Experience stability while entering and exiting your RV with this folding handrail. The lightweight rail installs easily, and its drop-down leg accommodates your RV's height. Folds against the side of your RV and quickly removes for travel.Features: Lightweight handrail helps you to safely enter and exit your RV Adjustable drop-down leg adds up to 24" to the rail's height to accommodate taller RVs Secures with included pin at appropriate height Foldable rail rests against the side of your RV when not in use and easily removes for travel Remove bolt to fold or remove the rail Black powder coated steel is rust resistant Easy installation on your triple or quad manual steps Includes adjustable mounting bracket Made in the USA Specs: Rail dimensions: 38" tall (not including drop-down leg) x 25" wide Weight capacity: 250 lbs Length of drop-down leg: 24" Handrail length: 38" Rail diameter: 1-1/4" Weight: 16 lbs 1-Year warranty Note: This handrail cannot remain mounted on your RV during travel.
Sturdy RV steps adjust to rough terrain, eliminating the springboard effect and providing a wobble-free step into your camper. Easily detach for parking in a tight spot. ... That bounce occurs because those pull-out steps never touch the ground. Fold-down steps have adjustable legs that steady the steps on the ground, so you can feel safe using them.
Replace your RVs grab handle with a proper handrail that feels like your staircase at home. The lengthy 54" rail helps stabilize you from the first step. Folds flat against your RV with a sleek, low-profile look that won't obstruct the door.The photo above shows an awning bracket that is too close to the door trim, so the Safe-T-Rail cannot be installed here. There should be no obstructions within 1-7/8" under the door to fit the bottom bracket. This image shows the step well is far enough away.
6-1/4" Deep x 17" wide aluminum camper steps expand from 40" to 48" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. ... Features: Pull-out steps make it easy to get into or out of your towable or truck bed camper 5-Step assembly expands from 40" to 48" tall Scissor design lets you manually collapse steps and fold them up for travel Stairs self-adjust to the terrain for increased stability Hand rail (AHR5 - sold separately) can be added for even more stability Lightweight, heavy-gauge aluminum construction Diamond tread on each step surface provides solid footing Easy installation with included mounting bracket and hardware Secure the mounting bracket to your camper using the (4) 1/4" x 1-1/2" screws Clip the stairs into the "V" clamps on the mounting bracket Made in the USA Specs: Entry height: 40" - 48" Step dimensions: 17" wide x 6-1/4" deep Mounting bracket dimensions: 18" wide x 1" tall x 1" deep Drop/Rise: 8" Weight capacity: 250 lbs Note: These steps are only to be used while your vehicle is stationary and should not be mounted permanently.
... It extends far enough for you to grab hold before taking the first step up, and it folds flat without obstructing your door or slide out. Feels sturdier and looks better than what you're used to.Features: Telescoping handrail replaces the stock handle to give you something easier to reach 42" Rail length works best with 2- or 3- tread steps Folds up flat against your trailer and stays in place with a pin Does not block your door when not in use Pin attached by wire to the base, so you won't lose it easily Installs on the exterior of your RV with included mounting brackets and screws Separate upper and lower brackets help avoid obstructions next to your door Upper bracket has a subtle curve - works on flat or rounded RV walls Black powder-coated steel construction is rust resistant Single piece of metal used for rail, so it's nice and smooth Specs: Application: double and some triple stepsRail length: 42" Extends 34-1/4" from your RV wall Extended angle: 38 degrees Which size Lend-A-Hand Banister do I need?
... It extends out far enough for you to grab hold before taking the first step up, and it folds flat without obstructing your door or slide out. Can be set at a 45-degree angle to pair with steeper steps.Features: Telescoping handrail replaces the stock handle to give you something easier to reach 50" Rail length works best with 3- or 4-tread steps Two angle options match most RV steps Remove a factory-installed pin to give it a steeper angle Folds up flat against your trailer and stays in place with a pin Does not block your door when not in use Pin attached by wire to the base, so you won't lose it easily Installs on the exterior of your RV with included mounting brackets and screws Separate upper and lower brackets help avoid obstructions next to your door Upper bracket has a subtle curve - works on flat or rounded RV walls Black powder-coated steel construction is rust resistant Single piece of metal used for rail, so it's nice and smooth Specs: Application: some triple and all quad stepsRail length: 50" Extension length: 38 Degrees: 40-3/4" from your RV wall 45 Degrees: 36-3/4" from your RV wall Which size Lend-A-Hand Banister do I need?
