Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey, Brent. Thanks for sharing the GVWR and hitch weight. Based on that information, yes, the Weigh Safe True Tow Weight Distribution Hitch part #WS49MR will work for your setup. One thing to keep in mind is that the 1,400 lb hitch weight rating does…
view full answer...Yes, you absolutely can use the SumoSprings Solo Custom Helper Springs Item #SSR-307-47 with a weight distribution system. Those springs were designed for exactly the type of issue you are encountering. These will keep your 2019 Ram 1500 Classic…
view full answer...Yes, this is normal. The Timbrens will engage first when you hook up the trailer and the weight distribution hitch will then work with the remaining sag. Just make sure you're not overloading your truck's tongue weight capacity and the weight…
view full answer...Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…
view full answer...The best way to reduce vehicle sag and trailer sway would entail the use of a weight distribution system. A weight distribution system works by distributing the weight on the rear axle of the tow vehicle across the entire platform. This will allow…
view full answer...Hey Mark, B and W recommends that your trailer be level side to side and totally straight when connecting to the B and W Continuum part #BW78FR. I would assume there's a little bit of wiggle room with that but nothing significant. Are you…
view full answer...That is definitely a feature which worries me about the B&W Continuum Weight Distribution System #BW78FR. While there is not a specific measurement I can give you as the bars move up and down depending on the load placed on the bars, B&W…
view full answer...Hello Craig, I am sorry to hear that your first time pulling your 2023 Cougar 26RBS was not enjoyable. With any WDH is making sure you are using the correct spring bars. You can figure out which ones you need by determining your loaded tongue weight.…
view full answer...The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…
view full answer...It's pretty easy to pick out the correct SumoSprings Trailer Helper Springs. There are only two things you need to know, the axle capacity and the spring orientation. The axle capacity is on the axle tag which is a sticker in the center of the…
view full answer...I do have a solution, but there are no handrails made specifically for the Lippert SolidStep RV Steps #LC791573. My recommendation is to install the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR. This rail is 54" long and is going to…
view full answer...The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…
view full answer...
Filters
