If the 25K lift capacity of the TJD-25100 isn't enough, adding this follow leg will double it! Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Dropleg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speed jack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Dropleg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Dropleg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the dropleg adds the extra reach you need to dial in height before leveling.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy DropLeg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. Corrosion-Resistant Finish: E-coat and matte black powder coat help fight rust.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy DropLeg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Specs Capacity & Lift: Maximum capacity: 3,500 lbs Screw travel: 18" Additional dropleg travel: 9.75", adjustable in 2" increments Motor & Power: 12V electric motor 7-way plug connection Wire gauge: 14 AWG LED work light Construction & Dimensions: Trailer jack outer tube diameter: 2-1/4" Trailer jack finish: e-coat and matte black powder coat SnapPad diameter: 7-3/4" octagonal exterior with 6" round inset SnapPad overall height: 1-3/4" SnapPad material: heavy-duty, black rubber Included Accessories: Manual backup crank handle Mounting hardware included Integrated SnapPad for 6" jack foot Warranty: Limited Lifetime
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy DropLeg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the dropleg adds the extra reach you need to dial in height before leveling.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy DropLeg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. Corrosion-Resistant Finish: E-coat and black powder-coated steel help fight rust.
Hey Darcy, yes a round A-Frame trailer jack like the part #TJA-5000S-B like what you referenced would work in place of a square tube a-frame jack as the mounting brackets are the exact same. Did your old jack fail or get hard to crank?
Hey D, thank so for reaching out! The Square Drop Leg Stabilizer Jack #SJ-R208 measures 1-1/4" for the tubing on the leg, and it has 7/16" diameter pin holes for the height adjustment. Those holes are also spaced 1-3/16" apart on…
I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle #XLPROLUBE. It is a 90 weight synthetic oil. Dexter bought out Kodiak so this meets their specifications. I've also attached a photo of Dexter's recommended Oil…
The Dexter item #8327834-EB is the top of the line option and by far the best choice out of the two. The etrailer item #e83SR is our economically priced option for people who are on a budget or replacing an axle on an older trailer. The axles are…
We don't have a way to look it up but if that 4-way connector came with your 2018 Ford F-150 from the factory then you definitely have the brake controller port. It'll be located below your steering wheel behind the panel on the right. I have…
For your needs I recommend Bulldog jack #BD190708. It is rated higher at 5,000 pounds but all that means is that it will be easier on the jack. It fits all of the other criteria you are looking for. The fully retracted height is 12-5/8 inches and it…
You don't have to do an initial adjustment with self-adjusting trailer brake assemblies, and since it's challenging for the reasons you mentioned I don't recommend doing it and personally wouldn't if it was my trailer. Easiest…
It is possible to loosen up how tight your Self-Adjusting Electric Trailer Brake Kit #AKEBRK-35-SA but it is a little difficult to do, mainly due to lack or room for working. You can potentially remove your hub to make loosening the brake a bit…
Yes, there is Jason. We actually have two different options and which one you need is going to depend on whether or not your 2025 Kia Telluride has LED lights. I have listed both of them below: With LED Lights - Curt T-Connector Vehicle Wiring…
I have attached the diagram with all of the dimensions of the Pro Series Square Jack - Drop Leg w/ Spring Return #PS1400950376 you are looking for. The Pro Series #PS1400950376 has a 10000lb weight capacity, is a direct weld on design, and includes a…
Based on my research the Atwood jack 80274 was an A-frame type side-wind tongue jack with a 2K weight rating. The Pro Series jack #PSRV20000103 that you referenced is a suitable replacement for this discontinued product. The Pro Series offers a 2K…
For a hub bore of 1.97 inches going with a Bearing Buddy part #BB1968SS would be the closest match. The .02 inch difference would only mean the Bearing Buddy would fit slightly easier.
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy DropLeg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin.
