Features: Replacement hardware kit for Curt, Da'Lan, Draw-Tite, etrailer, Hidden Hitch or Reese trailer hitch receivers Replaces damaged or lost hardware when installing your trailer hitch Please specify model number and hitch manufacturer when ordering
Replaces the mounting hardware for your Searsbox cargo box (SP-20SV).Features: Replacement hardware for your Searsbox cargo box (SP-20SV) Includes hardware to mount all 4 corners of your cargo box to your roof rack crossbars
Replaces lost or damaged mounting hardware for Thule Adventurer, Cascade, Excursion, Frontier, or Mountaineer roof-rack cargo boxes. Will not fit ES models.Features: Replaces lost or damaged mounting hardware for Thule Adventurer, Cascade, Excursion, Frontier, or Mountaineer roof-rack cargo box Will not fit ES models Includes complete set of mounting hardware for 1 cargo box 4 Sets of Quick-Mount brackets 8 Foam pads (for protecting your crossbars from the brackets) 8 Standard length bolts (for normal size crossbars) 8 Lock washers 8 Hand knobs 15 Round stickers (for covering mounting holes in the box) 2 Tie-down straps (for securing cargo) Specs: Application: Thule Adventurer, Cascade (667), Excursion (TH667), Frontier (TH668) or Mountaineer (TH669) roof-mounted cargo box Bolt dimensions: 3" Overall length 2-3/4" Thread length
Replaces the hardware needed to install the base rails of your sliding ladder rack on a short-bed truck. Works with TA21501 rails for SR ladder racks and TA21500 rails for G2 ladder racks. ... Features: Replaces the hardware needed to install the base rails of a TracRac SR or TracRac G2 sliding ladder rack on your short-bed truck Works with TracRac models: TA21500 and TA21501 base rails TA21500-02, TA21501-01, TA21501-02, TA21501-03, TA21500-02-02, TA21501-01-01, TA21501-02-02, and TA21501-03-02 ladder racks Includes: 4 Steel pocket nuts (8) 3/8" Long safety bolts (4) 3" Long socket-head cap screws 24 Plastic access plugs 4 Nylon washers Rubber expansion blocks (TARB-11032-1) that fit into truck bed stake pockets are sold separately
Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts.
Hey John. To replace the hardware on the Curt Trailer Hitch item #14055, you'll need the Replacement Hardware Kit for Trailer Hitches item #RHK. You will want to go to the item #RHK product page and on the right side you'll put 14055 where it…
The hardware size to use with the Buyers Products Lunette Ring part #337BDB125015W is 5/8 inch in size so if you went with a Grade 5 bolt it would need to be 170 ft lbs or 240 if Grade 8. In reality it's about what the hardware calls for and…
Yes we do have replacement hardware kits for this Curt #13408 hitch. You will want to go to the product page of Replacement Hardware Kit for Trailer Hitches #RHK and enter in your hitch item number, for examle, #13408. Then select the hitch…
The trailer hitch part #13408 comes with install bolts that are 7/16-14 x 1 3/4 and M12 - 1.75 x 50mm. These are Grade 5. If you were in need or replacement hardware you can order it from us with part #RHK.
In order to replace the mounting hardware for your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #13408 you'll want the Replacement Hitch Hardware Kit #RHK. When you go to the page for the #RHK there is a field marked…
EZ Loader trailers have different sizes and configurations which come with different types of bearings so I can not tell you exactly what your bearing sizes are. One of the easiest ways to find your bearing size is to take off one of your hubs and…
Wheel torque specs vary based on stud diameter, wheel diameter and wheel material. The linked chart shows you commonly recommended torque specs for a range of studs and wheels. For 1/2-inch wheel studs and a 14-inch steel trailer wheel you will use a…
First, on kit #80910-T, one end of the flexible hose attaches directly to the brake assembly. You will then route the other end to the steel brake line and use the metal piece with the flared ends to go from the flexible hose to the steel brake line.…
The brake caliper mounting bracket that comes with the Titan Premier Disc Brake Kit part #T2HRCM10DAC has a standard four bolt brake mounting flange pattern. This pattern is an industry standard so as long as you have the four hole pattern there will…
The Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized #AKIHUB-545-35-G-EZ-K does not come with the spindle nut. That would come with your axle. For a 3,500 lb axle you would want the Spindle Nut Kit for EZ Lube Axles…
Hello Jeff, thanks for reaching out, and thanks for providing all that info, it really helps. I looked up that Magic Tilt part number PG1090. It is a UFP model A-60 which is super common and we do have a good replacement for this. Take a look at the…
Replacement hardware kit includes everything you need to secure the head assembly on your Fastway e2 weight distribution system to your adjustable shank. ...