If you only have a couple steps up outside your RV door, this shorter telescoping handrail will be a better size. The 48" rail folds flat against your RV with a sleek, low-profile look that won't obstruct the door.Features: Telescoping handrail replaces the stock grab handle to give you something that's easier to reach Extends 34" out from your RV to give you 48" of total rail length Fixed angle is sturdy and designed to be nearly parallel to MORryde StepAbove RV steps Folds up flat against your trailer and stays in place with a strong magnet Does not block your door when not in use Installs easily on the exterior of your RV with included mounting bracket and screws Black powder-coated steel construction is rust resistant Specs: Overall dimensions (folded): 2" long x 5-5/8" wide x 31" tall Upper bracket dimensions: 1-1/2" long x 2-3/16" wide x 2-15/16" tall Rail length: 48" Extends 34" from your RV wall Magnet force: 120 lbs 1-Year warranty Note: Intended for 5th wheels and travel trailers with flat, fiberglass walls.
8-1/2" Deep x 24" wide aluminum camper steps expand from 31" to 39" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. ... Features: Pull-out steps make it easy to get into or out of your towable or truck bed camper 4-Step assembly expands from 31" to 39" tall Scissor design lets you manually collapse steps and fold them up for travel Stairs self-adjust to the terrain for increased stability Hand rail (AHR4 - sold separately) can be added for even more stability Lightweight, heavy-gauge aluminum construction Non-slip tread on each step surface provides excellent footing Easy installation with included mounting bracket and hardware Secure the mounting bracket to your camper using the (4) 1/4" x 1-1/2" screws Clip the stairs into the "V" clamps on the mounting bracket Made in the USA Specs: Entry height: 31" - 39" Step dimensions: 24" wide x 8-1/2" deep Mounting bracket dimensions: 24" wide x 1" tall x 1" deep Drop/Rise: 8" Weight capacity: 300 lbs Note: These steps are only to be used while your vehicle is stationary and should not be mounted permanently.
6-1/4" Deep x 17" wide aluminum camper steps expand from 31" to 39" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. ... Features: Pull-out steps make it easy to get into or out of your towable or truck bed camper 4-Step assembly expands from 31" to 39" tall Scissor design lets you manually collapse steps and fold them up for travel Stairs self-adjust to the terrain for increased stability Hand rail (AHR4 - sold separately) can be added for even more stability Lightweight, heavy-gauge aluminum construction Diamond tread on each step surface provides solid footing Easy installation with included mounting bracket and hardware Secure the mounting bracket to your camper using the (4) 1/4" x 1-1/2" screws Clip the stairs into the "V" clamps on the mounting bracket Made in the USA Specs: Entry height: 31" - 39" Step dimensions: 17" wide x 6-1/4" deep Mounting bracket dimensions: 18-1/4" wide x 1" tall x 1" deep Drop/Rise: 8" Weight capacity: 250 lbs Note: These steps are only to be used while your vehicle is stationary and should not be mounted permanently.
8-1/2" Deep x 24" wide aluminum camper steps expand from 40" to 48" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. ... Features: Pull-out steps make it easy to get into or out of your towable or truck bed camper 5-Step assembly expands from 40" to 48" tall Scissor design lets you manually collapse steps and fold them up for travel Stairs self-adjust to the terrain for increased stability Hand rail (AHR5 - sold separately) can be added for even more stability Lightweight, heavy-gauge aluminum construction Non-slip tread on each step surface provides excellent footing Easy installation with included mounting bracket and hardware Secure the mounting bracket to your camper using the (4) 1/4" x 1-1/2" screws Clip the stairs into the "V" clamps on the mounting bracket Made in the USA Specs: Entry height: 40" - 48" Step dimensions: 24" wide x 8-1/2" deep Mounting bracket dimensions: 24" wide x 1" tall x 1" deep Drop/Rise: 8" Weight capacity: 300 lbs Note: These steps are only to be used while your vehicle is stationary and should not be mounted permanently.
6-1/8" Deep x 17" wide steel camper steps expand from 31" to 40" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. ... Features: Pull-out steps make it easy to get into or out of your towable or truck bed camper 4-Step assembly expands from 31" to 40" tall Scissor design lets you manually collapse steps and fold them up for travel Stairs self-adjust to the terrain for increased stability Hand rail (AHR4 - sold separately) can be added for even more stability Sturdy powder coated steel resists corrosion Diamond tread on each step surface provides solid footing Easy installation with included mounting bracket and hardware Secure the mounting bracket to your camper using the (4) 1/4" x 1-1/2" screws Clip the stairs into the "V" clamps on the mounting bracket Made in the USA Specs: Entry height: 31" - 40" Step dimensions: 17" wide x 6-1/8" deep Mounting bracket dimensions: 18-1/4" wide x 1" tall x 1" deep Drop/Rise: 8" Weight capacity: 275 lbs Note: These steps are only to be used while your vehicle is stationary and should not be mounted permanently.
6-1/4" Deep x 17" wide aluminum camper steps expand from 24" to 30" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. ... Features: Pull-out steps make it easy to get into or out of your towable or truck bed camper 3-Step assembly expands from 24" to 30" tall Scissor design lets you manually collapse steps and fold them up for travel Stairs self-adjust to the terrain for increased stability Hand rail (AHR3 - sold separately) can be added for even more stability Lightweight, heavy-gauge aluminum construction Diamond tread on each step surface provides solid footing Easy installation with included mounting bracket and hardware Secure the mounting bracket to your camper using the (4) 1/4" x 1-1/2" screws Clip the stairs into the "V" clamps on the mounting bracket Made in the USA Specs: Entry height: 24" - 30" Step dimensions: 17" wide x 6-1/4" deep Mounting bracket dimensions: 18-1/4" wide x 1" tall x 1" deep Drop/Rise: 8" Weight capacity: 250 lbs Note: These steps are only to be used while your vehicle is stationary and should not be mounted permanently.
6-1/8" Deep x 17" wide steel camper steps expand from 24" to 30" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. ... Features: Pull-out steps make it easy to get into or out of your towable or truck bed camper 3-Step assembly expands from 24" to 30" tall Scissor design lets you manually collapse steps and fold them up for travel Stairs self-adjust to the terrain for increased stability Hand rail (AHR3 - sold separately) can be added for even more stability Sturdy powder coated steel resists corrosion Diamond tread on each step surface provides solid footing Easy installation with included mounting bracket and hardware Secure the mounting bracket to your camper using the (4) 1/4" x 1-1/2" screws Clip the stairs into the "V" clamps on the mounting bracket Made in the USA Specs: Entry height: 24" - 30" Step dimensions: 17" wide x 6-1/8" deep Mounting bracket dimensions: 18-1/4" wide x 1" tall x 1" deep Drop/Rise: 8" Weight capacity: 275 lbs Note: These steps are only to be used while your vehicle is stationary and should not be mounted permanently.
8-1/2" Deep x 24" wide aluminum camper steps expand from 24" to 30" tall and fold up for storage. Steps self-adjust for stability on any terrain. Non-slip tread ensures solid footing. ... Features: Pull-out steps make it easy to get into or out of your towable or truck bed camper 3-Step assembly expands from 24" to 30" tall Scissor design lets you manually collapse steps and fold them up for travel Stairs self-adjust to the terrain for increased stability Hand rail (AHR3 - sold separately) can be added for even more stability Lightweight, heavy-gauge aluminum construction Non-slip tread on each step surface provides excellent footing Easy installation with included mounting bracket and hardware Secure the mounting bracket to your camper using the (4) 1/4" x 1-1/2" screws Clip the stairs into the "V" clamps on the mounting bracket Made in the USA Specs: Entry height: 24" - 30" Step dimensions: 24" wide x 8-1/2" deep Mounting bracket dimensions: 24" wide x 1" tall x 1" deep Drop/Rise: 8" Weight capacity: 300 lbs Note: These steps are only to be used while your vehicle is stationary and should not be mounted permanently.