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of dropleg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Dropleg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Dropleg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. ... Features: Stabilizing jacks help keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jacks up for travel, down for use Droplegs extend so you can adjust the height Spring-loaded levers release droplegs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Installation hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Dropleg travel: 6-1/2" Lift capacity per jack: 650 lbs Maximum load the jack can lift Support capacity per jack: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 2 jacks 1-Year warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Pull the front-facing plunger pin on this heavy-duty jack to release the dropleg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Dropleg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Dropleg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on dropleg: 3-3/8" from center of hole to center of hole 1-Year warranty
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of dropleg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Dropleg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Dropleg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Weld-on jack has a retracted height of 24-3/4" and an extended height of 40-1/8". Square design provides superior side-load support. The dropleg offers 13-1/2" of lift on top of the 15-3/8" screw travel. ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Dropleg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 24-3/4" Retracted 40-1/8" Extended Total lift: 28-7/8" Screw travel: 15-3/8" Dropleg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 6" wide Handle radius: 7-3/4" Adjustment hole spacing on dropleg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The dropleg offers 13-1/2" of lift on top of 15-1/4" of screw travel. ... On these jacks, you'll see the maximum extension of the dropleg listed in the specs as well. Adding the screw travel and dropleg travel together will give you the total lift.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The dropleg offers 13-1/2" of lift on top of 15-1/4" of screw travel. ... On these jacks, you'll see the maximum extension of the dropleg listed in the specs as well. Adding the screw travel and dropleg travel together will give you the total lift.
After a long drive, the last thing you want is to crank your trailer jack by hand. This electric jack does the heavy lifting with a push of the switch, and the dropleg and foot plate help you get level fast so you can settle in and relax.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy DropLeg Adjustment: Dropleg extends up to 4-1/2" for extra lift when you need it. Built to Last: E-coat and black powder coat help prevent rust and corrosion for the long haul.
... Dropleg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes sidewind handle.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Sidewind handle has zinc finish for attractive look and rust resistance Dropleg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube and zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of jack): 24-5/8" Retracted 39-7/8" Extended Total lift: 28-3/4" Screw travel: 15-1/4" Dropleg travel: 13-1/2" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 7-3/4" Adjustment hole spacing on dropleg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty
Drop-legjack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the dropleg, and pin in place. ... Features: Drop-leg stabilizing jack helps keep your lightweight trailer or camper level and steady Great for loading and unloading cargo or for camping Telescoping dropleg lets you adjust the height Once welded to the trailer, pull the pin to lower the dropleg and reinsert it to keep the leg in place Round footplate provides stability Sturdy steel construction Weld-on installation Specs: Height: 20" from bottom of footplate to top of jack Travel: 18" 1-3/16" From center of hole to center of hole Dropleg width: 1-1/4" Mounting bracket dimensions: 8" long x 1-1/2" wide Footplate diameter: 5-1/4" Lift capacity: 2,000 lbs 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Pull the side-facing plunger pin on this heavy-duty jack to release the dropleg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Dropleg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Dropleg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on dropleg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the dropleg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Dropleg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Dropleg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on dropleg: 3-3/8" from center of hole to center of hole 1-Year warranty
Included weld-on pipe mount lets you pivot jack up for travel and down for use. Retracted height is 14-1/2". Extended height is 29-7/8". Dropleg offers 13-1/2" of lift on top of 15-3/8" of screw travel.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Topwind handle has red claw grip for comfortable, easy cranking Easily folds away for storage Dropleg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-7/8" Extended Total lift: 28-7/8" Screw travel: 15-3/8 Dropleg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 5-7/8" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 9-1/4" Adjustment hole spacing on dropleg: 3-3/8" from center of hole to center of hole 1-Year warranty
Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. ... Features: Stabilizing jack helps keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jack up for travel, down for use Dropleg extends so you can adjust the height Spring-loaded lever releases dropleg for use Steel handle (SJ-100-HD - sold separately) lets you easily fine-tune height adjustment Large foot provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Mounting hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Dropleg travel: 6-1/2" Lift capacity: 650 lbs Maximum load the jack can lift Support capacity: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 1 jack 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
When youre hitching up, you don't want to crank forever or stack blocks to get the height right. The dropleg gets you close fast, and the side-wind handle keeps your hands clear so you're not banging your knuckles while you crank.Features to know about DropLeg Saves Time Every Hookup Instead of cranking the jack the full distance, the dropleg gets you most of the way there in one move.
Weld-on jack has a retracted height of 24" and an extended height of 39-1/2". The square design provides superior side-load support. Dropleg offers 13-3/4" of lift on top of 15-1/2" of screw travel. ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has claw grip for comfortable, easy cranking Easily folds away for storage Dropleg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black painted outer tube Zinc finished inner tube, footplate, and handle for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of handle mount): 24" Retracted 39-1/2" Extended Total lift: 29-1/4" Screw travel: 15-1/2" Dropleg travel: 13-3/4" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 9-5/8" Adjustment hole spacing on dropleg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" dropleg for extra lift. ... On these jacks, you'll see the maximum extension of the dropleg listed in the specs as well. Adding the screw travel and dropleg travel together will give you the total lift.
Filters
