Search: thule evolution hinge   >  

You can do a quick check of the hinges you have on your older Thule cargo box. I have attached a photo you can use as a guide. If you open the box and look at the inner part of the large arm and it has a White piece near the pivot point, the…

We do offer the Thule #TH14936 replacement hinge. Typically if one hitch fails, the other will before too long, so it wouldn't be a bad idea to replace both or at least keep an extra on hand as a spare.

The difference between the Thule hinges or struts #TH14936 and #TH14933 is the spring tension. Both of these hinges will work for your Sears X Cargo Sport 20 lid. However, the #TH14936 includes better springs.

Since we know the Odin roof boxes are rebranded Thule boxes the lid lifter you are looking for is the part #TH14936 that you referenced.

Ouch! The ball joint plate on your Thule Atlantis 1600 is not something that's available as a replacement part, so I'd try some epoxy/JBweld to re-attach it, or else you'll have to fabricate a way to keep the lid closed on that side.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…