Mount this 7-pole connector in your truck bed for quick, simple hookup of your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with existing factory wiring. Included aluminum mounting screws avoid galvanic corrosion in your aluminum bed.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
... Black plastic socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color-coded to RVI standards.Features: Standard, 7-pole, RV blade-style socket connects tow vehicle to trailer Black plastic construction Eliminates rusting Enhances appearance Prevents difficulty in plug removal Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded lid with stainless steel spring and rubber gasket Prevents leaks when closed Drain slot has angled design for drainage Secures trailer-end connector in socket Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License, and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge Distance between mounting holes center to center: 2-1/4" wide x 1-1/2" tall 1-Year limited warranty
Quick-splice wire taps let you splice this 4-way flat trailer connector into your vehicle. Bonded wires are color coded to make installation a little easier.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with included quick-splice connectors Bonded wires are color coded (see wire configuration below) Includes durable, molded-rubber, standard female output socket Specs: Harness length: 60" Max amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
... Metal socket has non-corroding, shock-resistant interior design that eliminates shorting out and is color coded to RVI standards.Features: Standard, 7-pole, RV-style socket connects tow vehicle to trailer Heavily plated metal construction Resistant to weather and corrosion Non-corroding, shock-resistant interior design Terminal reinforcer dams eliminate shorting out Prevent contact from spreading Center pins accepts up to 8-gauge wire Vinyl inserts keep out dirt and moisture Spring-loaded cover with stainless steel spring Safety latch Ensures connector is plugged into socket Color-coded to RVI standards Specs: Wiring configuration: Color - circuit - recommended wire gauge: White - Ground - 10 gauge Blue - Electric Brake - 12 gauge Green - Tail, License and Running Lights - 14 gauge Black - Battery Charge - 10 gauge Red - Stop and Left-Hand Turn Signal - 14 gauge Brown - Stop and Right-Hand Turn Signal - 14 gauge Yellow - Auxiliary Circuit - 14 gauge At its widest point, the diameter of the round portion 1-7/8" Mounting holes are 1-1/2" from center to center vertically and 2-3/16" from center to center horizontally 1-Year limited warranty 12-703 Pollak Metal 7-Pole, RV-Style Trailer Socket - Vehicle End Replaces 30310
... Quick-splice wire taps let you splice harness into your vehicle's wiring. Bonded wires are color coded for easier installation.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring with the included quick-splice connectors Bonded wires are color coded (see wire configuration below) Attaches to your hitch with included mounting bracket and hardware Includes durable, molded-molded, standard female output socket Specs: Harness length: 60" Bracket dimensions: 1-3/4" tall x 2-3/4" long Bolt hole spacing: 1-3/4" center to center Maximum amperage: 7.5 amps per circuit Wire gauge: 16 Limited 1-year warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
Hey Johnathon, welcome back! It is normal for the PowerMax 11-Stage Smart Trickle Charger item #PM49VR to get warm during charging. Especially during the initial bulk charging stage when it works hardest to recharge a drained battery. You should…
ey Travis, I confirmed your axle information through Dexter to find the correct replacement parts. The hub and drum for your 4,400lb Dexter axle is #8-407-5UC3-EZ. Included are bearings, races, grease seal, grease cap, lug nuts, cotter pin, castle…
Hey Rick, sorry about the confusion but the etrailer hitch part #e98848 that you referenced fits both the hybrid and non-hybrid versions of the 2025 Honda CR-V including your Sport model. It is organized in our fitguide in a somewhat confusing way…
Hey Tim, thank you so much for the measurements! The next size up in a 25-1/4" leaf spring with four leafs is our Double-Eye Spring for 5,000 lbs Trailer Axles item #e44SR. This leaf spring has a 2,500 lbs capacity so it'll definitely give…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hi Robert; are you looking for a replacement 7-way or are you trying to add 5th wheel/gooseneck wiring? The Curt #C69CR you were looking at is designed to replace a 7-way at your rear bumper. If you are trying to add a 7-way to your truck bed for 5th…
Hey Kevin! The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2460-2580 will not change the ride height of your 2020 Grand Design Reflection. The only exception is if your existing suspension is really worn out, in which case it…
