Redline Hangers for Raising the Height of 5th Wheel Camper
Published 11/09/2021 >
Question:
I have a 2007 Forest River Cherokee lite 5th wheel camper, and I need to raise it about 4 inches to get it level when hooked to my pickup. I currently have 2 inch hangers on the unit, and the springs are on top of the axels. I see you have a 5 7/16 inch hanger but the hole is 3/4 and I need 9/16. Thank you for your help
asked by: Dave A
Expert Reply:
The tallest spring hangers we have in a 9/16 eye diameter are the Redline item # E4139 you were looking at. If you want to go to the 5 7/16 inch hanger you were referencing you will need to upgrade to 3/4 eye diameter leaf springs. If you decide to upgrade your leaf springs to use the taller hanger please email me and I would be happy to make a recommendation.
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 4-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- Redline
more information >
Continue Researching
- Search Results: cre3000
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: Checking Out the Front/Center/Rear Hanger for Double-Eye Springs
- Q&A: Best Suspension Upgrade Between MORryde, Equa-Flex, and Road Armor for Tandem Axle Trailer
- Search Results: leaf spring hangers
- Search Results: leaf spring brackets
- Search Results: hangers
- Video: Review of the Replacement Wet Shoulder Bolt
- Video: Let’s Check Out the Replacement Wet Shoulder Bolt
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: Center Hanger for Double-Eye Springs - 5-7/16" Tall - 3/4" Bolt Hole
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 2-15/16" - Qty 1
- Shop: Front Hanger for 1-7/8" Wide Slipper Springs - 3-7/8" Tall - 9/16" Bolt Hole
- Shop: Rear Hanger for 2" Wide Slipper Springs - 5-1/4" Tall - 5/16" Bolt Hole
- Q&A: Lift Kit Adding 2" For 1-3/4" Square Axle 5x8 Trailer.
- Q&A: Replacement Equalizers and Shackle Straps for 2007 Keystone Raptor 3712
- Q&A: Shorter Equalizer Solution for Trailer Where One Side of Equalizer Hits Frame
- Q&A: How To Deal With Axle U-Bolts Making Contact With The Frame Of A Trailer
- Q&A: Recommended 5,000+ lbs Capacity Axle w/ a 95" Hub Face and 80" Spring Seat Measurements
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacing American CS6000XL in Camper
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Spring Towing Readiness Checklist
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams




