Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets you easily plug in your electric brake controller.Features: Towing prep kit replaces damaged factory 7-way, blade-style trailer connector at the back of your vehicle Enables your truck to power your trailer's signal lights Compatible with 4-pole, 5-pole, and 6-pole adapters (sold separately) T-One connects quickly and easily Plug into connection points beneath vehicle Run body harness up to car battery Included tail light converter ensures that your vehicle's wiring matches that of your trailer Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port near the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Maximum amperage: Stop/turn lights: 4.2 amps per circuit Running/tail lights: 12 amps per circuit 1-Year limited warranty Installation of Tekonsha T-One Connector This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located at the rear of your vehicle.
Replace the damaged 7-way, RV-style trailer connector on your vehicle with this T-One harness. ModuLite reduces strain on wiring system. Brake controller adapter plugs in beneath your dash and lets you easily plug in your electric brake controller.Features: Towing prep kit replaces damaged factory 7-way, blade-style trailer connector at the back of your vehicle Enables your truck to power your trailer's signal lights Compatible with 4-pole, 5-pole, and 6-pole adapters (sold separately) T-One connects quickly and easily Plug into connection points behind tail lights Run body harness up to car battery Included tail light converter ensures that your vehicle's wiring matches that of your trailer Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Maximum amperage: Stop/turn lights: 4.2 amps per circuit Tail lights: 12 amps per circuit 1-Year limited warranty Installation of Tekonsha T-One Connector This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Adapter is wired for: 1995-2009 Dodge Ram 1500/2500/3500, Full Size, all models 1997-2011 Dodge Dakota Pickup w/Factory Tow Package 1998-2009 Dodge Durango w/Factory Tow Package 2007-2009 Chrysler Aspen w/Factory Tow Package Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into the built-in harness in your cargo area and then route it up to your dash so you can plug in your brake controller.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Specs: Length: 19-1/2' Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the connector beneath your vehicle's dashboard.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tow Ready Brake Controller Adapter To install your electric brake controller you need to connect the wiring of the controller to your vehicle.
Great question, Joseph! If you want to stick with something similar to what you already have you would want to go with part #DMC74FR. Make sure to measure the space your original water heater is in just to make sure this water heater will fit. This…
Yes, you can flat tow a 2016 Kia Soul with a manual transmission. You will need a tow bar, base plate kit, wiring harness, supplemental braking system, brake line kit, and potentially a high low adapter. I have listed all of the parts you will need…
We actually have a backup camera that you can plug in line with the 7-Way trailer connector. Take a look at #HM50002. I have linked a video showing an installation for you. As you can see, it will just plug in line with the 7-Way and retain all the…
To keep your fifth wheel from hitting the bed rail sides or Ram Boxes you are going to get that clearance from where the pin box is mounted in the wing plates on the camper itself you can raise or lower it to achieve the clearance you need for those…
We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…
The Replacement Motor for Stromberg Carlson Electric Landing Gear Set part #LG-196308 should work in place of your Atwood 70079 Landing Gear Motor. I cannot confirm this as Atwood Landing Gear parts have been discontinued for some time so there is no…
The 10 degree up Torflex axle will have the center of the spindle sitting about 0.31" below the bottom of the frame of your trailer under no load. When it is under a full load it will sit about 1.45" above the bottom of the frame of your…
Thanks for reaching out! Yes, the Demco Air Force One #DM26VR will be a great option to keep your 2025 Ford Ranger brakes operational while in tow mode. This will work whether you have a brake booster or not. Page 19 of the Demco instructions goes…
Yes it will; Lippert has verified the correct replacement for your 175226/12656 control brain is indeed the following: - Replacement Lippert Leveling Control Brain for 4-Point Leveling System #LC53ED
The Optronics LED Clearance or Side Marker Trailer Light is available in Red #MCL0030RBB and Amber #MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your…
I went to our warehouse and measured the holes you mentioned you wanted the measurement for on the Lippert 1621 5th Wheel Pin Box, part #LC1387882. The holes measure 3/8 inch diameter. I have also attached a drawing of this pin box with the…
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter For most applications, the factory plug is located beneath the dash, near the center console.
Tow Ready Replacement Plugin Harness for the Tekonsha P3, Voyager, Prodigy, and Primus Brake Controllers. Also works with Draw-Tite Intella-stop Xtreme, Intella-stop Ultra, Intella-stop Digital, and Activator III (5520) brake controllers.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.Features: Wiring adapter eases installation of your electric brake controller Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523) Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510) Limited 1-year warranty Installation of Tekonsha Brake Controller Adapter This adapter plugs into the connector beneath your vehicle's dashboard.
Wiring adapter lets you easily connect your Tekonsha electric brake controller (sold separately) to your existing Curt brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.
Filters
