Comparing TruRyde 10-36 Grease and Dexter 10-63 Oil Seal
Updated 09/25/2024 | Published 06/10/2021
Products Featured in This Question
Question:
Why does everyone try to match the Dexter 010-036-00 unitized seal which is the correct seal for 8K axles works with grease or oil lube with a double lip garter spring seal that is cheaper and clearly not as good ! This the correct part number for this axle per dexter and yes is between 40 - 50 apiece ! Why would anyone go cheap on a 30K trailer ? Unitized is the key ! Unbelieveable ! a 10.00 seal does not compare with the Dexter !!! Comment please !
asked by: Gary B
Expert Reply:
The TruRyde Grease Seal part # RG06-070 and Dexter Oil Seal part # 10-63 are both designed for the same size spindle as they have the same dimensions, 2.250" inner diameter and 3.376" outer diameter. That said, the TruRyde is a grease seal therefore designed to be used with grease lubricated hubs. The Dexter is an oil seal which is designed to be used with oil bath lubricated hubs although can be used with grease as well because of the tighter fit.
Product Page this Question was Asked From
Grease Seals 10-36 - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Trailer Bearings Races Seals Caps
- Seals
- EZ Lube Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- TruRyde
more information >
Continue Researching
- Search Results: barrel hinges
- Search Results: 205x8~10
- Search Results: 205/65~10
- Search Results: electric jack
- Search Results: trailer breakaway kit
- Search Results: 7k hanger kit
- Search Results: hanger kit
- Shop: Premium Trailer Breakaway Kit w/ Safety Cable, Charger, LED Tester, and 5 Ah Battery - Side Load
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 185-lb Capacity
- Shop: Square A-Frame Trailer Jack w/ Footplate - Drop Leg - Sidewind - 15-1/4" Lift - 3,000 lbs
- Shop: Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs
- Shop: etrailer Rust-Resistant 5-Leaf Double Eye Spring for 6K Trailer Axles - 25-1/4" Long - Dacromet
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 5,000 lbs
- Shop: Trailer Wiring
- Video: Shocker Hitch HD Air Ball Mounts | Manufacturer Interview
- Q&A: Troubleshooting Trailer Braking System With Brake Controller Indicating OL or Overload Error Code
- Q&A: Troubleshooting OL Code on Brake Controller
- Q&A: Gap Between Frame and Bracket on Curt Gooseneck Hitch for 2007 Chevy Silverado 2500 Short Bed
- Video: Let’s Check Out the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles
- Video: All You Need to Know About the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles
- Video: Grease Seals 10-36 (pair) Feature Review
- Video: Ultimate Overview of the Grease Seals 10-36 (pair)
- Q&A: Replacement Grease Seal for 2024 Grand Design Influence 2903RL
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Video: Hands-On with the Electric Trailer Brake Assembly
- Video: In-Depth Review of the Unitized Oil Seal for Trailer Hubs
- Q&A: Replacement Grease Seals for Dexter Part # 010-036-00 on a 7,000lb Trailer Axle
- Q&A: Grease Seal for Grand Design 5th Wheel with 7k Axles
Chuck T.
9/25/2024
I am replacing brake shoes earlier than expected because the Dexter seals #10-63 didn't quite keep the grease in. "can be used with" doesn't really answer the question. Which will hold contaminants out and grease in for the longest, TruRyde RG06-070 or Dexter 10-63?