Step on the dual-pin foot lever on this heavy-duty jack to use the drop leg hands-free - makes up half the total travel. Best for gooseneck setups where you can step between the truck and trailer. ... Features: Easy-to-use foot lever faces the front - no more bending, squatting, or muddy knees Use the drop leg completely hands-free Drop leg extension makes up about half of the total travel Works best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Black powder coated finish on inner and outer tubes Footplate minimizes sinking in soft ground Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes footplate, handle, and connecting pin Specs: Lift capacity: 12,000 lbs Support capacity : 20,000 lbs Lift: 13-1/2" Drop leg adjustment: 13" Total adjustment: 26-1/2" Overall height (from bottom of foot to top of jack): Retracted: 29-1/2" Extended: 56" Outer tube width: 4-3/8" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 2-1/2" on center Jack screw diameter: 1-1/4" 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Weld-on, pipe-mount swivel jack pivots up for travel. Square design provides solid side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Belly band welded to the outer tube provides extra strength Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-1/2" Extended Lift: 15" Drop leg adjustment: 13-1/2" Total adjustment: 28-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Included weld-on pipe mount lets you pivot the jack up for travel and down for use. Retracted height is 14-1/2". Extended height is 29-7/8". The drop leg adds 13-1/2" of manual adjustment to 15-3/8" of lift.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-7/8" Extended Lift: 15-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 28-7/8" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 5-7/8" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 15-3/4" and an extended height of 31". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Pipe mount (included) is required for installation Specs: Bracket height (from bottom of foot to center of pipe mount): 15-3/4" Retracted 31" Extended Lift: 15-1/4" Clearance: 8-1/2" from center of pipe mount to top of jack Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Pipe mount pin hole diameter: 5/8" Handle radius: 8-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
This fixed-leg, swivel jack pivots up for travel and down for use. Square design provides superior side-load support. Jack has a retracted height of 14-7/8" and an extended height of 30-3/8". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation Specs: Bracket height (from bottom of foot to center of pipe mount): 14-7/8" Retracted 30-3/8" Extended Lift: 15-1/2" Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7" long x 4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
This 5,000-lb A-frame trailer jack provides 15" of lift for easier hitching and uncoupling. Ergonomic top-wind handle offers comfortable operation. Carbon steel construction is finished with corrosion-resistant black powder coat and zinc.Features: 5,000-lb lift capacity supports utility, cargo, RV, and equipment trailers 15" lift makes hitching and uncoupling easier by raising and lowering your trailer Ergonomic top-wind handle provides comfortable manual operation Bolt-on design fits standard A-frame trailer couplers Black powder coat and zinc finishes help resist corrosion for long-lasting durability Carbon steel construction provides strength for demanding towing applications Includes support foot for stable positioning on a variety of surfaces Specs: Lift capacity: 5,000 lbs Lift: 15" Mount type: A-frame Operation: topwind manual crank Installation: bolt-on Outer tube diameter: 2-1/4" Material: carbon steel Finish: black powder coat and zinc Foot: included Warranty: 1-year
Hi Michael! Do you already have a 7-way on your Transit? If you don't have wiring, you need to start by adding a 4-way with #C56327 (single rear wheel) or #C42MJ (dually). Once you have your 4-way installed you can upgrade it to a 7-way using the…
Hey Aaron, it sounds like you are looking for an awning rail, is that correct? For that we have the P and F awning rail part #PF88FR which is compatible with the Solera awnings.
Great questions I am glad you asked them. I have solutions for them. You will need the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System #SM99209 and the Demco SBS Air Force One Coiled Air Jumper Kit for 2019 to Present…
The Replacement O-Ring for Dexter Axle 10K and 12K Disc Brakes part #010-062-00 install on the brake caliper guide bolts between the brake pads as shown in the photo below.
Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…
Hey Craig, thanks for reaching out! I believe the Optronics Fleet LED Trailer Tail Lights w/ Grommets #TLL12RK will work as replacements for your 2008 Featherlite 4926 trailer, but you'll need to confirm this on your end. These lights carry the…
Hey Lexie, the closest thing we have is the #BA65FR. This fits cutouts that are 5-1/4" wide x 4-1/2" tall. The little bit of extra height on your cutout won't be a problem since the face is 5-1/2" tall and would cover the opening.…
We have a wide range of trailer hubs so we can get you all set. Our hubs include bearings, races and seals. The way to select a replacement hub is to match up the bearings to the original hub. A new hub must use the same bearings as the old one in…
We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…
John, that is a completely valid concern, especially since you already went through the trouble of switching from the horizontal air distribution box to the lateral version just to improve airflow throughout your R Pod. The last thing you want is to…
Hey there Jeffrey! I would look at the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch #DM13205-95. This matches your specs of the 2-5/16" ball, zinc finish for marine applications or just better corrosion resistance, and it has…
There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…
Dutton-Lainson pull pin easy swivel industrial top winding jack.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Dutton-Lainson pull pin swivel side wind trailer jack with foot. Matte black finish.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
This 2,000-lb A-frame trailer jack provides 15" of lift for easier hitching and uncoupling. Its ergonomic top-wind handle offers comfortable operation, and the included foot provides stable support on a variety of surfaces.Features: 2,000-lb lift capacity supports utility, cargo, and recreational trailers 15" lift makes hitching and uncoupling easier by raising and lowering your trailer Ergonomic top-wind handle provides comfortable manual operation Bolt-on design fits standard A-frame trailer couplers Black powder coat and zinc finishes help resist corrosion for long-lasting durability Carbon steel construction provides strength for everyday towing applications Includes support foot for stable positioning on a variety of surfaces Specs: Lift capacity: 2,000 lbs Lift: 15" Mount type: A-frame Operation: topwind manual crank Installation: bolt-on Material: carbon steel Finish: black powder coat and zinc Foot: included
This Dutton-Lainson industrial topwind jack is a pipe mounted, swivel style jack with a base foot. 15" Lift with 2,000 lbs capacity.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
This Dutton-Lainson industrial topwind jack is a pipe mounted, swivel style jack with a base foot. 10" Lift with 2,000 lbs capacity.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
This Dutton-Lainson industrial sidewind jack is a pipe mounted, swivel style jack with a base foot. 11" Lift with 2,000 lbs capacity.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
This Dutton-Lainson industrial jack is top wind with a 2,000 lb capacity.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
This Dutton-Lainson industrial sidewind jack is a pipe mounted, swivel style jack with a base foot. 15" Lift with 2,000 lbs capacity.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Dutton-Lainson pull pin, easy swivel side wind trailer jack with foot.In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability. Fits 11-1/2" and 12" round jackfoot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability Made in the USA Specs: Application: 11-1/2" or 12" round jackfoot Diameter: 13-3/4" Weight: 8.4 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability. Fits 9" round jackfoot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability Made in the USA Specs: Application: 9" round jackfoot Diameter: 11" Weight: 5 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability. Fits 10" octagonal or round concave jackfoot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability Made in the USA Specs: Application: 10" octagonal or round concave jackfoot Diameter: 13-1/4" Weight: 8.9 lbs 2-Year limited warranty
Increase the surface area of your camper's leveling jackfoot to help prevent sinking and to get added stability. Durable rubber pad easily and permanently snaps into place.Features: Heavy-duty rubber pad snaps onto the foot of your camper jack for extra stability Prevents sinking into soft ground Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal foot from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Helps dampen vibration from inside camper that could cause shifting Built-in drains release moisture to prevent jackfoot from corroding Simple, one-time installation Line up the pad beneath your jack's foot and lower the foot until the lip on the pad fully engages and locks in place Made in the USA Specs: Application: 6" round jackfoot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability. Fits 7" square jackfoot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability Made in the USA Specs: Application: 7" square jackfoot Diameter: 9" Weight: 3 lbs 2-Year limited warranty
Perfect for fifth wheels and motorhomes with Quadra BigFoot leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds stability on soft ground. Includes (4) pads.Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned. Lower the jack until the lip of the pad fully engages around its foot and locks into place.
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability. Fits 10" round jackfoot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability Made in the USA Specs: Application: 10" round jackfoot Diameter: 11-3/4" Weight: 5.6 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability. Fits 8" round jackfoot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jackfoot to help prevent sinking and provides added stability Made in the USA Specs: Application: 8" round jackfoot Diameter: 10" Weight: 3.8 lbs 2-Year limited warranty
Replaces the jackfoot for your Dutton-Lainson 5,000 lb trailer jacks. Fits models 6670, 6670B, 6671, 6671B, and 3670B. Includes quick-attach pin. Resists rust and corrosion with zinc-plated finish.Features: Replaces the jackfoot for your Dutton-Lainson 5,000 lb trailer jacks Fits models 6670, 6670B, 6671, 6671B, and 3670B Includes quick-attach pin Resists rust and corrosion with zinc-plated finish Foot dimensions: 4" wide x 7" long
Filters
