Search: refrigerator shelves   >  

The replacement glass cover for your Furrion 2-in-1 Range Oven is part #C-FSRE21SA-SS-003. This is compatible with the 17" ovens #FSRE17SABL and #FSRE17SASS as well as the 21" oven #FSRE21SABL.

This is a great question but what typically happens is that the glass develops tiny micro cracks that develop from hitting the glass several times combined with continual heating and cooling of the stress fractures which eventually leads to the glass…

Some of this is dependent upon the amount of space you have or are willing to modify as well as budget, but the Furrion RV Soundbar w/ Bluetooth #FSB2N25MCBL is a great option to pair with your 50" Jensen LED RV TV JE5015. Sound bar speakers and…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your trailer using…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

On this page (typically below the product links) there is a helpful link section that will have the install instructions fo the Hopkins Breakaway kit part #20400 that you referenced. I also attached an install video that shows the kit installed as…