Insert this heavy-duty drophitchreceiver adapter into your 2" hitch to get up to an 11" rise or drop for high or low ground clearance. 2" Receiver lets you use a ball mount, pintle hook, or other hitch-mounted accessory.Features: Drophitchreceiver adapter provides a rise or drop to match the height of your application Move receiver up or down adjustable shank and secure at chosen height with included pins 2" Receiver lets you use a ball mount, pintle hook, or other hitch-mounted accessory Built-in anti-rattle bolts reduce vibration and noise Adjust with included wrench Heavy-duty steel construction is ideal for towing extra-heavy loads Corrosion-resistant black powder coat finish Meets SAE J684 towing safety regulations (4) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch locks sold separately Made in the USA Specs: Application: 2" x 2" trailer hitchreceivers Built-in receiver size: 2" x 2" Maximum drop: 11" Maximum rise: 11" Maximum gross towing weight capacity: 7,000 lbs Maximum tongue weight: 700 lbs Dimensions: 11-1/4" tall x 13-3/4" long x 3" wide Distance from rear of shank to angled brace: 5-3/4" Distance from rear of shank to center of hitch pin hole: 2-1/2" Height adjustment: 1-1/2" increments Weight: 15 lbs Limited lifetime warranty
Insert this heavy-duty drophitchreceiver adapter into your 2" hitch to get up to an 11" rise or drop for high or low ground clearance. 2" Receiver lets you use a ball mount, pintle hook, or other hitch-mounted accessory.Features: Drophitchreceiver adapter provides a rise or drop to match the height of your application Move receiver up or down adjustable shank and secure at chosen height with included pins 2" Receiver lets you use a ball mount, pintle hook, or other hitch-mounted accessory Built-in anti-rattle bolts reduce vibration and noise Adjust with included wrench Heavy-duty steel construction is ideal for towing extra-heavy loads Corrosion-resistant black powder coat finish Meets SAE J684 towing safety regulations (4) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch locks sold separately Made in the USA Specs: Application: 2" x 2" trailer hitchreceivers Built-in receiver size: 2" x 2" Maximum drop: 11" Maximum rise: 11" Maximum gross towing weight capacity: 7,000 lbs Maximum tongue weight: 700 lbs Dimensions: 11-1/4" tall x 13-3/4" long x 3" wide Distance from rear of shank to angled brace: 5-3/4" Distance from rear of shank to center of hitch pin hole: 2-1/2" Height adjustment: 1-1/2" increments Weight: 15 lbs Limited lifetime warranty
Insert this heavy-duty drophitchreceiver adapter into your 2" hitch to get up to an 4" rise or drop for high or low ground clearance.Features: Drophitchreceiver adapter provides a rise or drop to match the height of your application Shank slides into hitchreceiver Adjustable height allows your tow bar to be level when towing Slide receiver platform up or down shank and secure in place with included dual pins For flat towing use only Built-in anti-rattle bolts reduce vibration and noise Heavy-duty steel construction is ideal for towing heavy loads Corrosion-resistant black powder coat finish (3) 5/8" Hitch pins with clips included for securing adapter to shank as well as attaching accessories Hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitchreceivers Built-in receiver size: 2" x 2" Maximum drop: 4" Maximum rise: 4" Maximum gross towing weight capacity: 10,000 lbs Maximum tongue weight: 1,000 lbs Distance between center of hitch pin hole to center of hitch pin hole: 13-1/2" Distance from center of hitch pin hole to angled brace: 6" Weight: 25 lbs Limited lifetime warranty Note: For flat towing use only.
Insert this heavy-duty drophitchreceiver adapter into your 2" hitch to get up to an 8" rise or drop for high or low ground clearance.Features: Drophitchreceiver adapter provides a rise or drop to match the height of your application Shank slides into hitchreceiver Built-in anti-rattle bolts reduce vibration and noise Heavy-duty steel construction is ideal for towing heavy loads Corrosion-resistant black powder coat finish (3) 5/8" Hitch pins with clips included for securing accessories, adapter, and shank Hitch lock sold separately Made in the USA Specs: Application: 2" x 2" hitchreceivers Built-in receiver size: 2" x 2" Maximum drop: 8" Maximum rise: 8" Maximum gross towing weight capacity: 10,000 lbs Maximum tongue weight: 1,000 lbs Dimensions: 13-1/2" tall x 12-3/4" long x 4" wide Weight: 25 lbs 1-Year warranty Note: For flat-towing use only.