Designed for motorhomes, this telescoping rail replaces the small grab handle by your door. The 3' rail gives you extra stability on your steps. Folds flat against the wall with a sleek, low-profile look that won't obstruct the door.Features: Telescoping handrail replaces the stock grab handle to give you something that's easier to reach Extends 16" out from your RV to give you 36" of total rail length Folds up flat against your trailer and stays in place with a strong magnet Does not block your door when not in use Installs easily on the exterior of your motorhome with included hardware Black powder-coated steel construction is rust resistant Specs: Overall dimensions (folded): 2-1/2" long x 2-1/4" wide x 28" tall Rail length: 36" Extends 16" from your RV wall Magnet force: 120 lbs 1-Year warranty
This 19" long x 14" wide aluminum platform step features 4 different height settings. Using push-button adjustments, each leg adjusts independently from 7-7/16" to 8-3/4" tall. ... Specs: Platform dimensions (not including legs): 19" long x 14" wide x 3-5/16" Weight capacity: 1,000 lbs Weight: 9 lbs 1-Year warranty Features: Sturdy grip replaces the foam grip on any 1" diameter handrail on your RV, vehicle, or boat Soft rubber molding provides a comfortable grip that outlasts standard foam Hard plastic and rubber construction is rot-resistant and provides long-lasting durability UV-protected coating prevents degradation in the sun Easy snap-and-lock installation - no tools required Align the 2 pieces around the handrail and snap into place Included tape strips prevent grip from sliding up and down the rail Grey and black color Made in the USA <
Install this handrail on your trailer's 4-step scissor steps for extra stability when entering and exiting your camper. Clamps to your steps and includes the bracket for mounting to your RV. ... Features: Attaches to your camper's scissor steps so you can safely climb in and out of your trailer Works with Brophy and most other 4-step scissor steps Installs easily on your RV with included bracket Clamps to either side of your stairs Folds flat for convenient storage Constructed of lightweight aluminum for superior rust resistance Made in the USA Specs: Hand rail length: 49" Hand rail post length: 43"
A folding, collapsible hand rail designed for your trailer's scissor steps. Perfect length for the 5 step variety.Features: Add extra support when using stairs Easy to remove Clamps to existing stair and includes RV mounting bracket Folds flat for convenient storage Specs: Fits Brophy and most other 5-step scissor steps Hand rail length: 57" Hand rail post length: 43"
A folding, collapsible hand rail designed for your trailer's scissor steps. Perfect length for the 3 step variety.Features: Add extra support when using stairs Easy to remove Clamps to existing stair and includes RV mounting bracket Folds flat for convenient storage Specs: Fits Brophy and most other 3-step scissor steps
These aluminum steps attach to the door frame on RVs that do not have a step well installation point. 4-Step design extends to 5 steps with pull-out booster step. ... Features: Pull-out steps make it easy to get into or out of your trailer or RV Designed specifically for vehicles that do not have a step well underneath the entryway Scissor design lets you manually collapse steps and fold them up for travel Booster step allows you to extend the steps from a 4-step design to a 5-step Lever releases booster step for extension Landing gear creates a stable connection from the bottom step to the ground Adjustable legs help to stabilize stairs on uneven terrain Large rectangular footplates provide level support and help prevent sinking into ground No assembly required - landing gear comes pre-installed on the bottom step Locking tab on side of step frame bracket slides into the doorframe to keep the steps from accidentally deploying Steps feature 15" of elevation adjustment 7-1/2" With the booster step; 7-1/2" with the landing gear Glow tape creates lighted step surface for safely climbing into and out of your camper at night Adheres to sides of step platforms Glows in the dark for up to 10 hours with only 5 minutes of light exposure Aircraft-grade aluminum and stainless steel construction is durable and rustproof Built-in SureGrip tread on step surface provides excellent footing Stainless steel hinges are bolted together for easy add on, removal, or replacement of individual steps Bushing bearings offer smooth action and are longer-lasting than standard riveted connections Installs on your RV's door frame, avoiding damage to floor or exterior Made in the USA Specs: Entry height: 34-7/8" to 42-3/8" Doorway width: 28" Drop/Rise: 7-1/2" Weight capacity: 325 lbs Lifetime limited warranty Will Torklift GlowStep Revolution Uprising Steps Work for You?
