Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…
view full answer...Hi Riley, Both Air Lift and Firestone transitioned to no longer offering the replacement brackets because people were purchasing the wrong ones constantly and it was causing a confusion and issues. It was also more expensive to purchase every single…
view full answer...I recommend disconnecting 12V electrical power from the main system control panel for a few minutes. Usually about 15-minutes without power does it. Once reconnected to power if you still have error codes, such as "Out-of-Stroke", to clear…
view full answer...Hey Gregory, thanks for reaching out! I really like the etrailer Trailer Hitch Receiver #e55ZR as well - I know you'll be happy with it! When it comes to wiring, a 4-Way is used for basic trailer lighting, but since you'll be towing a trailer…
view full answer...Hey Paul, thanks for reaching out. There could be a few things causing this. One thing could be your batteries are simply low. Make sure they are fully charged and make sure your terminal connections and good tight and clean. You will also want to…
view full answer...Hey Michael, you would need a DC to DC charger that has a lithium profile like the Dometic PerfectPower charger part #GP95QR. Lithium batteries need a very specific voltage to get charged so this will make sure the voltage is correct and it has…
view full answer...Hey Michael, The Hydraulic Line Kit for Torsion Axles - Used with 9504 or 9505 #80910 is a specific-fit hydraulic line. There are a variety of other options available if you're just trying to run a flexible line from your hardline to the caliper.…
view full answer...The 1' Brake Hose #DE56GR is going to be the closest we have to a fitting with male ends on both sides. This has the 3/16" male inverted flare fittings on both sides.
view full answer...Most axles rated at 3,500 lbs will have the inner bearing, part #L68149, and the outer bearing, part #L44649. This is something you can check. The bearings and seals have numbers. They are actually engraved on the bearings and the seals. If you are…
view full answer...According to the information I could find on your 2022 Grand Design 2500RL it comes with 3,500LB Dexter axles. This will use the Grease Seals #RG06-050 for one axle. We also have the Bearing Kit #BK2-100 which includes the bearings, races, and grease…
view full answer...Hello Ric, I’m sorry, but I’m not showing that there is a vehicle-specific pigtail available for your 2013 Sierra 1500. You would need to splice in the brake controller. The Tekonsha Primus IQ Trailer Brake Controller - Up to 3 Axles - Proportional…
view full answer...Hello Jean, That’s a great question, and I completely understand why you’re asking. When you’re mixing brands like Dometic and Solera, the last thing you want is a 15-foot roller bar that almost fits and leaves you stuck with unexpected installation…
view full answer...