1992 Chevrolet Suburban Salt Spreader

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Peter; this is a bit of a hot topic right now. If you 100% for sure have the tow package on your 2025 Equinox you should be able to use the #C44FR. However, we have had some people have issues with this on the vehicle side. I'm not sure if…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hi Scott, We do have a couple options for running boards that fit your 2025 Dodge Durango R/T Anniversary Plus, from Romik. These are from Romik, and you have a couple of styles to choose from: - Romik RB2 Running Boards w/ Custom Install Kit…

While we don't have any custom fit trailer wiring harnesses that fit the 2011 Isuzu NPR we can still help with a universal fit option like the #C56175 which you'd have to wire to the taillight circuits of your NPR.

Jon, our techs have not reported any issues with that feature so the Draw-Tite Max-Frame #DT38KV won't interfere. If by any chance they don't work traditionally, we've found success in situations like this before by kicking to either side…

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

Yes, it will Leonard! The Draw-Tite Hitch item #DT22MR has been confirmed to fit the 2025 Kia Sportage. This class III hitch is custom fit and bolts to your Kia with included hardware. It has a 2" receiver with a 3,500 lbs towing capacity and a…

Hey Jim, thanks for reaching out! Curt just came out with the Hitch Receiver #C89RV for your 2024 Chevy Equinox EV so you'll be able to utilize it with the T-Connector #C44FR wiring kit!

Hi Dan, The etrailer Trailer Hitch Receiver #e36YR is 42" overall and the crosstube measures 36" in length. It's designed to fit 2019 - 2025 Chevrolet Blazers (excluding Premier models). If you need anything else just let me know and…

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

Hey Brian! I'll start out by confirming that both the Draw-Tite item #DT94YR and our etrailer item #e25TR hitches fit the 2024 Subaru Outback Wilderness. The hitch pin hole sits 2" back from the edge of the bumper on the Draw-Tite item…