to match up. Not with the Shifts&Grins. The hitch alignment collar guides the shank into place quickly, and the D-shaped anti-rattle hitch pin can be tightened down with one hand, so you can secure the rack in seconds and get on with your ride.
Why struggle with a heavy, oversized rack when you're only hauling one bike? The LittleShift is built for cyclists who want a quick, simple way to transport their ride, without wasted space or a complicated setup. Just load up and head out.Plus, the D-shaped hitch lock secures the rack to your hitch. Specs Application: 2" Trailer hitch receivers Capacity: Bikes: 1 Weight: 80 lbs Maximum tire width: 4" Maximum wheelbase: 50" Wheel diameter: 20" - 29" Rack Weight: 25 lbs Warranty: Lifetime limited
This easy-to-use hitch bike rack is an efficient way to get 4 bikes to the trail. Curved wheel trays and adjustable frame clamps fit a wide variety of bikes. Anti-rattle, locking hitch pin reduces rack movement while driving.Padded, Rotating Holders The Destination rack uses rotating frame holders to secure your bikes. The rubber padded holders rotate 360 degrees, and move up and down the center mast independently, to accommodate frames of various shapes and sizes.
This hitch bike rack makes it easy to take 2 e-bikes to the trail. Ratcheting hooks hold your bikes securely by the frame and lock to deter theft. Wheel hoops adjust for different wheelbases. Anti-rattle system reduces wobble and sway.Features: Platform bike rack carries 2 e-bikes using your vehicle's hitch receiver Ratcheting hooks on center mast hold bikes securely by the frame Bike frames without a "top tube", such as step thru and utility bikes will require an adapter bar (sold separately) Adjustable wheel hoops with ratchet straps slide back and forth to eliminate bike-to-bike contact Hand knobs allow for easy adjustments - no tools required Adapter included for 20" bike wheels Spring pins and removable snapper pin allow rack to tilt and fold Tilts down with bikes loaded to access cargo area Welded stop plate automatically aligns shank and hitch pin holes Eliminates need to get on your hands and knees to align hitch pin holes Anti-rattle handle reduces movement of rack in hitch receiver - no tools required Keyed-alike hitch lock, frame hooks, and security cable deter theft of your bikes and the rack Bolstered steel construction with black powder coat is rust resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 2 electric bicycles Weight capacity: 80 lbs per bike Maximum tire width: 5.0" Maximum wheelbase: 60" Distance between bikes: 10" Shank rise: 7" Distance from face of hitch to: Closest part of rack when folded down: 7-1/2" Closest part of rack when folded up: 5" Farthest part of rack when folded down: 27-1/2" Farthest part of rack when folded up: 16-1/4" Carrier weight: 54 lbs Limited lifetime warranty Notes: Cargo bikes with running boards will need the running boards from one side removed before mounting the bike to the rack.
This 2-bike rack has an integrated ramp that lets you easily roll your heavy electric bikes up and onto the trays - no lifting required. When you're done simply remove the ramp and store it onboard. Tilts with bikes loaded for cargo area access.Features: Platform bike rack carries 2 e-bikes using your vehicle's hitch receiver Integrated ramp lets you easily roll heavy bikes onto the rack Stores behind bike trays when not in use - no storage issues or risk of loss Padded clamps with ratcheting straps hold bikes securely by the frame or seat post Sliding wheel straps let you carry bikes with different wheelbases Adjustable trays slide side-to-side for optimal bike spacing - no tools required Rear-mounted spring pin lets you tilt and fold the rack Tilts with bikes loaded to access cargo area Anti-rattle hitch pin reduces movement of rack in hitch receiver Same Key System (SKS) locks deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 2 bikes Weight capacity: 80 lbs per bike Off-road rated: 48 lbs per bike RV rated: 80 lbs per bike Maximum tire width: 5" Maximum wheelbase: 54" Wheel diameter: up to 29" Maximum ramp length: 51" Distance from center of hitch pin hole to: Farthest part of rack when folded up: 12" Farthest part of rack when folded down: 30-1/2" Closest part of rack when folded up: 6" Closest part of rack when folded down: 10-3/4" Carrier weight: 53.5 lbs Limited lifetime warranty
This platform rack is perfect for carrying heavy electric bikes. It includes a telescoping loading ramp that lets you easily roll your bikes onto the rack. Tilts nearly 90 degrees with bikes loaded for superior cargo area access.They move up and down the center mast independently, so you can position them to fit bikes of any frame style. Curved Trays for Easy Loading Curved wheel trays allow you to easily roll your bikes onto the rack. The trays also have wide cradles that accommodate most bike tire sizes.
This basic, lightweight 2-bike rack is perfect for the occasional rider with limited storage space in their garage. The wheel trays fold up, so it will easily fit into a closet. The mast folds down for easy access to your rear cargo area.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Padded hooks on ratcheting arms hold bikes securely by the frame Sliding wheel hoops let you carry bikes with different wheelbases Pull pins allow mast to fold down and wheel trays to fold up for storage Anti-rattle hitch pin reduces movement of rack in hitch receiver Removable adapter sleeve lets you convert the rack for use in 1-1/4" hitches Hitch lock and cable lock (sold separately) deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 1-1/4" x 1-1/4" (Class II) and 2" x 2" trailer hitches Carrying capacity: 2 bikes Weight capacity (per bike): 35 lbs Maximum tire width: 2.5" Maximum wheelbase: 52" Shank rise: 3" Distance from center of hitch pin hole to: Closest wheel hoop: 10" Farthest edge of carrier: 23" Carrier weight: 25 lbs Limited lifetime warranty Padded, Ratcheting Hooks The XC's mast has a pair of ratcheting hooks that hold your bikes securely by the top tube.
This hitch bike rack makes it easy to take 2 bikes to the trail. Ratcheting hooks hold bikes securely by the frame and lock to deter theft. Wheel hoops adjust for different wheelbases. Anti-rattle, locking hitch pin reduces wobble and sway.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Ratcheting hooks on center mast hold bikes securely by the frame Adjustable wheel hoops with ratchet straps slide back and forth to eliminate bike-to-bike contact Hand knobs allow for easy adjustments - no tools required Removable pins allow bike trays to fold up for storage Adapter sleeve enables rack to fit both 1-1/4" and 2" hitches Anti-rattle hitch pin reduces movement of rack in hitch receiver Keyed-alike hitch lock and frame hooks deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" (Class III) trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity: 45 lbs per bike Maximum tire width: 3.0" Maximum wheelbase: 60" Distance between bikes: 10" Shank rise: 5" Distance from center of hitch pin hole to: Closest part of rack when folded up and down: 12-1/8" Farthest part of rack when folded up and down: 29-1/4" Carrier weight: 36.25 lbs Limited lifetime warranty The Trail Rider platform-style hitch bike rack makes it simple to carry 1 or 2 bicycles on the rear of your vehicle.
Bike racks can be a pain to live with. Many are too heavy to carry down the stairs and too bulky to store without getting in the way. The OutPace is light enough to carry like a suitcase and compact enough to tuck in a closet, trunk, or on a shelf.Adjusts to Fit Your Setup The arms pivot to match the angle and position of your bikes' frames, so you don't have to shift things around just to get the clamps lined up. It doesn't matter if one's a step-through and the other's a mountain bike, your bikes load without any trial-and-error positioning.
Filters
