King Pin Center to Mounting Hole Measurements for Trail Air Air Ride King Pin # LC179879

Question

Question:

What is the measurement from the king pin to the 1st row of bolts? 2nd row of bolts? Thanks.

asked by: Scott L

0

Expert Reply:

On the Lippert Trailair Air Ride 5th Wheel King Pin, # LC179879, king pin center to the first row of mounting bolt holes measures 9 inches, center king pin to last row of mounting bolt holes measures 16-7/8 inches.

If you look at the diagram I provided, you can see the other relevant measurements for this replacement king pin.

expert reply by: Mike L

0

click to enlarge

Answer 1

Hey John! The Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY37ND is not Lippert approved yet. This is designed to replace a pin box with a Lippert Rhino bolt pattern, and is the same exact length as the factory pin box. Gen-Y does stand behind…

view full answer...

Answer 2

Hey Steve, It looks like you may need an offset gooseneck ball to give you more clearance in the rear, and give you some lift off of the bed. WE do have a 4" offset for that B and W gooseneck hitch #BWGNXA4685. That will move it back to give you…

view full answer...

Answer 3

The Trailair Air Ride 5th Wheel Pin Box - Lippert 1116 - 21,000lbs Item #LC155943 has two different placements when installing but as you can see in the attached dimension spreadsheets it has an overall height of 17-7/16" whereas the Trailair…

view full answer...

Answer 4

Louie, Yes, that is a great question. You do not have to worry about the air bags interfering with your B&W Turnoverball hitch setup. The Firestone Ride-Rite Air Bags with Easy Mount Compressor and In-Cab Control #F84XV are compatible with in-bed…

view full answer...

Answer 5

The Mopar M20 hitch you referenced is a Curt hitch, so to use it on your 2019 Chevy HD with puck system you will need the Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package - 25,000 lbs #C16025 if you have an 8 foot bed. These legs will…

view full answer...

Answer 6

Hey Clarendon, you're on the right track. You’re not wrong in how you’re thinking about this. You’re coming off a Flex Air, which is about as good as it gets for ride quality, especially paired with a B&W Companion. That rotating head plus…

view full answer...

Answer 7

For the Curt Rota-Flex 5th Wheel Pin Box #LC176440, Curt recommends to reuse the old hardware that was removed from the original pin box, unless they are damaged or unusable. The torque spec is dictated by the type of bolt that is used along with the…

view full answer...

Answer 8

Hey Richard. The EcoHitch Hidden Front Hitch item #EH79CR will definitely support a 542 lbs motorcycle. It has a 1,000 lbs total capacity no matter how you use it. Unless you have the lightest motorcycle carrier ever, it's not going to work with…

view full answer...

Answer 9

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

King Pin Center to Mounting Hole Measurements for Trail Air Air Ride King Pin # LC179879

Product Page this Question was Asked From

Continue Researching