Test, check, connect. The built-in LED tester and adapter work together so your trailer's ready when you are.Signal Ready: Supports brake, turn, taillight, and ground signals. 6 Round to 4 Flat: Adapts a 6 Round trailer to a 4 Flat. Quick Check: Test connections before you tow.
Quickly and easily convert a 6-pole, round pin connector to a 4-pole, flat connector with this RV connector adapter. Adapter has a non-corrosive nylon shell.Features: 6-Pole to 4-pole RV flat adapter Quick and easy conversion of 6-pole, round pin connector on your vehicle to the 4-pole flat connector on your trailer Connects Ground, Left Turn, Right Turn, Stop and Tail Light circuits Non-corrosive nylon shell and insert Specs: Application: Vehicles with 6-poleconnectors 1-Year limited warranty This adapter will make the two trailer connectors pictured below work together. 6-PoleConnector Socket on vehicle 4-Way connector on trailer
This adapter lets you use your 6-way round connector with a 4-way flat, trailer-end plug. It includes a circuit tester with red LEDs, and the 5" long, flexible wire between the plugs makes for easy hookup.Features: Adapter converts your 6-pole round, vehicle-end connector to a 4-wire flat connector Integrated circuit tester with red LEDs lets you know when wiring is functioning properly Flexible wire between plugs provides larger range of motion for more convenient hookup than with standard adapters Large, easy-pull grip design makes installing and removing the plug effortless Built-in cover and included grease packet help to protect the terminals from dust, grime and corrosion Cover also prevents grease from spreading all over during storage Specs: Distance between plugs: 5" 3-Year limited warranty This adapter allows the 6-way round, vehicle-end connector pictured on the left to work with the 4-way flat, trailer-end connector on the right.
You are halfway through a wiring repair when you realize you do not need to start over. You plug the loop between your vehicle and trailer, see the lights come back to life, and get back on the road without reworking the whole setup.Reliable Signal Flow: 16-gauge wire maintains steady power to trailer lights. Dual-End Setup: Includes both vehicle-side and trailer-side connectors for a full link. Ideal for Extensions: Works as a short jumper when you need to bridge wiring gaps. Specs Electrical and Compatibility: Connector type: 6-pole square Application: Vehicle and trailer ends Wire gauge: 16 AWG Length: 12 inches total
This heavy-duty, coiled cable adapter is compatible with a 7-way RV blade trailer socket on the vehicle and adapts it to work with a 6-way connector on the trailer. Center pin on trailer side connector must be for the brake function.Features: Heavy-duty, coiled cable Weatherproof jacketing Easy-grip connectors Tin-plated terminals for corrosion resistance Specs: 3' Cable when stretched 7 RV blade to 6-pole round connector Adapter works with on trailers where the center pin is used for the electric brake signal Flex Coil Adapters provide increased durability and the additional length that may be necessary to reach between the tow vehicle's socket and the trailer/towed vehicle's plug.
Establish a secure connection between your trailer and tow vehicle with this 6-pole plug. Round brass pins ensure minimum voltage drop, and pull grips enable easy insertion and removal.Features: Standard, 6-pole plug connects trailer to socket on tow vehicle Round, floating, solid brass terminal pins Minimum voltage drop is ensured Coated with dielectric (non-conducting) grease Prevents corrosion and resistance Easy alignment and maximum contact Solid steel terminal screws Die-cast housing for durability Tapered design with jumbo, finger-pull grips Easy hand-position pull Cable lock with plated steel retainer screw High-impact, ABS thermoplastic interior Includes extended lip for easy removal and replacement Accepts up to #12 gauge wires Has key and keyway to eliminate twisting and breakage Replaceable - minimizes maintenance costs Specs: Volt rating: 6 volts - 28 volts Current rating: 40 continuous-duty amps Wiring configuration: Color - circuit: White - Ground Return Brown - Tail Lights Yellow - Left Turn Red - Stop and/or Electric Brakes Green - Right Turn Blue - Auxiliary Circuit 1-Year limited warranty
That’s actually a common and temporary side effect, Greg. Most towed vehicles store a little vacuum brake assist even after the engine shuts off. During setup, the Curt Braking System #RVi44FR removes that vacuum assist to prevent overbraking, but if…
Hey Danny, thanks for the picture! The Curt RVi Series Shadow 2 Flat Tow Brake System item #RVI94FR is compatible with your 2018 Jeep JK Wrangler Unlimited. This system is brand new so we haven't had a chance to install it on a Jeep yet. I have…
The breakaway systems for supplemental braking systems are built into them and aren't something you add after the fact. For example, the Blue Ox Patriot part #BLU37TR has a breakaway system already built into it that is included.
