Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey, Carl. There isn't one specific lock that would be for that coupler. I tried to find some sort of picture of even a drawing of the coupler to see what style would be best for it but I couldn't find anything out there. What I do know about…
view full answer...As long as the 5,000 pound capacity for the Curt Single Hook Safety Cables #C80151 meets or exceeds your trailer's weight then they will indeed meet any local requirements with regards to safety chains or cables when towing. These cables have a…
view full answer...Hey Scott! Your 2026 Ford Ranger may or may not have a brake controller port/plug, even with the tow package. There will be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the…
view full answer...The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…
view full answer...Hi Nick, what replacement parts are you looking for? If it is something like brakes and hubs we can identify them using the axle tag if it is still on your axle. If you don't have an axle tag you can either pull the existing hubs and check for…
view full answer...etrailer is from the US. We are right in the middle near St Louis MO in a town called Wentzville. But we sell products that are made all over. Some from US and some from other countries as well.
view full answer...The Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 #8-201-9UC3-EZ is made in the USA. I reached out to my contact at Dexter and the Races and Bearings that go into those assemblies are made in…
view full answer...Chrome plating will offer a bit more corrosion resistance than a paint or powder coat finish that can be chipped off. Chrome plating tends to be a bit more resistant to corrosion because of this. The part #C45295 that you referenced would be an…
view full answer...Hey Nick, the Trimax Trailer Wheel Chock and Lock #TMX75FR you're looking at will work with your 175/80r13 trailer tires. This lock has measures 6" wide when closed and 10 1/2" when opened all the way, so with your tires measuring…
view full answer...According to Dexter, the nut should be torqued to between 45-70 foot lbs. If you don't have a torque wrench close at hand, Tighten the bolts until the lock washer flattens, which will put you really close to the correct torque. We offer 4 nuts…
view full answer...There is not a "set in stone" torque spec for the brake flange bolts on the 10" backing plates like the Dexter #23-26 and #23-27. When we install these here at our shop in Missouri, we will go for 45-50 ft lbs.
view full answer...It sounds like you are looking for a hitch mounted pintle hook to use the lunette ring mounted on your military trailer. If that is the case then the Curt Pintle Hook part #C48004 is what I recommend. That said, there really isn't one that will…
view full answer...