Tackle tall entryways with TorkLift's GlowStep Revolution RV steps. Stable on uneven ground, pet and joint friendly, and built from rustproof aluminum - it folds up under the door so you stay clean, safe, and mobile on every adventure.Enhanced Safety and Accessibility The 7-1/2" rise between steps and wide 30" treads make climbing in and out smoother for kids, pets, and folks with bad knees. Built-in glow strips help you see the steps in the dark, and the Booster Step adds height flexibility with a flip of a lever.
These aluminum steps attach to the door frame on RVs that do not have a step well installation point. 4-Step design extends to 5 steps with pull-out booster step. ... Features: Pull-out steps make it easy to get into or out of your trailer or RV Designed specifically for vehicles that do not have a step well underneath the entryway Scissor design lets you manually collapse steps and fold them up for travel Booster step allows you to extend the steps from a 4-step design to a 5-step Lever releases booster step for extension Landing gear creates a stable connection from the bottom step to the ground Adjustable legs help to stabilize stairs on uneven terrain Large rectangular footplates provide level support and help prevent sinking into ground No assembly required - landing gear comes pre-installed on the bottom step Locking tab on side of step frame bracket slides into the doorframe to keep the steps from accidentally deploying Steps feature 15" of elevation adjustment 7-1/2" With the booster step; 7-1/2" with the landing gear Glow tape creates lighted step surface for safely climbing into and out of your camper at night Adheres to sides of step platforms Glows in the dark for up to 10 hours with only 5 minutes of light exposure Aircraft-grade aluminum and stainless steel construction is durable and rustproof Built-in SureGrip tread on step surface provides excellent footing Stainless steel hinges are bolted together for easy add on, removal, or replacement of individual steps Bushing bearings offer smooth action and are longer-lasting than standard riveted connections Installs on your RV's door frame, avoiding damage to floor or exterior Made in the USA Specs: Entry height: 34-7/8" to 42-3/8" Doorway width: 26" Drop/Rise: 7-1/2" Step dimensions: 21" long x 8" wide Weight capacity: 325 lbs Lifetime limited warranty Will Torklift GlowStep Revolution Uprising Steps Work for You?
These aluminum steps attach to the door frame on RVs that do not have a step well installation point. 3-Step design extends to 4 steps with pull-out booster step. ... Features: Pull-out steps make it easy to get into or out of your trailer or RV Designed specifically for vehicles that do not have a step well underneath the entryway Scissor design lets you manually collapse steps and fold them up for travel Booster step allows you to extend the steps from a 3-step design to a 4-step Lever releases booster step for extension Landing gear creates a stable connection from the bottom step to the ground Adjustable legs help to stabilize stairs on uneven terrain Large rectangular footplates provide level support and help prevent sinking into ground No assembly required - landing gear comes pre-installed on the bottom step Locking tab on side of step frame bracket slides into the doorframe to keep the steps from accidentally deploying Steps feature 15" of elevation adjustment 7-1/2" With the booster step; 7-1/2" with the landing gear Glow tape creates lighted step surface for safely climbing into and out of your camper at night Adheres to sides of step platforms Glows in the dark for up to 10 hours with only 5 minutes of light exposure Aircraft-grade aluminum and stainless steel construction is durable and rustproof Built-in SureGrip tread on step surface provides excellent footing Stainless steel hinges are bolted together for easy add on, removal, or replacement of individual steps Bushing bearings offer smooth action and are longer-lasting than standard riveted connections Add a GlowGuide handrail (A7621) for extra safety and support Installs on your RV's door frame, avoiding damage to floor or exterior Made in the USA Specs: Entry height: 27-3/8" to 34-7/8" Doorway width: 24" Drop/Rise: 7-1/2" Weight capacity: Without GlowGuide handrail: 350 lbs With GlowGuide handrail: 375 lbs Lifetime limited warranty Will Torklift GlowStep Revolution Uprising Steps Work for You?
... Glow tape lights step surface.A full list of the available steps is below. The doorway threshold will be used as the "mounting point" to determine how many steps you will need. How Many Steps Do You Need?
Filters
