Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This rectangular 5-5/16" x 3-7/16" light covers all your main trailer lighting needs in one unit—stop, turn, and tail. It’s built with an incandescent bulb that connects easily through a standard 3-prong plug for simple power and ground hookups on a 12V DC system. The durable polycarbonate lens gives clean, bright light that stays visible and consistent mile after mile.
When your trailer sees wet roads or full submersion, this light is ready for it. The housing and lens are sonically sealed into a single waterproof piece that keeps moisture out completely. That sealed design protects the bulb and contacts from corrosion or shorting, keeping your lights working even after repeated dunkings.
Bumps, vibration, and rough roads can destroy ordinary bulbs. This light uses a shock-proof socket that absorbs impact to protect the incandescent bulb from damage. It’s a simple but solid safeguard that makes the light more reliable on uneven terrain or during long hauls.
The recessed mount design lets this light sit neatly into your trailer body for a clean finish. It works with the A33GB grommet (sold separately) and accepts industry-standard wiring harnesses like the A45PB or A47PB. When mounted with the proper grommet, you’ll need a 5-7/16" x 3-3/4" hole—just right for a snug, professional fit.
At 12.8V, the stop and turn functions draw 2.19 amps while the tail circuit uses just 0.49 amps. That balance means bright brake and signal lighting when you need it most, without unnecessary load on your electrical system. Backed by a 3-year warranty, it’s built to stay dependable trip after trip.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number ST33RB. This is the Optronics flush mount rectangle trailer stop, turn and tail light. This is a red rectangular light; serves 3 functions - stop light, turn and tail light. It is a sealed, waterproof housing and lens unit. In the inside is a heavy-duty long-life bulb and the socket at that bulb is in a shockproof socket, which guarantees a long bulb life. On the back, you'll notice it does accept the industry standard, 3-prong plugs to install it. This light is designed to flush mounts in a mounting grommet and then the 3-prong plug to plug in the supply power.
Those are required for installation. If you already have those, you can use that. If not, we do sell those parts separately. This is the grommet that it uses. It's part number A33GB.
Basically, you just pop that in there. Then there's the right angle 3-wire pigtail. They offer 2 different 3-wire pigtails. This is the right angle design. It's part number A47PB, sold separately.
The reason it's a right angle you can see when you plug it in, the wires come down at a right angle. If you plug it in like that, you can see that the wires are coming out at a right angle. I'll go ahead and pop that off. Then the other 3-wire pigtail is the straight 3-wire pigtail, A45PB. You can see those when you plug it in, the wires just come out straight.
Either one, whichever is going to fit for your application. A few dimensions on this; the overall and again, this is from edge to edge; edge to edge you're looking at about 5-5/16". The height again is going to be, edge to edge is going to be right in about 3-7/16"; and then the depth on it is going to be right at 2" inches deep. What I'm going to do now is we're going to hook, let's take the straight wire pigtail. We'll go ahead and plug it in and then hook this up to a 12-volt power supply. You have that plugged in, you got your 3 wires coming out. White is your ground, black is your tail light and your red is your stop and turn. What we're going to do is I got a 12-volt power supply here; we'll hook it up to. We'll go ahead and hook up the white for the ground; hook up the red for the stop and the turn; then we'll hook up the black for the tail light function. Now what we're going to do is going to go ahead and turn off the overhead lights. We'll go ahead and turn on the 12-volt power supply and you can see there's your tail light function. When you hit your brakes, you can see the other filament would light up and be stronger, so that would be your brake light. When you hit your turn, it will be the same dual filament; the upper filament would be your turn signal. We're going to turn off our power; turn back on our overhead light. That should do it for the review on part number ST33RB. This is the Optronics flush mount rectangle trailer stop, turn and tail light. .
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

Jack
2/20/2019
Still working great.

Rd
3/10/2017
Still working perfectly!

Chip G.
8/21/2017
light is still working great one year later
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Renee O.
1/9/2018
They are great, no issues.