Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for ... : 2" Mounting: 3" x5" straight tongue Capacity: 7,500 lbs 2-Year limited warranty When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward
Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for ... better at reducing corrosion than cast steel master cylinders Primed finish Weld-on installation Made in the USA Specs: Application: hydraulic disc brakes Ball size: 2" Mounting: 3" x5
Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for ... better at reducing corrosion than cast steel master cylinders Primed finish Weld-on installation Made in the USA Specs: Application: hydraulic disc brakes Ball size: 2" Mounting: 3" x5
Use with actuators or standard couplers to create a foldaway tongue up to 48" long so that your trailer can be stored in even the smallest garage. Unique offset design guarantees superior ... Corrosion-resistant, Z-max 600 zinc finish Mounting hardware, pivot bolt and pivot pin and clip included Not for use on aluminum trailer frames Specs: Application: 3" x5" trailer tongue Trailer tongue
The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels. hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 14", 14-1/2", and 15" Axle
Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels ... distance: 2-7/8" apart on center Wheel size: 14", 14-1/2", and 15" Axle rating: 3,500 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes
7-3/4" x3-1/8" Rectangle. Waterproof trailer tail light serves 6 functions: brake, tail, turn, reflex, side marker, and license plate light. Durable polycarbonate lens and housing. Surface ... housing Red screw-on lens over white LED Surface mount on trailer - hardware included Molded 3-prong plug provides a watertight connection DOT compliant Specs: Configuration: driver side Passenger side
If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 10" x 2-1/4" Assemblies fit 14" to 15" ... ;, 14-1/2", and 15" Axle rating: 3,500 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above
8-5/8" Incandescent RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the RV, with a lens that snaps on so it's easy to replace the bulb. It ... side) Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" thick Power draw at 12.8 volts: Stop light: 2.65 amps Tail light: 2.1 amps 3-Year warranty
8-5/8" x3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with ... (RVSTLB0060) sold separately Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" deep Height with license plate bracket: 5" Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.34
8-3/8" x5-3/4" Low-profile, LED tail light displays brake, tail, and turn signals on your RV. It comes with a built-in reflector. It mounts on the surface of the motorhome and hardwires ... Polycarbonate lens and housing Surface mount Included gasket creates weathertight seal Hardware not included 3-Wire harness hardwires to RV Specs: Dimensions: 8-3/8" long x5-3/4" tall x 7/8" thick
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. It wires to your RV with the ... : 8-5/8" long x3-3/16" tall x 2-1/4" thick Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
8-5/8" x3-3/16" Rectangle. RV light serves 4 functions: brake, tail, turn, and license plate light. ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with ... (RVSTL0060) sold separately Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" deep Height with license plate bracket: 5" Power draw at 12.8 volts: Stop/turn signal light: 0.34 amps Tail
6-3/4" Tall LED light displays brake, tail, turn, and backup signals on the driver side and provides a license plate light. Includes built-in reflector. Mounts in a cutout, using the flange and ... harness hardwires to trailer Specs: Application: driver side Passenger side: PE96CR (sold separately) Overall dimensions: 5-3/4" wide x 6-3/4" tall x3-1/16" thick Compatible with 12V DC
8-5/8" RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the motorhome and wires to the RV. side (right-hand side) Driver's-side light: RVSTL0061 (sold separately) Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" thick Power draw at 12.8 volts: Stop/turn signal light
8-5/8" Incandescent RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the RV, with a lens that snaps on so it's easy to replace the bulb. It ... : passenger's side (right-hand side) Driver side: RVST61 (sold separately) Light dimensions: 8-5/8" long x3-3/16" tall x 2-1/4" thick Bulb type: 1157 bulb Power draw at 12.8 volts: Brake light
6-3/4" Tall LED light displays brake, tail, turn, and backup signals on the passenger side of your trailer and has a built-in reflector. Mounts in a cutout, using the flange and included studs ... Specs: Application: passenger side Driver side: PE46CR (sold separately) Overall dimensions: 5-3/4" wide x 6-3/4" tall x3-1/16" thick Compatible with 12V DC systems Diodes: 29 Power draw
Energy-efficient LEDs in this waterproof dome light are vibration-resistant when driving over rough roads to the campsite. Wires to a light switch in your RV so you can easily turn the light on and off when you need to do the dishes after dinner. dimensions: 5-3/4" long x 2-3/4" wide x 11/16" deep Voltage: 12V DC Power draw at 12.8 volts: 0.33 amps Light output: Raw lumens: 400 lumens Effective lumens: 227lumens Number of LEDs: 9
5-3/4" LED light displays brake, tail, and turn signals on your trailer. It mounts in a cutout using a grommet (sold separately) and hardwires to your trailer with the stripped wire pigtail.; Stripped wire pigtail harness to trailer DOT compliant Meets FMVSS 108 requirements Specs: Overall dimensions: 5-3/4" wide x3-7/16" tall x 1-5/16" thick Fits 5-1/2" wide x3
6-1/2" x 2-1/4" Oval. Waterproof incandescent trailer light functions as a back-up light. Shock proof socket protects bulb. Recessed mount with included grommet. Industry standard 2-prong ... protects bulb from damage Durable polycarbonate lens and housing Clear lens Recessed mount with included grommet Industry standard 2-prong plug Specs: Overall dimensions: 7-5/8" long x3-3/8" tall
6-5/16" x3-5/16" Oval LED light functions as an RV porch light or utility light with 16 diodes producing bright light at a downward angle. Durable SMD LEDs better withstand shock and ... hardware not included 2-Wire design includes power lead and ground wire Specs: Dimensions: 6-5/16" long x3-5/16" tall x 1-7/16" thick Distance between mounting holes (center on center
5-5/16" x3-7/16". Waterproof, incandescent tail light serves as a stop, tail, and turn signal. Shock-proof socket protects bulb against damage. Recessed mount with grommet (not included ... 3-prong plug (A45PB or A47PB - sold separately) Specs: 5-5/16" long x3-7/16" tall x 1-15/16" thick Bulb type: incandescent Power draw at 12.8V: Stop/turn: 2.19 amps Tail: 0.49 amps 3
5-5/8" x3-1/8" Rectangle. Low-profile LED utility light illuminates an area with warm white light. Durable white polycarbonate base and screw-on acrylic lens. Mounts on surface of trailer ... Specs: Dimensions: 5-3/4" long x3-1/8" tall x 1" deep Diodes: 12 Power draw at 12V: 0.21 amps Wattage: 2.5 watts Operating voltage: 12V-30V DC Wire length: 4" 1-Year limited warranty
Filters
