This red lens replaces the lens for your 4" round Peterson flush mount tail light. Fits Peterson413 and 425 series lights.Features: Replaces the lens for your 4" round Peterson flush mount tail light Fits Peterson413 and 425 series lights (PM425-3 and 429800 - sold separately) Acrylic lens construction Lens diameter: 4-1/4"
This red lens replaces the lens for your 4" round Peterson flush mount tail lights. Built in reflex reflector. Fits Peterson413-3 and 425-3 series lights.Features: Replaces the lens for your 4" round Peterson flush mount tail light Fits Peterson413-3 and 425-3 series lights (PM425-3 - sold separately) Built-in reflector removes the need for a separate reflector Acrylic lens construction Lens diameter: 4-1/4"
Use integrated switch or wire to a light switch to turn this single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.Features: Single dome light is perfect underneath an RV kitchen cabinet or in an enclosed trailer Included energy-efficient, warm yellow LEDs last longer and burn brighter than incandescent bulbs Integrated toggle switch lets you turn the light on and off Can also be wired to an interior light switch Frosted plastic lens won't shatter if accidentally dropped like a glass lens would Textured pattern helps disperse bright light throughout your RV Durable, white ABS plastic construction Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included 2-Wire design - white for ground and black for power Dimmer switch (not included) can be hooked up to the light Specs: Overall dimensions: 7-1/4" long x 4-1/3" wide x 1-3/4" deep Voltage: 12V DC Power draw: less than 0.5 amps Number of LEDs: 9 Need extra light over your camper kitchen sink for when you do the dishes?
Replacement retainer ring ensures proper spacing and protects against vibrations when installating a 4" diameter round Peterson light. Fits Peterson413SFeatures: Galvanized steel retainer ring ensures proper spacing and protects against vibrations when installating a 4" diameter round Peterson light Fits Peterson413S light
5-3/8" Diameter round. Incandescent trailer light provides stop, turn, and tail signal. Shock-proof socket protects bulb against damage. Durable steel housing. Flush mount to trailer - hardware not included. 2-Wire design. (1) 2057 bulb.Features: Round incandescent trailer light serves 3 functions Stop, turn, and tail Shock-proof socket protects bulb against damage Incandescent 2057 bulb can be easily replaced Durable steel housing Red acrylic lens over bulb Compatible with 12V DC systems Flush mount to trailer with flange - hardware not included Requires cutout 2-Wire design includes power lead and ground wire Specs: Dimensions: 5-3/8" diameter x 1-9/16" thick Bulb type: 2057 Power draw at 12.8V: Stop/turn: 2.4 amps Tail: 0.49 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # TL4300R Truck Lite # 80334R Grote # 50232 Peterson # 413/425
5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong plug.Features: Red round trailer light serves 3 functions on trailers Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens over white LEDs Mounts on trailer with built-in flange - hardware not included Requires a 4-1/2" round hole for installation Accepts industry standard 3-prong plug (A45PB and A47PB - both sold separately) DOT compliant Specs: Dimensions: 5-1/2" diameter x 1-15/16" thick Distance between mounting holes (center on center): 4-1/4" Diodes: 10 Power draw at 12.8V: Stop/turn: 0.413 amps Tail: 0.0.26 amps LIfetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 44326R Grote # 53292 Peterson # M418R-2 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4-5/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately) and designed with a weathertight connector. Hardwires to your trailer with the included pigtail.
Extend your trailer wiring with this 60" 4-way flat harness, built with a molded, weather-resistant plug for durability. Color-coded 18-gauge wires make installation easy, while the polarized connection ensures a secure, proper fit.
This 15" x 6" trailer wheel has a 6 on 5-1/2 bolt pattern and a 4.13" pilot diameter. The rustproof aluminum wheel features a unique design with black detailing. Improved clamp force technology ensures that wheel stays in place.Features: Aluminum wheel is durable, lightweight, and rustproof Hi-Spec Series 06 design with black interior is unique and appealing Front and back of wheel are clear coated Improved clamp force (ICF) technology helps to keep wheel securely in place Bulletproof joint created between wheel and hub when properly installed Eliminate the need for constant retightening of lug nuts Center cap is included High-quality wheel meets DOT specifications Specs: Rim dimensions: 15" diameter x 6" wide Bolt pattern: 6 on 5-1/2" Wheel bolt size: 1/2"-20 Pilot diameter: 4.13" Load capacity: 2,830 lbs Offset: 0 Lifetime warranty against structural defects Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
You flip on this work light so you can see clearly in a dark shop or at the edge of a jobsite before sunrise, giving you steady light that helps you stay focused and finish the work without second guessing what you are looking at.
7-11/16" x 3-5/8" Oval. LED trailer tail light with 5 hardwired leads serves 4 main light functions. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with built-in flange. Accepts AMP connector.
14-1/4" x 1-3/16" x 1-1/16". Waterproof identification light bar with 3-LED lights is designed for trailers wider than 80". Durable stainless steel base. Surface mount - hardware not included. 1-Wire design.
4-3/4" x 4-1/2" Square. Incandescent trailer light kit provides all legal lighting and reflectors for trailers under 80". Includes combination tail lights and side markers. Stud mount with included hardware. 20' Harness. PC rated.
4-1/4" Round. Weatherproof, incandescent trailer tail light serves as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. Recessed mount with included grommet and 3-wire plug.
8-5/8" x 3-1/4" x 1-15/16". Compact LED trailer light illuminates your license plate. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included bracket. 2-Wire design.
5-3/8" x 1-13/16" Teardrop. Waterproof, incandescent trailer light serves as a clearance or side marker light. Built-in reflex reflector. Surface mount - hardware included. 1-Wire design. P2 Rated.
18" Long. Interior cove lighting strip illuminates a trailer's interior. Great White series features ultra bright white diodes. Molded seal resists dust, moisture, and vapor. Surface screw mount to trailer wall or ceiling. 2-Wire design.
6-1/2" x 2-1/4" Oval. Waterproof, incandescent trailer light functions as a stop, tail, and turn signal light. Recessed mount with grommet (sold separately). Accepts 3-prong plug.
3-3/4" Round. Incandescent trailer light serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.
3-3/4" x 2-1/4" Rectangle. Incandescent trailer light serves as a clearance or side marker light. Durable chrome-plated ABS housing. Flush mount to trailer with included screws. Twist-in socket with 2-wire design. P2 rated. (1) 194 bulb.
3-3/4" x 2-1/4" Rectangle. Incandescent trailer light serves as a clearance or side marker light. Durable chrome-plated ABS housing. Flush mount to trailer with included screws. Twist-in socket with 2-wire design. P2 rated. (1) 194 bulb.
3" x 1-1/16" x 5/8". Low profile utility light provides bright white light. Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included hardware. 2-Wire design.
Filters