Add a bike carrier or cargo carrier with this dual hitchreceiver.Features: Allows you to use a hitch-mounted bike rack or cargo carrier while towing your vehicle Constructed of sturdy steel Resists rust and corrosion with durable powder coat finish Requires pin and clip or hitch lock (sold separately) Specs: Application: 2" x 2" trailer hitches Dual receivers have 2" x 2" openings Gross towing weight: 10,000 lbs Tongue weight: 400 lbs Dimensions: 14-3/4" Overall length Overall height: 7-1/2" 4-1/2" From center of bottom receiver pin hole to center of top receiver pin hole 10" From center of hitch pin hole to center of receiver pin holes 12" From center of receiver pin hole to back of shank 8-3/4" From back of receivers to end of shank 2" From center of hitch pin hole to back of shank Limited lifetime warranty Note: Not for use when towing a trailer.
... Receiver intended for accessories only. Hitch pin and clip sold separately.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitchreceiver Ball platform provides mounting point for hitch ball (sold separately) 2" Square receiver allows you to carry hitch accessories while you tow Perfect for a bike rack or cargo carrier Sturdy steel is black powder coated for corrosion resistance Uses ball with 1" shank diameter Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitchreceivers Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Drop: 2-1/4" from inside of hitch opening Use in drop position only Accessory receiver size: 2" x 2" Distance from center of hitch pin hole to center of ball hole: 12-1/2" Overall length: 16-1/2" 90-Day warranty Notes: The receiver portion of this unit is designed for hitch-mounted accessories only.
Yes, they are John. The Titan Chain Heavy Duty Tire Chains w Cams item #TC74FR can be used both off road and on road. These chains will work with both the 275/70-18 and 285/60-20 tire sizes that come on the 2025 Ram 2500. Amongst quite a few others.…
The Roadmaster Tow Defender Protective Screening #RM-4750 and Blue Ox KarGard Towed Vehicle Protector #BX8870 both mount to the shoulder bolt of the tow bar baseplate connection so you could technically get both to fit together, but would have to…
There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…
The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, #HM56200 is confirmed to fit the 2015 Jeep Wrangler Unlimited and yes, this lets you wire your Jeep Wrangler Unlimited to accept your RV's tail, brake, and turn signal lights for flat…
The Replacement Shank for Gen-Y Adjustable Ball Mount part #325-GH-304 is my recommendation on an adjustable receiver used for flat-towing. It will provide up to a 7-1/2" rise or drop depending on configuration.
To answer your first question, according to Roadmaster, you won't actually require any additional wiring kit since your 2017 Jeep Compass will not run down the battery when being flat towed. I know this was a common issue for some Jeep Cherokees…
I did some research on your 2012 Edge and according to the owner's manual you can flat-tow the vehicle. You will want to check out the manual on page 232 for the guidelines and restrictions for recreational towing. There are several items needed…
The NSA Ready Brute Elite tow bar is a pretty iconic system and while we have carried it in the past, that was long enough ago that we don't really have too much information on the system anymore. I will say that while I do like the idea of…
Of course! To lock the TorkLift FastGun Turnbuckles for Bed-Mounted Camper Tie-Downs #TLS9520 you need the Pin Locks #TLS9500. This comes with 4 locks which is actually ideal since you would typically be using 4 of the FastGuns to secure your camper…
Hey Scott, With the majority of dual hitch receivers being specifically for flat towing or not being compatible with weight distribution hitches you'd have to use a Gen-Y stacked receiver like the Gen-Y #325-GH-624 (2-1/2" trailer hitch) or…
If you are not wanting to use a Adapter 7-Pole to 6-Pole #47549 and would rather wire in a new Hopkins 7-Way RV Style Connector #HM20087 the wiring may be confusing. There may be some trial and error involved as the wiring could have been connected…
Bring your bikes along when flat towing your vehicle. This handy adapter lines up your tow bar with your motorhomes hitch and gives you an extra receiver up top for a bike rack or cargo carrier. No need to leave the fun stuff behind.Highlights Dual 2" receivers let you connect a tow bar and carry a bike rack or cargo tray at the same time 8" rise or drop levels your tow bar for safe, even flat towing behind your motorhome Solid-steel shank is rated 10,000 lbs GTW and 400 lbs tongue weight Durable black powder-coat resists rust and road grime Lower receiver is for your tow bar; upper receiver is for non-tow, hitch-mounted accessories only Features to know about Levels Your Tow Bar Flip the adapter for an 8-inch rise or drop to match the tow-bar height Roadmaster recommends - keeps your baseplate and RV hitch in one straight line.
