Replace the spindle nuts, washers, and cotter pins on your axle shaft with this kit from CE Smith.Features: Replaces the spindle nuts on your 1" axle shaft Includes 2 shaft washers and cotter pins Specs: Spindle nut diameters: Outer diameter: 1-3/8" Inner diameter: 7/8" Cotter pin length: 1-3/4"
Replaces (1) 9/16" washer for your Lippert tandem axle lift kit (LC407131).Features: Replaces a 9/16" washer for your Lippert tandem axle lift kit (LC407131) Quantity: 1 washer 12 Washers required for complete installation Fits: Model LC407131 , Lippert tandem axle lift kit
Replaces a washer needed for your Dexter trailer suspension kit (23-428, 23-429, or 23-428-429).Features: Replaces a washer needed for your Dexter trailer suspension kit (23-428, 23-429, or 23-428-429) Quantity: 1 washer
Hey Scott! The correct bearing kit for your Dexter 6k axle is the Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal #BK3-100. If you want the Dexter version it is the #DX26ER. What kind of trailer do you have?
Yes, you can switch from using a Tang Washer #5-101 to the Spindle Nut Kit #RG05-100. This kit includes 2 Retainers #6-190, 2 Nuts #6-191 and 2 D-Washers #5-23.
The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…
A replacement tang-style spindle washer like part #5-101 is intended to be installed behind the castle nut and have its prongs bent down so that they prevent the castle nut from rotating on an E-Z Lube type spindle. The castle nut holds the washer in…
Torque specs for trailer and vehicle wheels are based on the size of the wheel stud, the type of lug nut, and the material the wheel is made of, steel or aluminum. For example, the linked chart shows you the varying torque values for a range of…
For a 4400-lb Lippert axle the most popular grease seal is part #58846. This is a double-lip grease seal with an inside diameter of 1.719-inches and an outside diameter of 2.565-inches. This seal is often used along with inner wheel bearing #L68149…
Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
You actually shouldn't be using a B&W Companion hitch with a Sidewinder at all. The problem is because of the single attachment point and the force applied to the hitch from the Sidewinder it could cause the gooseneck hitch under the bed to…
Hey Chris! The measurements for the bearings and races in the Bearing Kit item #BK3-210 are listed below: The Replacement Trailer Hub Bearing - 14125A item #14125A has a inner diameter of 1.250". The Replacement Trailer Hub Bearing - 25580 item…
The Dexter hub you referenced, 8-201, is a 5,200 lb hub, though a 5 on 4-1/2 bolt pattern does not come on 5,200 lb hubs. The correct bearings for the 5,200 lb hub are #25580 and #LM67048, while the proper races are #25520 and #LM67010. I have…
Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.Features: Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle Includes: 1 Outer bearing (L44649) 1 Inner bearing (L68149) 1 Inner cup (L68111) 1 Outer cup (L44610) 1 Grease seal (10-19) 1 Cotter pin 1 Tang washer for EZ-Lube spindles Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D.
Replacement spindle welds onto your 3,000-lb trailer axle. Works with AH15450ECOMP agricultural hub assembly. Castle nut, washer, and cotter pin included.Features: Tapered spindle replaces a worn or damaged spindle on your trailer Can also be used to build a custom axle Weld-on installation Sturdy steel construction Castle nut, washer, and cotter pin included Specs: Application: 3,000-lb round trailer axles Works with 633 agricultural hub (AH15450ECOMP - sold separately) Spindle capacity: 1,500 lbs Stub dimensions: 1-5/8" diameter x 5-7/8" long Overall spindle length: 10-1/2" Bearing, Race, and Seal Information Bearings (sold separately): Inner bearing: LM67048 (1.25" inner diameter) Outer bearing: LM11949 (0.75" inner diameter) Races (sold separately): Inner race: L67010 Outer race: L11910 Grease seal (sold separately): SL150 Inner diameter: 1.50" Outer diameter: 2.335" Part Number Capacity A B C D E F Round/Square TRU54FR 1,500 lbs 1.625" 1.50" 1.25" 0.75" 0.75" 5.875" Round
Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. Flange lets you attach a brake assembly. ... Features: Tapered spindle replaces a worn or damaged #84 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mounting flange lets you bolt on a brake assembly Weld-on installation Sturdy steel construction Castle nut, tang washer, and D-washer included Specs: Application: 3,500-lb trailer axles Spindle capacity: 1,750 lbs Stub dimensions: 1-3/4" diameter x 4-1/4" long Overall spindle length: 9" Brake flange configuration: 4 bolt Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately) Inner race: L68111 Outer race: L44610 Grease seal (sold separately): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Part Number Capacity A B C D E F Round/Square TRU74FR 1,750 lbs 1.75" 1.719" 1.378" 1.063" 1.00" 4.25" Round - E-Z Lube and Brake Flange
Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. ... Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. ... Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 95" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 80" from spring-center-to-spring-center. ... Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Round trailer axle beam measures 60" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 48" from spring-center-to-spring-center. ... Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Lift kit raises your trailer frame by 3-1/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities.Features: Lift kit raises your trailer frame to provide 3-1/8" additional clearance between trailer frame and axle Designed for use on trailers with tandem, #12 Torflex axles with 5,500-7,000-lb capacities Spacers attach to side-mount brackets on your trailer's frame Not compatible with top-mounted torsion axles Includes: 4 Frame spacers (003-401-02) 24 Washers (005-111-00) (16) 5/8"-18 Hex lock nuts (006-126-00) (16) 5/8"-18 Screw hex cap bolts (007-177-00) Bolt length: 1-1/2" Note: Lift kit cannot be used with 3" tall brackets.