Hi J, Honestly the Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR and Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM39VR for your 2024 Jeep Wrangler are the same thing. They are both plug-in so you don't have to cut any…
The Blue Ox Base Plate Kit #BLU53FR will fit your 2021 Jeep Gladiator with the factory steel bumper even with the winch installed, which has been confirmed by Blue Ox. This kit has a hidden design with removable arms to provide a clean, seamless look…
Hey Bill, what you want is a single piece stainless steel lug nut like the part #KALN1375S. These won't corrode, swell up, or come apart like the chrome plated ones that you tried so you'll be really happy with them. These are for 1/2 inch…
Hey John, you'd want the part #BLU56HR for a diode wiring kit that fits the 2024 GMC Sierra 2500 with the animated taillights. I also attached a link on this page to a PDF that details how they install on the new style of taillights the truck has…
Hey Dellos, the Blue Ox base plate and tow bars are in my opinion the easiest to use and are also very well made so I would recommend the Blue Ox part #BX1139 with the tow bar part #BX7420. Then for lighting the Curt kit part #C96JR is a very simple…
Hey Tracy, for a no-splice tow bar lighting solution for your 2025 Jeep Wrangler you'd want the Blue Ox part #BLU79FR. This doesn't have a 6-way on it though so you would need an adapter to go from the 4-way to it like with the part #RM59DQ…
Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket…
Hey Norbert, our flat tow vehicle charger kits like the BrakeBuddy part #BB54FR that you referenced don't have an off switch when the battery is charged but the charge is such a low amp charge that it's not going to overcharge the battery or…
Alex, pairing is required to get full functionality. The Bullseye monitor needs to be manually paired with your Shadow 2 brake system #RVI94FR during setup. It doesn’t arrive pre-paired, so you’ll want to leave the breakaway cable unplugged during…
Built tough with a die-cast metal housing, this 6-way round plug keeps your trailer connected and your wiring protected. The built-in cable guard fights chafing, while the stainless steel spring keeps things snug.Features to know about Durable and Reliable Connections: Heavy-Duty Metal Construction Tired of worrying about the durability of your trailer connectors? The Pollak 6-Pole, Round Pin Trailer Wiring Connector offers a solution with its zinc die-cast housing. This ensures long-lasting use even in demanding conditions, providing steadfast connections between your trailer and tow vehicle without compromise.
Use this Curt 6-way wiring connector to attach to your trailer or pop-up camper. The adapter is constructed of molded rubber and the 12" loop has 6-way square vehicle and trailer ends.Features: Wiring connector allows for quick, simple connection of your trailer or camper to your vehicle No cutting or splicing required One connector plugs into your vehicle Other end plugs into the connector on your trailer 12" Long wires have protective covering to deter damage 1-Year limited warranty
You're getting ready to haul your trailer for the weekend. This connector gives you a dependable link between your vehicle and trailer so every light and signal works like it should.Durable Build: Heavy duty die-cast zinc housing resists wear. Secure Fit: 6 Round trailer-end connector maintains stable contact. Easy Setup: Simple plug-in installation with no special tools.
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Features: Provides both a 7-way RV-style and a 4-pole flat trailer connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Compatible with 5-pole and 6-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Locate connection point behind rear bumper Plug in connector Includes mounting bracket and hardware Comes with protective covers for connectors Assembled in the USA Limited 1-year warranty Installation This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Locate connection point behind driver's-side rear bumper Plug in T-connector Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 7.5 amps per circuit Tail lights: 7.5 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side rear bumper.
Quickly and easily install a 6-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Once installation is complete, the connectors will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket is included to keep the connectors secure. It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 6-pole and 4-poleconnectors - to help prevent corrosion.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Locate connection point in rear cargo area Plug in connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area.
Convert your vehicle's EZ Connector trailer connector to a standard 6-way round socket. O-rings on the plug make a watertight seal with your outlet. Spring-loaded lid protects 6-pole socket when it's not in use.Features: Adapter converts your EZ Connector vehicle-end socket for use with a 6-way round trailer-end plug Face-to-face electrical contacts on EZ Connector side - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Double O-ring on plug creates watertight seal with socket to keep out moisture and debris Thumb notch on plug allows for easy alignment Twist plug until tabs line up and adapter snaps into place Spring-loaded lid on 6-way protects terminals from dirt and debris when connector is not in use Made in the USA
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Locate connection point in rear cargo area Plug in connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the interior trim panel in your rear cargo area.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points behind tail lights Plug in T-connector Run hot lead to car battery Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points behind tail lights Plug in T-connector Run hot lead to car battery Includes powered tail light converter that connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3.0 amps per circuit Tail lights: 6.0 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, behind the driver's-side and passenger's-side tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points in rear cargo area Plug in T-connector Run hot lead to car battery Includes a powered tail light converter that connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3.0 amps per circuit Tail lights: 6.0 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly in OEM tow package port. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection point in rear cargo area Plug in T-connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's factory tow package, which is located in your cargo area, on the driver's side.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points behind tail lights Plug in T-connector Run hot lead to car battery Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points in rear cargo area Plug in T-connector Run hot lead to car battery Includes a powered tail light converter that connects directly to your battery to avoid overloading your vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3.0 amps per circuit Tail lights: 6.0 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points in rear cargo area Plug in T-connector Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located in your rear cargo area.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connectors plug directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Tow harness with 4-way connector plugs into connection point in rear cargo area Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit 1-Year limited warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Features: Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately) Connects quickly and easily Locate connection points in rear cargo area Plug in T-connector Run hot lead to car battery Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Constructed using surface-mount technology (SMT) for consistent, reliable performance Maximizes trailer light yield and intensity while producing minimal heat Ensures superior operation in rough road conditions Comes with dust cap for 4-way flat connector Specs: Maximum amperage: Stop/turn lights: 3 amps per circuit Tail lights: 6 amps per circuit Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights.
Filters