Replaces the hardware needed to install the base rails of your sliding ladder rack on up to an 8' long bed. Works with base rails for SR ladder racks for GM and Chevy trucks.Features: Replaces the hardware needed to install the base rails of a TracRac SR ladder rack on your truck Rubber shim kit (TA8527645001) is sold separately Works with TH43002XT-780 or TH43002XT-780EX ladder racks
Replacement head assembly works with Blue Ox standard SwayPro weight distribution systems. Includes replacement hardware.Features: Replacement weight-distribution head fits Blue Ox standard SwayPro weight distribution systems Mounting hardware and chrome hitch ball included Fits: Standard Blue Ox SwayPro weight distribution systems
Replaces the hardware necessary to attach your fairing to your Yakima LoadWarrior (Y07070 or Y07070-74) or SkinnyWarrior (Y07014 or Y07014-16) cargo basket.Features: Replaces the hardware necessary to attach your fairing to your Yakima LoadWarrior (Y07070 or Y07070-74) or SkinnyWarrior (Y07014 or Y07014-16) cargo basket Includes: 3 SNARs - SnapAround mounting brackets 3 Carriage bolts 3 Washers 3 TriLobe knobs Specs: Carriage bolt dimensions: Length: 2-1/4" Bolt head diameter: 1/4" Thread pitch: 20-TPI Fits: Yakima SkinnyWarrior roof rack cargo basket: Y07014 or Y07014-16 Yakima LoadWarrior cargo basket: Y07070 and Y07070-74
Replaces hardware from your Curt TruTrack weight distribution system with active sway control that is rated 5,000 lbs - 10,000 lbs. Includes washers and bolts for head, linch pins to secure spring bars in trunnions, and a hitch pin with clip.Features: Replaces the hardware for your 5,000 lbs - 10,000 lbs Curt TruTrack weight distribution system with sway control Includes: 2 Wire-lock linchpins 2 Head tilt washers (1) 3/4-10 x 5" Hex bolt (1) 3/4-10 x 4" Hex bolt (2) 3/4"-10 Nylock nuts (1) 5/8" Hitch pin with clip
Use this hardware kit to mount (2) 12-1/4" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers. For axles with 10,000 lbs to 15,000 lbs capacity.
Replaces the hardware needed to install the base rails of your sliding ladder rack on a long-bed truck. Works with TA21000 rails for SR ladder racks. Rubber expansion blocks (TARB-11032-1) sold separately.Features: Replaces the hardware needed to install the base rails of a TracRac SR ladder rack on your long-bed truck Works with TracRac models: TA21000 base rails TA21000-02, TA21000-03, TA21000-02-02, and TA21000-03-02 ladder racks Includes: 6 Steel pocket nuts (8) 3/8" Long safety bolts (6) 3" Long socket head cap screws 36 Plastic access plugs 6 Nylon washers Rubber expansion blocks (TARB-11032-1) that fit into truck bed stake pockets are sold separately
Replaces the mounting hardware for SportRack Explorer or SkyLine XL roof mounted cargo boxes. Includes everything necessary to mount 1 cargo box a roof rack.Features: Replaces the mounting hardware for SportRack roof mounted cargo boxes Fits SportRack Explorer (A9009) and SkyLine XL (SR7095) roof mounted cargo boxes Includes everything necessary to mount a SportRack Explorer or SkyLine XL cargo box to a roof rack
... Requires 2 sets of hardware for complete installation.Features: Replaces 1 set of mounting hardware that secures your Yakima Outdoorsman ladder rack to your truck Fits all Yakima Outdoorsman ladder racks (Y01137-Y00411, Y01137-Y00409, Y01136-Y00409, Y01136-Y00410, or Y01137-Y00410) Includes 2 J-bolts, 2 square plates, 2 washers, 2 nuts, and 2 caps Requires 2 sets of hardware for complete installation Fits: All Yakima Outdoorsman ladder racks: Y01137-Y00411, Y01137-Y00409, Y01136-Y00409, Y01136-Y00410, and Y01137-Y00410
Features: Replaces all mounting hardware for installing 1 set of Yakima roof-rack tracks Includes 14 PlusNuts, bolts and washers, and 2 PlusNut installation tools Specs: Application: Yakima 42" (Y01126) or 54" (Y01127) roof-rack tracks
Replaces the head adjustment hardware that came standard on your Curt weight distribution system with round bars. Includes 1 rivet and 7 spacers that let you adjust the alignment of the hitch head.Features: Replaces the head adjustment hardware on your Curt weight distribution system with round bars Allows you to adjust the spacing between the shank and the hitch head to ensure proper tilt for your setup Installs between the shank and the hitch head Resists corrosion with zinc finish Includes: (1) 1" Long rivet 7 Washers
This hardware allows you to mount an Inno cargo box or platform in the T-slots of Inno Aero crossbars. Bolts install in the top channels of your crossbars - replacing your existing clamps - to provide a clean, low-profile look.Features: Adapter kit lets you mount an Inno cargo box or platform in the T-slots of your Inno Aero crossbars Works with all Shadow and Wedge series boxes as well as Stream box (BRA766BK) Also works with Inno Roof Deck platform rack (INA510) T-bolts slide into crossbar top channels and secure inside box with plates and hand knobs Creates a flush, integrated look and a lower profile for more overhead clearance Kit includes 4 T-bolts, 4 plates, 4 washers, and 4 round knobs Replaces mounting hardware included with the box Limited lifetime warranty
Replaces the hardware bag for your Yakima OutPost HD or OverHaul HD truck rack. Fits all Yakima OutPost HD and OverHaul HD truck racks.Features: Replaces the hardware bag for your Yakima OutPost HD or OverHaul HD truck rack Fits all Yakima OutPost HD and OverHaul HD truck racks Includes: (8) M12 screws (8) M12 square washers (8) M8 screws (8) M8 lock washers (8) M8 flat washers 4 Bar nut plates Fits: All OutPost HD and OverHaul HD truck racks
Replaces the mounting hardware kit for your Thule TracRac TracONE ladder rack. Includes screws, bolts, and nuts needed to install your ladder rack.Features: Replaces the mounting hardware kit for your Thule TracRac TracONE ladder rack Fits Thule TracRac TracOne (27000XT or 27000XTB) ladder racks Includes: (16) 3/8"-16 x 1-1/2" Flat head cap screws (8) 3/8"-16 x 5/8" Button head cap screws (8) 3/8"-16 Square nuts (4) M6-1 Socket head cap screws (8) 3/8"-16 x 3" Button head cap screws (4) M8 x 26 mm T-bolts Fits: Thule TracRac TracONE ladder rack: 27000XT and 27000XTB
Filters
