Your lights are out and you don't know why. This smart 7-way plug connects to your factory USCAR socket, runs a 20-second light check, and shows faults in the app so you know what to fix before pulling out of the driveway.Run a Light Check Solo: 20-second automated light test starts as soon as you plug in the trailer. Secure, Weather-Resistant Design: Resin-encapsulated electronics and included cover protect against dust, water, and vibration.
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. Extends 6" in 47.2 seconds with 1,000 lbs of tongue weight.Features: Electric jack lets you raise and lower your A-frame trailer quickly and easily Power Swap auxiliary cord allows you to power the jack directly from the 7-way on your tow vehicle Cord can be stored under jack cover when not in use Integrated storage ring keeps safety chains off the ground when not in use 3 LEDs illuminate the area for simple nighttime setup Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation Crank-thru socket allows you to manually operate jack if needed Easy bolt-on installation - hardware included Heavy-gauge steel construction ensures durability and strength Black powder coat finish resists rust and corrosion Durable, textured housing prevents chips and cracks Specs: Bracket height: 10-3/4" Retracted 28-3/4" Extended Lift: 18" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 47.2 seconds Retracts 6" in 43.5 seconds Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Power consumption: 30 amps Lift capacity: 3,500 lbs 1-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the rear threshold, storage covers, and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the rear threshold, storage covers, and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the rear threshold, floor covers, and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.You will have to remove the floor covers, some internal paneling, and the tail light assemblies to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery.
Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…
If all of the lights on the circuit are the exact same like with the #CE36ZR you can wire them in series but if there's any different fixtures on the circuit the lights would need to be wired in parallel.
I went out to the warehouse and pulled Curt Class V Trailer Hitch #C15300 and took some measurements for you. From the front bolt hole to the rivet (center to center) is 1-5/16 inches. From the rivet to the rear bolt hole is 7-7/8 inches and the…
The Optronics 7-Way Trailer Harness Plug Protector #ACP7B has mounting hole spacing of 2-3/4" side to side and 1-1/4" up and down. This can be attached with screws, bolts or some people have even just zip tied it to their trailer tongue.
We have the Dexter Hub and Drum part #8-219-9UC3-A which is a 7k oil bath hub and drum. It would fit your current axle perfectly and allow you to convert it to oil bath.
While we don't have any custom fit hitch plates that fit your 2016 International 4300 we do have some universal mounts that would potentially work. You'd need to have a qualified welder install the kit. The hitch plates below all come with…
While there isn't a 3D model available, I was able to verify with the manufacturer and get a small diagram of the mounting hole dimensions of the Buyers Products 10 Ton Pintle Hook #337PH10. The mounting holes are exactly 0.531" in diameter,…
The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…
Hi Jerry; an air compensated pintle hook like the Buyers Products 50 Ton Air Compensated Pintle Hook with Chamber and Plunger #337PH50AC is going to be the best option. However, none of our pintle hitch plates like the #3371809040 you looked at have…
Hey Jack, thanks for reaching out. What I recommend for you are the Ramp Springs #M376FR for left hand and #M366FR for right hand side. These are 2K rated springs designed for a 1-1/2" shaft. They are 10" long overall.
We do carry some nice heavy duty rubber plugs to protect the factory prep package on a Chevrolet Silverado. For this, you can use the Rubber Hole Cover part #RP30136 for the gooseneck hole and the Puck Plug Covers part #58199 for the pucks.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required.You will have to remove cargo trays, trim paneling, and interior covering to access this harness. Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area. It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
... This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.This brake controller is not compatible, but will not interfere, with Apple CarPlay or Android Auto. One-Step Installation The Curt Echo is unique for its plug-and-play installation. With no wiring or permanent installation, setting up the Echo is a breeze. The main unit plugs into the 7-way at the rear of your vehicle and then the 7-way trailer connector plugs into it.
... Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. 7-way RV-style plug makes setup easy.Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle switches on the front of the housing let you operate the jack On/off switch controls light Extend/retract switch controls up and down movement 7-way RV-style plug pulls power from your vehicle's trailer connector No need to manually wire for power 7-Way must have active 12 volt pin LED light illuminates at a downward angle to help you focus on your coupler Emergency crank (included) allows you to manually operate jack if needed Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Simple, bolt-on installation Specs: Bracket height: Retracted: 9" Extended: 28-1/2" Total lift: 25-1/8" Screw travel: 19-1/2" Drop leg travel: 5-5/8" Clearance: 20-1/2" From bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Hole spacing on drop leg: 1-7/8" Footplate diameter: 5-1/2" Lift capacity: 3,500 lbs 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
This socket plugs into T-connector to provide a 7-pole trailer connector in the truck bed for use with fifth wheels. Connector plugs into OEM wiring harness to allow for a 7-pole connector in the truck bed.Features: 7-Pole, sealed socket, RV-style trailer connector with T-connector Plugs into OEM harness - no splicing Provides quick and easy installation of RV socket in truck bed High-impact nylon construction Resists corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents intrusion of moisture when closed Has drain slot and angled design for drainage Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Application: Chevy, Dodge, GMC, Ford and Nissan trucks Current rating: 30 amps Volt rating: 12 volts Length: 7-1/2 feet Recommended hole cutout for connector in bed: 2-1/8" 1-Year limited warranty
Designed to use with your Curt Echo In-Line brake controller for easier installation. One end of this no-splice wiring harness plugs into your vehicle's OEM socket. The other end plugs into your 7-way connector (sold separately).Features: Wiring extension provides 20" of extra length for easier positioning and installation of your Curt Echo In-Line brake controller Connects OEM USCAR socket to 7-way connector (not included) or the Echo In-Line harness Simple plug-and-play design eliminates the need for cutting or splicing Slit loom keeps wires contained and protected 1-Year limited warranty
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.The included pigtail harness splices into your vehicle's wiring beneath your dash to provide an easy-to-access plug for the brake controller. Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required: 20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications If you don't already have a 7-way plug at the back of your vehicle, take a look at our exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
This complete kit allows you to add a 7-pole, RV-style socket to your truck bed for use with a fifth wheel or gooseneck. Kit includes socket, an adapter that plugs directly into your OEM wiring harness and a T-Connector to integrate the system.Features: 7-pole, sealed socket RV-style socket with T-Connector and Dodge/Chrysler adapter plug Provides 7-pole connector in the truck bed Plugs into Dodge/Chrysler OEM harness - no splicing Provides quick and easy installation of RV socket in truck bed High-impact nylon construction Resists corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents intrusion of moisture when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Application: Dodge trucks with factory plug Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 10 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty 11-893, 11-933, and 11-932 Pollak 7-Way Socket with T-Connector and Adapter for Chrysler Trucks pulling Fifth Wheels or Goosenecks Replaces 20111 Similar to V30137
... Tongue-and-groove lens seal. Recessed mount with included grommet and 3-wire plug.Features: Combination trailer tail light serves 3 functions when properly mounted Stop light Tail light Turn signal light Tongue-and-groove lens seals light to protect electrical connections against water and dust Premium bulb rated for up to 15,000 hours Wedge-base socket prevents premature bulb failure Durable polycarbonate housing Red lens over incandescent bulb Compatible with 12V DC systems Recessed mount with included grommet 3-Wire plug makes trailer connections DOT compliant Made in the USA Specs: Dimensions: 4-1/4" diameter x 2-1/16" thick Bulb type: incandescent 1-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
Establish a secure connection between your trailer and semi or other tow vehicle with this heavy-duty, 7-pole RV blade-style socket and mounting bracket.Features: Heavy-duty, 7-pole, RV blade-style socket connects tow vehicle to trailer Zinc, die-cast housing for durability Maximum amperage: 35 Includes mounting bracket and hardware 12-704 Pollak RV 7-Blade Plug End Socket with Bracket
You switch between trailers and want less hassle. One connector at the vehicle keeps hookups quick so you can plug in and go without hunting for parts.Quick Hookups: Choose the plug you need without rewiring.
You have a 4 Flat on the tow vehicle and a trailer with 7 Blade. This plug-in adapter makes the connection without rewiring, and the protected lead keeps the run tidy.Highlights 4 Flat to 7 Blade: Adapts 4 Flat connectors to 7 Blade. Plug-In Setup: No rewiring required. Protected Lead: Convoluted tubing helps guard the wiring. Signal Ready: Supports brake, turn, taillight, and ground.
4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts with the built-in flange and has a weathertight connector.It needs a particular adapter (AL45PWTB - sold separately) to plug into a 3-plug pigtail and connect to your vehicle or trailer. Pick up a right-angle pigtail (A47PB - sold separately) or a straight pigtail (A45PB - sold separately) if you don't have one already.
Filters
