Replaces the trailer jack wheel for your Demco Kar Kaddy SS (DM9713045) tow dolly or the add-on jack for Demco tow dollies (DM11683).Features: Replaces the trailer jack wheel for your Demco Kar Kaddy SS (DM9713045) tow dolly Also works with the optional add-on jack for Demco tow dollies (DM11683) Quantity: 1 wheel
Use your Trailer Valet side-mount dolly or drill-powered jack on your large trailer too. This bracket lets you mount your 5X or JXS Series on a trailer frame up to 5" wide x 8" tall.Features: Mount your Trailer Valet dolly or jack on a trailer frame up to 5" wide x 8" tall Works with Trailer Valet 5X and JX5-S Series, side-mount units Includes the elbow joint to turn your XL, MV Pro, or RVR Series dolly into a side-mount model Get ultimate protection with durable, rust-resistant wrinkle black powder coat finish Easily install on your frame with the included hardware Specs: Bracket dimensions: 8" tall x 9-3/8" wide Bolt holes spaced 7-1/2" apart on center horizontally Bolt type: M10 x 150-mm carriage bolt
... Fits 12" wheels.The premium rubber compound materials of this tire help disperse heat. Radial Tires vs. Bias Tires Radial ply tires are designed for trailers that are towed on the highway. The cords on a radial tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip.
... Great for highway use. Fits 15" wheels.A protective layer of nylon is wrapped around the steel belts to help prevent tread separation. Radial Tires vs. Bias Tires Radial ply tires are designed for trailers that are towed on the highway. The cords on a radial tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip.
Radial special trailer tire provides excellent traction for a safe, smooth ride in both wet and dry conditions. 5-Rib design supports even wear. Fits 15" wheels and has a maximum load capacity of 2,860 lbs at 50 psi.If within the first 12 months the tire is damaged in any way, it will be replaced at no charge. Radial Tires vs. Bias Tires Radial ply tires are designed for trailers that are towed on the highway. The cords on a radial tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip.
This bearing and race kit has everything to replace the bearings on 1 wheel of your small trailer axle rated from 2,000 lbs to 2,500 lbs with 1" BT8 spindle. Includes inner and outer bearings and races, grease seal, cotter pin, and drive in cap. L44643 L44610 L44643 L44610 204507 1.249" 1.983" This replacement bearing and race kit contains all components needed to replace the bearings on one hub of your small trailer axle rated from 2,000 lbs to 2,500 lbs with 1" BT8 spindles. Kit includes inner and outer bearings and races, seal, cotter pin, and grease cap.
Transforms your Montague Rackstand into a handy travel dolly for your bike. Attaches to your Rackstand (RACKSTAND - sold separately) in seconds with no tools. Works well for moving your bike through crowded or indoor areas.Features: Transforms your Montague Rackstand into a handy travel dolly for your bike Attaches to your Rackstand (RACKSTAND - sold separately) in seconds with no tools Works well for moving your bike through crowded or indoor areas like a train station, bus stop, or the office
Replaces 1 solid rubber tire that came with your Trailer Valet trailerdolly. Works for models XL, XL Pro, 5X, and MV. Deep treads allow extra grip for more stability on gravel, grass, and uneven surfaces.Features: Replacement tire for your Trailer Valet trailerdolly models XL, XL Pro, 5X, and MV TVXL25, TVXL2, STC-V211, TVXLV2, or TVMVPRO Solid rubber construction lasts longer and handles better than inflatable tires Deep treads allow extra grip for more stability on gravel, dirt, and grass Specs: Tire size: 2.80/2.50-4 Diameter: 9" Maximum load: 500 lbs Quantity: 1 tire
Replaces the brake cap and steering handle on your Trailer Valet 5X swivel jack and trailer mover. Allows you to direct your trailer around tight corners. Brake automatically engages when steering handle is released to keep your trailer from rolling.Features: Replaces the brake cap and steering handle on your Trailer Valet 5X swivel jack and trailer mover (STC-V211) Steering handle helps you guide the trailerdolly Automatic brake keeps trailer from rolling Engages when the handle is released for superior safety Rugged steel construction with silver powder coat and zinc-nickel plating resists rust 300-Hour salt spray rating
Your arm stalls mid-crank trying to lift a loaded boat trailer at the ramp. Been there. This 1,500 lb aluminum swivel jack accepts a 3/4" socket so a drill does the lifting. The wheel rolls the trailer into place and holds up to saltwater use.A Wheel for Small Positioning Adjustments The built-in wheel makes it easier to roll the tongue a short distance when you're lining up with the hitch ball or shifting the trailer in the driveway or storage area.
This bearing and race kit has everything to replace the bearings on 1 wheel of your trailer axle rated for 3,500 lbs. Works with Lippert, Dexter, or AL-KO 3,500-lb axles with #84 spindle. L44649 L44610 L68149 L68111 10-19 1.719" 2.565" This replacement bearing and race kit contains all components needed to replace the bearings on one hub of your trailer axle rated for 3,500 lbs. Kit includes inner and outer bearings and races, seal, cotter pin, and tang washer for EZ lube spindles.
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Offers twice the stability of single-wheel jacks Wheelbase turns a full 360 degrees Swings up and down smoothly J-bolt handle lets you position jack quickly Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames 2" to 4" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 12-5/8" Extended: 23" Lift: 10-3/8" Handle radius: 6-1/2" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Dual-wheel dimensions: 5-3/4" diameter x 4" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Creates a stylish flair with the spoked wheel Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailers frames 2" to 4" tall Lift capacity: 1,200 lbs Bracket height: Retracted: 12-1/2" Extended: 23-1/2" Lift: 11" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Handle radius: 6-5/8" Wheel dimensions: 5-3/4" diameter x 2" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 6,000 lb trailer axle. Includes inner and outer bearings and races, seal, and cotter pin.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Creates a stylish flair with the spoked wheel Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailers frames 2" to 4" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 13" Extended: 23" Lift: 11" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Handle radius: 6-1/4" Wheel dimensions: 7-5/8" diameter x 2-1/16" wide 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion with clear zinc finish Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames 2" to 4" tall Lift capacity: 1,000 lbs Bracket height: Retracted: 13-1/2" Extended: 23-1/2" Lift: 10" Outer tube diameter: 2" Inner tube diameter: 1-3/4" Wheel dimensions: 5-3/4" diameter x 2" wide Handle radius: 7" 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 7,000 lb axle. Includes inner and outer bearings and races, double-lip grease seal, cotter pin, and EZ lube spindle washer.
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 6,000 lb trailer axle. Includes inner and outer bearings and races, seal, cotter pin, and washer for EZ lube spindle.
Filters