Hey Dustin. I installed the Enclosed Trailer Transition Plate item #M368FR on a trailer here when we first got them in and you're good! That plate is single solid piece of steel. It's got a heavy duty piano style hinge that has been riveted…
Hey, Kenneth! Thanks for taking the time to share your kind words with us! We truly are thankful to have Wild RV Life as a partner and watch them as they go on their journey! Has there been any videos that they have done that you enjoyed the most?…
Hi Paul! Since you said occasional towing, I am going to steer you away from the Timbren option. They can be pretty rough and you will definitely feel it when you are not towing. If you had a constant load, it would have been an option, but I…
Hey Alan - you can absolutely use the M3 plate at the door-to-floor gap. Many folks run one on the outside edge and another inside for a totally smooth roll-through. The steel plate #M368FR gives you extra strength if you’re using pallet jacks or…
If you already have the tools and hardware needed for installation, this no-frills, universal, splice-in, 4-way flat connector will get you towing in no time. Color-coded bonded wires have functions printed on them to make installation easier.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Works with 2-wire electrical systems Splices into your vehicle's wiring Bonded wires are color coded (see wiring configuration below) and labeled Wire connectors sold separately Includes durable, molded-rubber, standard female output socket Specs: Harness length: 48" Max amperage: 2.5 amps per circuit Wire gauge: 14 90-Day Warranty 4-Way Trailer Connector Installation Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use a tester (sold separately) to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector.
... Designed for vehicles that have amber turn signals and incandescent bulbs. Includes wire taps and color-coded wires.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Designed with safety in mind Guards against electrical shorts and mis-wire situations Connects directly to your vehicle's wiring with the included quick-splice connectors Bonded wires are color coded to ease installation Resists shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes a durable, molded-rubber, female output socket with protective dust cover Specs: Application: vehicles with 3-wire electrical systems and incandescent tail lights 4-Way harness length: 76" Ground wire length: 16" Splice-in wire length: Brown, red, yellow: 16" Green: 60" Max amperage: Turn lights and brake lights: 3 amps per circuit Tail lights: 5 amps per circuit 1-Year limited warranty Do I Need a Tail Light Converter?
This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.Features: Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mounting bracket High-impact nylon construction Resists corrosion 4' Long wiring harness Hard-wires into vehicle wiring system Has 1/2" convoluted tubing Forms weathertight seal on back of socket Keeps out moisture Prevents corrosion Includes color-coded, 7-wire leads that meet RVI standards Right-angle mounting bracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating Protects against rust and corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems Connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Installation To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions.
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts, mis-wire situations, and electrostatic discharge Splices into your vehicle's wiring with the included quick-splice connectors Color-coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket with protective dust cover Specs: Application: Vehicles with 2-wire or 3-wire electrical systems Trailers and vehicles with LED or incandescent lights 4-Way harness length: 58" Splice-in wire length: 17" Ground wire length: 17" Power wire length: 20' Maximum amperage: Turn lights and brake lights: 3 amps per circuit Tail lights: 3 amps per circuit Wire gauge: Power wire: 12 Limited 1-year warranty Do I Need A Tail Light Converter?
Get a head-start on wiring your towed car before you even get the installation started. This kit comes with butt connectors pre-installed and ready to splice into your wiring. Integrated block diodes protect your vehicle from electrical feedback.Features: Connects your RV's tail, brake, and turn signal lights to your towed car's tail lights Plugs into your motorhome with 4-way flat connector Splices quickly into car's electrical system with included butt connectors Color-coded wires with wiring guide makes installation easier Prevents feedback that can damage your vehicle's electrical components with integrated block diodes Includes 4-wire harness, 4-flat extension cable, mounting bracket, silicone sealant, zip-ties, and installation hardware 1-Year limited warranty Do I Need a Brake Light Relay?
