Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Titan Chain #TC2536 is the correct fit for 315/70R17 tires, but not for off-roading as those chains are on-road only. For tire chains that do fit that size tire and is rated for both on-road and off-road use you'll need a different chain: -…
view full answer...To add a set of Pewag tire chains to your Jeep Wrangler's 315/70-R17 tires you will want the pewag Wide Base Tire Chains item #PW94FR. These have square links and a zig zag pattern that will give you traction in deep snow, mud, gravel, and ice.…
view full answer...For the front axle of a truck like yours with the tire size 33x12.50-20 I would recommend the pewag Starwave Chains part #PW94FR which uses a zig zag pattern for the chain links which allows it to provide better traction around corners.
view full answer...Off-road chains are built to be stronger as they will be subjected to more stress than a tire chain for on-road use only. The chains will also use larger links so to provide better traction off-road. The v-link chains like the Titan Chain Snow Tire…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
view full answer...According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
view full answer...Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…
view full answer...Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…
view full answer...Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…
view full answer...