Features: Unslotted, hex-washer-head self-drilling screw Zinc coated for corrosion resistance Great for use on grounding wires with a 1/4" diameter ring terminal 1/4" -14 x 3/4" long threads
Quick-splice wire taps let you splice this 4-way flat trailer connector into your vehicle. Bonded wires are color coded to make installation a little easier.The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tappingscrew and a ring terminal (sold separately). Wiring Configuration Wire Color Wire Function Green Right turn and brake light Brown Tail lights and running lights White Ground Yellow Left turn and brake light Quick Tips: We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years: Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
Replaces the screw end adjuster clip for your Dexter 12-1/4" self-adjusting hydraulic brakes.Features: Replaces the screw end adjuster clip for your Dexter 12-1/4" self-adjusting hydraulic brakes Quantity: 1 replacement adjuster clip
Shelves, boxes, panels, and other mounted pieces do not have to stay fixed in one cargo layout. This connector plate screws to wood or metal, then uses a spring-loaded E-track fitting so the attached piece can be installed, removed, or repositioned.Move the Mounted Piece between Track Slots: Spring-loaded lever connects and disconnects from Snap-Loc or E-track. Mount with 1/4" Screws: Two holes accept wood screws or self-tappingscrews (sold separately). Secure up to 133 lbs WLL: Thick steel plate has a 400-lb break strength and zinc plating.
Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…
Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…
Blue Ox has an easy system for determining the weight capacity of your spring bars, whereas other companies may use measurements or printed capacity to assist. With Blue Ox, there is a 5 dimple system: No dimples means it is rated for up to 350 lbs…
If you're looking for wall storage, then the CargoSmart X-Track Trailer Shelf Bundle - Matte Black - Steel - 667 lbs - 5' Long #3481788-T would be the correct solution and it will give you the ability to hang some hooks; if you can locate the…
Since a 2x6 board is about 1-1/2 inches thick, I don't think using 1-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood #TFX150ACQ is going to provide sufficient contact with the trailer frame. For that reason I recommend…
The Kodiak Hydraulic Brake Line Kit part #18SI-BLKIT doesn't come with hardware for the liner holders. The reason for this is that the exact hardware you need will vary by application and preference. In most cases, self-tapping screws will be…
You will need a number of other items to install disc brakes on a trailer that does not have any braking system installed on it. The first thing you will need to do is determine the inner and outer bearing and seal part numbers on your trailer. You…
There is a replacement that I recommend for the Tie Down 70E disc brake actuator, though you will want to verify that your mounting bolt holes are 3 inches apart on center and your tongue is a 3 inch channel. If they are I recommend the Dexter DX7.5…
I found your order and see that you arleady purchased: Draw-Tite trailer hitch receiver #75579 Trailer Wiring Harness #HM11141995 Adapter #37185 Brackets #18138 and #18140 All of which will work on your 2018 Grand Caravan and sounds like exactly what…
Hey Justin, The Replacement Mounting Bracket for Kodiak Disc Brake Caliper #KCMB10HRD is just the bracket with no hardware. You would need four each of the following hardware components in order to mount this bracket to the brake flange: Bolt #7-75…
You are correct that is a 3,500 lb axle. If you want a bearing kit the #BK2-100 you looked at is the right one. This comes with a #L44649 outer and #L68149 inner bearing along with a #58846 (10-19) grease seal. If you want a replacement idler hub you…
Easily mount this 4-way flat trailer connector to your vehicle's hitch or bumper with the included bracket. Quick-splice wire taps let you splice harness into your vehicle's wiring. Bonded wires are color coded for easier installation.To make this connection, you'll need a ring terminal (sold separately) and the the included self-tappingscrew. Wiring Configuration Wire Color Wire Function Green Right turn and brake light Brown Tail lights and running lights White Ground Yellow Left turn and brake light Easily Mount Connector with Included Bracket The included mounting bracket can be installed on your hitch or attached to another bracket (sold separately) that mounts under your bumper with the included hardware.
... Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. Includes wire taps.Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Installs with kit 55151 (sold separately) to help run wiring to vehicle battery Color-coded wires ease installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tappingscrew Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
... Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. Includes wire taps.Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Includes powered converter wiring kit for complete installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Power wire: 20' Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tappingscrew Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
5' E track rail lets you create anchor points on the wall or floor of your trailer or in your workshop. Multiple slots accommodate straps, tie-down anchors, hooks, and other E track accessories. 6,000 lbs Max load.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
94" Long. This set of E tracks lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
60" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
48" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
94" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
94" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
36" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
36" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
60" long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
60" Long. This handy E track lets you create anchor points for securing cargo in your vehicle, trailer, or garage. Accommodates E track accessories (sold separately) that let you secure vehicles, hang cables, store tools, and so much more.Please note that E Track is only as strong as the wall you are mounting it on. For best results, make sure the track is level, use self-tapping or wood screws (not included), and fasten directly into the studs. Available Backing Plates for Additional Support For a more secure fit, you can add backing plates to your E Track.
Upgrade a heavy work or livestock trailer from manual cranking with a self-contained 10,000-lb hydraulic jack. The Vaquero carries its own power unit, gives you 26" of lift, and includes a manual override for backup operation.Highlights Hydraulic Power Without an External Pump: Self-contained power unit gives you powered lifting without tying into another hydraulic system. 10,000-lb Capacity and 26" Lift: Built for heavy work, livestock, and equipment trailers that see regular hitching and unhitching.
Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.Specs: Quantity 1 Gauge: 10-12 Maximum power rating: 600 volts Color: yellow Additional tools needed: pliers Features: Closed port quick splices self-stripping connector Designed to splice into an existing wire without having to cut, crimp or strip Blade attached to pierce the wires in each of the channels of the connector Provides an open channel for existing wire and a closed channel for tap wire Pliers needed to squeeze down on the blade after wires are placed
Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.Features: Closed port quick splices self-stripping connector Designed to splice into an existing wire without having to cut, crimp or strip Blade attached to pierce the wires in each of the channels of the connector Provides an open channel for existing wire and a closed channel for tap wire Comparable to the 3M red quick splice Pliers needed to squeeze down on the blade after wires are placed Specs: Quantity 1 Gauge: 18-22 Maximum power rating: 600 volts Color: red Additional tools needed: pliers
Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.Features: Closed port quick splices self-stripping connector Designed to splice into an existing wire without having to cut, crimp or strip Blade attached to pierce the wires in each of the channels of the connector Provides an open channel for existing wire and a closed channel for tap wire Comparable to the 3M blue quick splice Pliers needed to squeeze down on the blade after wires are placed Specs: Quantity 1 Gauge: 18-16-14 Maximum power rating: 600 volts Color: blue Additional tools needed: pliers
Filters