These bright LEDs stick onto the back of your towed car and display turn and brake signals without tapping into the electrical system - which means no permanent modification to your car! Great for cars that won't work with traditional diodes.Features: LED light strips adhere to the rear of your car and display brake and turn signals No modification to your vehicle No risk of damage from electrical feedback Great for cars that are not compatible with traditional wiring diodes IP68 rating protects LED lights from moisture and dust Color-coded Y wiring harness reaches both sides of the car for easy installation Kit includes everything you need to wire your vehicle's tail lights for flat towing (2) 10" Long LED strips with 3M adhesive 2 Plug-and-play flip latch wiring connectors Wiring harness Zip ties and cable tie mount pads LED output: 152 lumens Made in the USA Limited lifetime warranty
Install a 4-way trailer connector on your vehicle with this wiring harness with tail light converter. Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. Includes wire taps.Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Installs with kit 55151 (sold separately) to help run wiring to vehicle battery Color-coded wires ease installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tapping screw Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts and mis-wire situations Splices into your vehicle's wiring with the included quick-splice connectors Color-coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket with protective dust cover Specs: Application: vehicles with 2-wire or 3-wire electrical systems 4-Way harness length: 60" Splice-in wire length: Brown, red, yellow: 18" Green: 36" Ground wire length: 18" Power wire length: 12' Maximum amperage: Turn lights and brake lights: 4.2 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Do I Need A Tail Light Converter?
5-Way trailer harness connects to your tow vehicle to control trailer light functions. Wishbone-style harness comes with 2 tail light wires split for simple wiring. Auxiliary wire signals trailer brakes to disengage when in reverse.Features: 5-Way trailer harness connects to your tow vehicle to control trailer light functions Ideal for marine trailers with hydraulic or surge brakes Wishbone-style harness comes with 2 tail light wires split for simple wiring Allows you to run wires separately down each side of the trailer to tail lights without needing a jumper wire Auxiliary wire (blue) connects to backup light circuit to disengage surge brakes when you are driving in reverse Hydraulic actuator must have electric lockout feature built-in to disengage the trailer brakes Color coded wires help with installation White - ground Brown - tail lights Yellow - driver side stop/turn Green - passenger side stop/turn Blue - auxiliary wire Specs: Wire harness length: 40' Ground wire length: 30" Auxiliary wire length: 5' Manufacturer Cross Reference Harness will work as an exact replacement for: Truck Lite # 002295
Tow safely and legally with this wiring converter. Ensures that the brake and turn signals from your motorhome with a combined lighting system appear correctly on your towed car with a separate lighting system. Made for incandescent tail lights.Features: Ensures the brake and turn signals on your towed vehicle match the signals on your RV Converts the 2-wire signal from your motorhome to a 3-wire signal for your towed car Pairs with your tail light diode kit (sold separately) to carry signals from RV to towed car Installs easily - includes color-coded wires with wiring diagram Does not require a heavy-duty flasher or direct battery connection Provides consistent, reliable performance with surface mount technology (SMT) Shines brightly while producing minimal heat Ensures reliable operation in rough road conditions Specs: Application: Tow vehicles with combined brake and turn signals Towed vehicles with separate brake and turn signals Incandescent tail lights only Max amperage: Tail light: 5 amps Brake light: 2.1 amps Turn signal: 2.1 amps 1-Year limited warranty Note: Cannot be installed backward for use with a 3-wire tow vehicle and a 2-wire towed.