Lift kit raises your trailer frame by 2-7/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with side-mounted #11 Torflex axles with 4,100-6,000-lb capacities.Features: Lift kit raises your trailer frame to provide 2-7/8" additional clearance between trailer frame and axle Designed for use on trailers with tandem, #11 Torflex axles with 4,100-6,000-lb capacities Spacers attach to side-mount brackets on your trailer's frame Not compatible with top-mounted torsion axles Includes: 4 Frame spacers (003-400-02) 24 Washers (005-111-00) (16) 5/8"-18 Hex lock nuts (006-126-00) (16) 5/8"-18 Screw hex cap bolts (007-177-00) Bolt length: 1-1/2" Specs: Spacer dimensions: 11" long x 2-3/4" wide x 2-1/2" tall Bottom lip to center of side mounting hole: 1-1/4" tall Distance between mounting bolt holes: 9-1/2" Note: Lift kit cannot be used with 3" tall brackets.
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities.Features: Lift kit raises your trailer frame to provide 2-5/8" additional clearance between trailer frame and axle Designed for use on trailers with tandem, #10 Torflex axles with 2,300 to 4,000-lb capacities Spacers attach to side-mount brackets on your trailer's frame Not compatible with top-mounted torsion axles Includes: (4) #10 Frame spacers (003-377-02) 24 Plain washers (005-111-00) 16 Locking hex nuts (006-126-00) 16 Hex screws (007-177-00) Distance between bolt holes center to center: 8" Note: Lift kit cannot be used with Torflex axles with 3" high profile brackets.
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities.Features: Lift kit raises your trailer frame to provide 2-5/8" additional clearance between trailer frame and axle Designed for use on trailers with a single #10 Torflex axle with 2,300 to 4,000-lb capacities Spacers attach to side-mount brackets on your trailer's frame Not compatible with top-mounted torsion axles Includes: (2) #10 Frame spacers (003-377-02) 12 Plain washers (005-111-00) 8 Locking hex nuts (006-126-00) 8 Hex screws (007-177-00) Distance between bolt holes center to center: 8" Note: Lift kit cannot be used with Torflex axles with 3" high profile brackets or Norco brackets.
Square trailer axle beam measures 57-1/2" from hub face to hub face (when hubs - sold separately - are mounted) and 46-1/2" from spring center to spring center. ... Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
Lift kit raises your trailer frame by 2-7/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with side-mounted #11 Torflex axles with 4,100-6,000-lb capacities.Features: Lift kit raises your trailer frame to provide 2-7/8" additional clearance between trailer frame and axle Designed for use on trailers with a single, #11 Torflex axle with 4,100-6,000-lb capacities Spacers attach to side-mount brackets on your trailer's frame Not compatible with top-mounted torsion axles Includes: 2 Frame spacers (003-400-02) 12 Washers (005-111-00) (8) 5/8"-18 Hex lock nuts (006-126-00) (8) 5/8"-18 Screw hex cap bolts (007-177-00) Bolt length: 1-1/2" Specs: Spacer dimensions: 11" long x 2-3/4" wide x 2-1/2" tall Bottom lip to center of side mounting hole: 1-1/4" tall Distance between mounting bolt holes: 9-1/2" Note: Lift kit cannot be used with 3" tall brackets.
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with #9 Torflex axles with a 2,000-lb capacity.Features: Lift kit raises your trailer frame to provide 2-5/8" additional clearance between trailer frame and axle Designed for use on trailers with #9 Torflex axles with 2,000 lb capacity Spacers attach to side-mount brackets on your trailer's frame Not compatible with top-mounted torsion axles Includes: (2) #9 Frame spacers (003-399-02) 12 Plain washers (005-080-00) 8 Locking hex nuts (006-125-00) 8 Hex screws (007-153-00) Distance between bolt holes center to center: 7-3/4" Note: Lift kit cannot be used with Torflex axles with 3" high profile brackets.
Round trailer axle beam measures 72" from hub face to hub face (when hubs - sold separately - are mounted) and 58" from spring center to spring center.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately) Low ride height makes it easier to load and unload your trailer Straight spindles - no drop Standard grease application Spring seats and spindles are welded on Limited 2-year warranty Specs: Weight capacity: 2,000 lbs Hub-face-to-hub-face length: 72" Spring-center-to-spring-center length: 58" Tubing outer diameter: 1-3/4" Spindle size: 1-1/16" Spindle washer sold separately Bearings (sold separately): Inner bearing: L44649 Outer bearing: L44649 Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle. Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer.Features: This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer Specs: L44649 Bearing inner diameter: 1.063" L68149 Bearing inner diameter: 1.378" L44610 Race outer diameter: 1.980" L68111 Race outer diameter: 2.361" Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D.
Replacement BTR E-Z Lube spindle welds onto your 2,000-lb trailer axle. Works with L44649 inner and outer bearings. Grease zerk makes greasing fast and easy. Castle nut, washer, and cotter pin included.Features: Straight spindle replaces a worn or damaged BTR E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Weld-on installation Sturdy steel construction Castle nut, tang washer, and D-washer included Specs: Application: 2,000-lb trailer axles Spindle capacity: 1,000 lbs Stub dimensions: 1-1/4" diameter x 4" long Overall spindle length: 9-1/2" Bearing, Race, and Seal Information Bearings (sold separately): Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (sold separately): Inner race: L44610 Outer race: L44610 Grease seal (sold separately): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Part Number Capacity A B C D E F Round/Square TRU44FR 1,000 lbs 1.25" 1.50" 1.06" 1.06" 1.00" 4.00" Round - E-Z Lube
Filters