You've got a trailer and a bike rack. With this dual receiver, you can bring both.Features: Tow a trailer and mount a bike rack or another hitch accessory at the same time Resists rust: powder-coated steel Made in the USA Specs: For 2" x 2" receiverhitches Rise/drop: 6" Gross vehicle weight rating: 10,000 lbs Tongue weight rating: 400 lbs
Add a bike carrier or cargo carrier with the dual hitchreceiver.Features: Allows you to use a hitch-mounted bike rack or cargo carrier while towing your vehicle Constructed of sturdy steel Resists rust and corrosion with durable powder coat finish Requires pin and clip or hitch lock (sold separately) Specs: Application: 2" x 2" trailer hitches Dual receivers have 2" x 2" openings Drop: 2 " or 8" Rise: 2 " or 8" Gross towing weight: 10,000 lbs Tongue weight: 400 lbs Limited lifetime warranty Note: Not for use when towing a trailer.
Add a bike carrier or cargo carrier with this dual hitchreceiver.Features: Allows you to use a hitch-mounted bike rack or cargo carrier while towing your vehicle Constructed of sturdy steel Resists rust and corrosion with durable powder coat finish Requires pin and clip or hitch lock (sold separately) Specs: Application: 2" x 2" trailer hitches Dual receivers have 2" x 2" openings Drop: 2" or 10" Rise: 2" or 10" Gross towing weight: 10,000 lbs Tongue weight: 400 lbs Overall shank length: 15" Hitch pin hole diameter: 5/8" Limited lifetime warranty Note: Not for use when towing a trailer.
... Receiver intended for accessories only. Hitch pin and clip sold separately.Features: Ball mount lets you hook up your trailer to your tow vehicle Shank slides into your vehicle's hitchreceiver Ball platform provides mounting point for hitch ball (sold separately) 2" Square receiver allows you to carry hitch accessories while you tow Perfect for a bike rack or cargo carrier Sturdy steel is black powder coated for corrosion resistance Uses ball with 1" shank diameter Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitchreceivers Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Drop: 2-1/4" from inside of hitch opening Use in drop position only Accessory receiver size: 2" x 2" Distance from center of hitch pin hole to center of ball hole: 12-1/2" Overall length: 16-1/2" 90-Day warranty Notes: The receiver portion of this unit is designed for hitch-mounted accessories only.
Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 2" x 2" trailer hitchreceivers Built-in receiver size: 2" x 2" Maximum drop: 7-1/2" Maximum rise: 2-1/2" Gross towing weight: 10,000 lbs Tongue weight: 1,500 lbs Overall height: 13-3/16" Total length with included ball mount installed: 15-9/16" Total length without ball mount installed: 11-5/16" Hitch pin hole diameter: 5/8" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit.
Insert this heavy-duty mount into your 2-1/2" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 3 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 6" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 21,000 lbs Maximum tongue weight: 3,000 lbs Overall height: 9-1/2" Total length from center of pin hole with included ball mount installed: 13-1/4" Total length from center of pin hole without ball mount installed: 10-1/4" Distance from center of pin hole to first weld on shank: 4" Distance from center of pin hole to base of receivers: 5-5/8" Hitch pin hole diameter: 5/8" Distance between pin holes: 1" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit.
Insert this heavy-duty mount into your 2-1/2" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock (sold separately) provides connection point for trailer coupler 3 Stacked receivers accept included ball mount or a pintle lock (sold separately), as well as other hitch-mounted accessories Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip included - hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 6" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 21,000 lbs Maximum tongue weight: 3,000 lbs Overall height: 9-1/2" Total length from center of 5/8" pin hole with included ball mount installed: 12-1/4" Total length from center of 5/8" pin hole without ball mount installed: 9-1/4" Distance from center of 5/8" pin hole to first weld on shank: 4" Distance from center of 5/8" pin hole to base of receivers: 5-5/8" Hitch pin hole diameter: 5/8" Distance between pin holes: 1" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit.
