Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landinglegs.
Replaces your power landing gear follow leg and snap pin. Enjoy the power setup while you are out camping and know that your RV or fifth-wheel will be steady and secure.Features: Replaces your follow leg and snap pin for Lippert Components power landing gear Fits standard power landing gear Supports your 5th wheel to prevent unwanted movement Constructed of sturdy steel with a black powder coat finish Made in the USA Specs: Weight capacity: Manual crank: 4,000 lbs per leg Single motor: 2,500 lbs per leg Dual motor: 4,000 lbs per leg Overall height: 32" Width: 2-1/2" Outer tube height: 29-1/2" Distance between bracket stops: Outside to outside: 17-1/2" Inside to inside: 15-1/2" 1-Year limited warranty
Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This replacement lead landing gear drop leg and snap pin will get you back to camping and enjoying the great features of your power landing gear.
Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail.Features: Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear Mounts to the inside of the frame rail Easy to install Includes snap pin Specs: Length: Extended with drop leg: 68" Extended no drop leg: 52-1/4" Retracted: 32-3/4" Travel: 35-3/4" Drop leg length: 16"
Replaces the heavy duty control leg for your Lippert Control Ground Control 2.0 landing gear.Features: Replaces the driver leg for your Lippert Components Ground Control 2.0 landing gear Specs: Range: 32" Static rating: 8,000 lbs Dynamic rating: 4,000 lbs
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).Features: Replaces the follow jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-2 and LG-4 Can be used with most electric landing gear sets, including Atwood, Venture, and Lippert models Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Leg length: 33-1/2" Weight capacity: 4,000 lbs
Replaces the OEM lead leg for Keystone Montana fifth wheel landing gear.Features: Replaces the OEM lead leg for Keystone Montana fifth wheel landing gear Includes 1 replacement leg
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-1, LG-3, and LG-183708. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).Features: Replaces the follow jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708 Can be used with most landing gear sets, including Atwood, Venture, and Lippert models Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes drop leg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Overall dimensions: 32-3/4" tall x 2-1/2" wide Leg length: 29-1/2" Weight capacity: 4,000 lbs
Replaces the landing gear follow leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail. Standard length.Features: Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear Mounts to the inside of the frame rail Easy to install Includes snap pin Specs: Length: Extended with drop leg: 68" Extended no drop leg: 52-1/4" Retracted: 32-3/4" Travel: 35-3/4" Drop leg length: 16"
Replaces the short, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0.Features: Replaces the short, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0 Quantity: 1 short jack leg
Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear.Features: Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear Includes 1 replacement leg
Clamp these spring-loaded pins around your landing gear so that you can quickly and easily adjust the drop legs. Heavy-duty steel is zinc plated for corrosion resistance. Works with square jacks up to 2-1/4" wide.Features: Spring-loaded quick pins make adjusting the drop legs on your landing gear a snap Pull pin to release, let go to engage Simple installation - clamps around jack leg No more losing pins Sturdy steel is zinc plated for durability and corrosion resistance Specs: Application: landing gear with up to 2-1/4" wide legs Pin diameter: 3/8" Quantity: 2 pins Lifetime warranty
Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landinglegs.
Replaces the lead leg in your Stromberg Carlson landing gear set (LG-2 or LG-4). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).Features: Replaces the lead jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-2 and LG-4 Can be used with most landing gear sets, including Venture and Lippert models Provides a mounting point for the hand crank or motor (sold separately) Connects to the follow jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes drop leg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Leg length: 33-1/2" Weld stops: Outside to outside: 21-1/2" Inside to inside: 19-1/2" Weight capacity: 4,000 lbs for manual crank, 2500 lbs for single motor
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.Fortunately, the 17 inches of drop leg travel should help to reduce some of that time. How to Determine the Weight Capacity You Need in Landing Gear Landing gear stabilizes about 25% of your trailer's total weight when it's loaded with cargo.
Replaces the landing gear follow leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail. Standard length.Features: Replaces the landing gear follow leg assembly for your Lippert Components Venture 5th Wheel RV landing gear Mounts to the inside of the frame rail Easy to install Includes snap pin Specs: Extended length: 33-1/2" Retracted length: 21" Drop leg length: 17" Travel: 19-3/4" Distance between weld stops: Outside to outside: 21-1/2" Inside to inside: 19-1/2"
Replaces the extended, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0.Features: Replaces the extended, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0 Quantity: 1 extended jack leg
Automatically level and stabilize your fifth-wheel RV with this electronic leveling system. 4 Precise, motorized jacks can be operated by either the included touchpad. Hitch recognition memory function offers simple hookup.Use this system if there will be 20' or less between the center of the landing gear footpad and the center of the rear jack footpad. If your setup requires more than 20' between the jacks, use the 6-point Ground Control system (LC675817) instead.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landinglegs.
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landing gear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landing gear legs 1-Year warranty
If your RV is already prepped for the Ground Control 3.0 system, this kit has everything you will need to automatically level and stabilize it, without unneeded, duplicate components.Use this system if there will be 20' or more between the center of the landing gear footpad and the center of the rear jack footpad. If your setup requires less than 20' between the jacks, use the 4-point Ground Control system (LC358590) instead.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).For these legs to work, you'd need a set of landing gear strong enough to lift no less than 3,500 lbs. And, yes, it's okay to have some legs with a weight rating that is higher than your trailer's pin weight.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landinglegs.
Filters