Install a 4-way flat on your vehicle with this splice-in harness. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems. Requires wiring kit (C55152 - sold separately) to connect to battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Works with 2-wire, 3-wire, and pulse-width modulation (PWM) systems Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring with the included quick-splice connectors Requires Curt powered converter wiring kit (C55152 - sold separately) to connect to your battery Color-coded wires and wiring guide ease installation Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Powered Tail Light Converter with Surface-Mount Technology Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
5-Way trailer harness connects to your tow vehicle to control trailer light functions. Wishbone-style harness comes with 2 tail light wires split for simple wiring. Auxiliary wire signals trailer brakes to disengage when in reverse.Features: 5-Way trailer harness connects to your tow vehicle to control trailer light functions Ideal for marine trailers with hydraulic or surge brakes Wishbone-style harness comes with 2 tail light wires split for simple wiring Allows you to run wires separately down each side of the trailer to tail lights without needing a jumper wire Auxiliary wire (blue) connects to backup light circuit to disengage surge brakes when you are driving in reverse Hydraulic actuator must have electric lockout feature built-in to disengage the trailer brakes Color coded wires help with installation White - ground Brown - tail lights Yellow - driver side stop/turn Green - passenger side stop/turn Blue - auxiliary wire Specs: Wire harness length: 25' Wire gauge (all): 20 Ground wire length: 30" Auxiliary wire length: 5' Manufacturer Cross Reference Harness will work as an exact replacement for: Truck Lite # 002275
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately) Ensures that your vehicle's wiring matches that of your trailer Avoids overloading your vehicle's electrical system by connecting directly to your battery Power wire and fuse kit included Designed with safety in mind Guards against electrical shorts and mis-wire situations Splices into your vehicle's wiring with the included quick-splice connectors Color coded wires ease installation Resists damage from shock and vibration for superior operation on rough roads Circuit board is constructed using surface-mount technology (SMT), an improvement over through-hole construction Includes durable, molded-rubber, female output socket and protective dust cover Specs: Application: vehicles with 2-wire, 3-wire, or pulse-width modulation (PWM) electrical systems 4-Way harness length: 60" Splice-in wire length: Brown, yellow, red: 18" Green: 72" Ground wire: 18" Power wire length: 20' Maximum amperage: Turn lights and brake lights: 5 amps per circuit Tail lights and running lights: 7.5 amps per circuit Limited 1-year warranty Do I Need A Tail Light Converter?
Powered converter splices into your vehicle's turn signal wiring. SMT construction boosts water and vibration resistance. Works with 24-volt 2-wire, 3-wire, and PWM systems.Features: Tail light converter ensures that your vehicle's wiring matches that of your trailer Works with 24-volt 2-wire, 3-wire and pulse-width modulation (PWM) systems Splices into your vehicle's turn signal wiring Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Resists water and vibration thanks to potted enclosure Connects directly to your vehicle's wiring Color-coded wires and wiring guide ease installation Made in the USA Specs: Required voltage: 24 Maximum amperage: Stop/turn lights: 2.1 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Notes: Only designed for 24-volt negative ground systems.
Adapter converts your 7-pole plug on the vehicle to a 6-pole plug to fit your trailer's connector.Features: Adapter converts your 7-pole plug on the vehicle to a 6-pole plug to fit your trailer's connector Function-testing LEDs provide built-in troubleshooting Center pin is set-up as electric brake, but can easily be changed to work with trailers that have the center pin wired as the hot lead To change functions, remove screws and switch black and blue wires Includes dust cover Please note: Locate wires and pin location by function only. Color coding is not standard among all manufacturers. Wire Identification GD = Ground, white wire TM = Tail, brown wire LT = Left turn, yellow wire RT = Right turn, green wire AX = Battery, black wire EB = Electric brakes, blue wire
Wire your vehicle with this universal, splice-in wiring harness so that you can connect the trailer's wiring to your vehicle's during towing. Designed for use with 2-wire electrical systems.Features: Wire your vehicle with this universal, splice-in wiring harness so that you can connect the trailer's wiring to your vehicle's during towing Designed for use with 2-wire electrical systems 4-Pole flat vehicle-end connector plugs into the 4-way flat on your trailer Color-coded wires allow for simple hardwiring to existing trailer connections Specs: Harness length: 48" Wiring configuration White: ground wire Yellow: left turn/brake light Green: right turn/brake light Brown: tail lights 1-Year limited warranty
Filters
