Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Jon, yes you sure can! And it's not too difficult either. If your vehicle already has a 4 way flat on the back, you can just install the #ETBC7 which converts it to a 7 way to be used with trailers that have electric brakes. Basically the 4…
view full answer...The way to ensure that a new hub will fit a spindle is to match up the bearing set used in the original and replacement hubs. This is best done by matching part numbers. The linked diagram shows the usual placement of bearing part numbers. If you…
view full answer...The Bright Way Solar Battery Charger #BRW54FR has a charge controller inside the black box on the wiring. This will prevent the charger from over charging. The light on the box will flash red when charging and will also switch to an orange and then…
view full answer...The factory brake controller connector on your 2021 Jeep Grand Cherokee is located under the dash behind the hood latch, as shown in the provided photo. Keep in mind, the connector will only be there if the vehicle has the factory tow package which…
view full answer...Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler #DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for…
view full answer...Hi Lindsey, the correct D washer for your setup is part #5-23, and you’re absolutely right to double check this since that washer is what keeps everything locked in place and your bearings properly adjusted. You do want to stick with a D washer for…
view full answer...Hey Josh, so we can help but we don't have any custom fit gooseneck hitches that fit your 1976 Ford F-250. Best option would be a universal style option like the Curt plate part #C65500 which would need to get welded to the top of the truck frame…
view full answer...Good news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears #TJD-12000-RODNUT in the #12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically,…
view full answer...The Thule Wingbar Evo crossbars like #TH711320 have channels on top of them that standard roof rack accessories that are designed for channel mounts. The track nut part #853-5715 that you referenced would fit in this top channel as well.
view full answer...Hey John, the replacement gear kit you'd need is the part #TJD-12000-RODNUT which I attached two pictures that have instructions and an install diagram.
view full answer...Hi Peter; you do not need a master controller to add the etrailer Solar Charging System #e39FV to your setup. The included controller will read the battery and send the correct voltage when you have shore power or power coming from your tow vehicle.
view full answer...I looked up the owners manual for the 2014 Ford F-150. On a 4x4 SuperCrew with the 3.5 liter EcoBoost, 145 inch wheelbase, and 3.55 rear end the gross combined weight rating will either by 13,400 pounds (for limited models) or 15,500 pounds. If you…
view full answer...