Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" wheels. 5 bolt pattern backing plate. Made in the USA.
12" x 2" Driver's-side electric trailer brake assembly fits 7,000-lb axles. Mounting flange has a 5-bolt pattern. Fits 14-1/2", 15", 16", and 16-1/2" wheels.
12" x 2" Passenger's-side electric trailer brake assembly fits 7,000-lb axles. Mounting flange has a 5-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 14-1/2" to 16-1/2" wheels.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.
Whether you're replacing your trailer brakes or putting some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. 5-Bolt pattern backing plate. Made in the USA.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter. bushing: 11/16" Leaf thickness: 1-1/16" Number of leaves: 3 Additional dimensions: see table Part Number A B C D 072-023-00 13" - 25-1/4" 3" Note: To ensure proper axle alignment
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hey Alex, I don't have a way to know exactly what leaf spring your NV19 trailer has/needs but there's a pretty good chance the part #e34SR is correct. 25-1/4 inch length is a very common length but so is 26 inch like the part #e94SR so you…
I sure can Bob and thanks for the information! Since you have a Lippert 3,500 lbs axle you'll be able to use the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles item #AKHD-545-35-EZ-K, you were looking at. These have a 5 on 4-1/2 lug nut…
Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…
I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part #AKEBRK-35-SA (3,500 Axles) Dexter…
Hello Scott, thanks for reaching out. The etrailer Electric Trailer Brakes #AKEBRK-7-SA come with a left hand and right hand brake assembly. The brake drums are sold separately. Typically, the 7K brake assemblies would go with a 7K hub such as part…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
Hey Nicholas, thanks for reaching out! The rotors in the E-Coat Dexter Disc Brake Kit #K71-633-2 are being discontinued so even if we had everything else available separately in a different kit I'd recommend going with a different disc brake kit…
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and protective dust shields. Fits 15" or larger wheels.
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. Made in the USA.
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. Made in the USA.
If your trailer sees off-road action, adding hand brakes (sold separately) offers more peace of mind when parking on sloped surfaces. 12" x 2" Assemblies fit most 14-1/2", 15", and 16" wheels. Made in the USA.
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Replaces the right side adjusting screw for your Dexter 12-1/4" electric brake assemblies with cast backing plates.Features: Replaces the right side adjusting screw for your Dexter 12-1/4" electric brake assemblies with cast backing plate 12-1/4" x 3-3/8" (023-450-00, 023-451-00, 023-434-00, and
Replaces the left side adjusting screw for your Dexter 12-1/4" electric brake assemblies with cast backing plates.Features: Replaces the left side adjusting screw for your Dexter 12-1/4" electric brake assemblies with cast backing plate 12-1/4" x 3-3/8" (023-450-00, 023-451-00, 023-434-00, and
Replaces the left side adjusting screw for your Dexter 12-1/4" electric brake assemblies with stamped backing plates.Features: Replaces the left side adjusting screw for your Dexter 12-1/4" electric brake assemblies with stamped backing plate 12-1/4" x 3-3/8" (023-450-00, 023-451-00, 023-434-00, and
Replaces the right side adjusting screw for your Dexter 12-1/4" electric brake assemblies with stamped backing plates.Features: Replaces the right side adjusting screw for your Dexter 12-1/4" electric brake assemblies with stamped backing plate 12-1/4" x 3-3/8" (023-450-00, 023-451-00, 023-434-00, and
Free-backing hydraulic drum brakes won't lock up when you back up, even if your actuator is engaged. 12" x 2" Assemblies have e-coated backing plates. Fit 14-1/2" to 17-1/2" wheels. Made in the USA.
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
... screw (048-022-00) is sold separately.Features: Adjustment screw fits 10" and 12", Dexter Nev-R-Adjust electric brake assemblies Compatible with right-hand assemblies only Left hand adjuster screw (048-022-00) - sold separately
Filters