Insert this heavy-duty mount into your 2-1/2" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 6" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 21,000 lbs Maximum tongue weight: 3,000 lbs Overall height: 12-1/2" Total length with included ball mount installed: 16-1/2" Total length without ball mount installed: 12" Hitch pin hole diameter: 5/8" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel with zinc primer and epoxy powder coat resists corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Optimal ride tongue weight (when used with 2-5/16" ball): 2,000 lbs - 3,500 lbs Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 12-13/16" Total from center of 5/8" pin hole with included ball mount installed: 17" Total length from center of 5/8" pin hole without ball mount installed: 12-3/4" Hitch pin hole diameters: 5/8" and 3/4" Distance between pin holes on shank: 1-1/2" 5 Year warranty on all moving parts Limited lifetime warranty on all remaining components
Ideal for the rough rigors of off-road towing or overlanding, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form an extra-strong connection that is safe and secure, no matter the terrain.Features: Vehicle-side hitch links with Lock 'N' Roll trailer-side coupler (sold separately) to hook up your trailer to your tow vehicle Shank inserts into your vehicle's trailer hitchreceiver Head unit provides attachment point for trailer-side coupler More secure connection than a traditional ball coupler Vehicle-side latching plates interlock with trailer-side coupler to form strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Bearing in head unit allows for 360 degrees of rotation Full articulation when paired with trailer-end coupler - setup pivots side to side and up and down Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Built-in drop or rise lets you match height between vehicle end and trailer end Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Attachment hardware included for securing latching plates Steel alloy construction is strong and durable Black paint finish resists corrosion Meets SAE J684 towing safety regulations Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitchreceivers Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Maximum drop: 2-1/2" Maximum rise: 2-1/2" Latching pin dimensions: Pin diameter: 1/2" Usable length: 4-3/4" Hitch pin hole diameter: 5/8" Limited lifetime warranty This hitch combines with a Lock 'N' Roll trailer-end coupler (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
Insert this heavy-duty mount into your 2" hitch to get 3 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 3 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 2" x 2" trailer hitchreceivers Built-in receiver size: 2" x 2" Maximum drop: 5" Maximum rise: 5" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 2,000 lbs Overall height: 8" Total length with included ball mount installed: 12-1/4" Total length without ball mount installed: 9-1/8" Hitch pin hole diameter: 5/8" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel with zinc primer and epoxy powder coat resists corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitchreceivers Built-in receiver size: 2" x 2" Maximum drop: 7-1/2" Optimal ride tongue weight (when used with 2-5/16" ball): 400 lbs - 1,100 lbs Gross towing weight: 10,000 lbs Maximum tongue weight: 1,100 lbs Overall height: 13-3/16" Total from back of shank with included ball mount installed: 19-11/16" Total length from back of shank without ball mount installed: 15-1/2" Hitch pin hole diameters: 5/8" Distance between pin holes on shank: 1-1/2" 5 Year warranty on all moving parts Limited lifetime warranty on all remaining components
Insert this heavy-duty mount into your 2" hitch to get 3 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball or 2-5/16" ball provides connection point for trailer coupler 3 Stacked receivers accept included ball mount, as well as other hitch-mounted accessories 1 Pin included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 2" x 2" trailer hitchreceivers Built-in receiver size: 2" x 2" Maximum drop: 5" Maximum rise: 5" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 2,000 lbs Overall height: 8" Total length with included ball mount installed: 12-1/4" Total length without ball mount installed: 9-1/8" Hitch pin hole diameter: 5/8" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit.
Insert this heavy-duty mount into your 3" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 3 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 6" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 9-3/4" Total length from center of 5/8" pin hole with included ball mount installed: 12" Total length from center of 5/8" pin hole without ball mount installed: 9" Distance from center of 5/8" pin hole to first weld on shank: 3" Distance from center of 5/8" pin hole to base of receivers: 4-5/8" Hitch pin hole diameters: 5/8" and 3/4" Distance between pin holes: 1" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit.
Insert this heavy-duty mount into your 2-1/2" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 9" Maximum rise: 9" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 12-3/4" Total length from center of 5/8" pin hole with included ball mount installed: 12" Total length from center of 5/8" pin hole without ball mount installed: 9" Distance from center of 5/8" pin hole to first weld on shank: 3" Distance from center of 5/8" pin hole to base of receivers: 4-5/8" Hitch pin hole diameters: 5/8" and 3/4" Distance between pin holes: 1" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories Shock-absorbing design ensures a smooth, steady ride Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 3" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 21,000 lbs Maximum tongue weight: 2,400 lbs Optimal ride tongue weight (when used with 2-5/16" ball): 1,600 lbs - 2,400 lbs Overall height: 12-1/2" Total from center of 5/8" pin hole with included ball mount installed: 17-3/8" Total length from center of 5/8" pin hole without ball mount installed: 14-3/8" Distance from adjustment pin hole to 2nd hitchreceiver pin hole: 12-3/8" Hitch pin hole diameters: 5/8" and 3/4" Accessory pin hole diameter: 5/8" 10-Year limited warranty This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 4 stacked 2-1/2" receivers.
Insert this heavy-duty mount into your 3" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. ... Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitchreceiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitchreceiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitchreceivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 9" Maximum rise: 9" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 12-3/4" Total length with included ball mount installed: 17-3/8" Total length without ball mount installed: 13" Hitch pin hole diameters: 5/8" and 3/4" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Filters
