What Torque Should Be Used For U-Bolt Nuts On Trailer Suspension
Updated 02/06/2025 | Published 04/30/2017 >
Question:
Hello, I am changing the leaf springs on my boat trailer. When I tighten down the u-bolts, is there a foot pound number I should tighten them down to?
asked by: Lenny B
Helpful Expert Reply:
If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs.
If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

Anthony
2/4/2025
I have a 10000 dual axles i realigned the axles put new hangers and equalizer im wound what are the inch pounds they get torqued down too



Product Page this Question was Asked From
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4-1/4 Inch Long
- Dexter
more information >
Continue Researching
- Search Results: trailer suspension parts
- Search Results: trailer leaf springs
- Search Results: leaf spring shackle kit
- Shop: Trailer Hitch
- Search Results: leaf spring
- Shop: Trailer Wiring
- Search Results: fender
- Search Results: 248744
- Search Results: road armor equalizer
- Video: How To Choose Camper Leaf Springs
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: Lippert U-Bolt and Nut Kit for 4,400-lb Trailer Axles - 3" Wide
- Shop: Lippert U-Bolt and Nut Kit for 2,200-lb Trailer Axles - 1-3/4" Wide
- Shop: Lippert U-Bolt and Nut Kit for 3,500-lb Trailer Axles - 2-3/8" Wide
- Shop: Lippert U-Bolt and Nut Kit for 10,000-lb to 16,000-lb Trailer Axles - 5" Wide
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Q&A: U-Bolt Torque Recommendation for 1/2 inch Diameter On Trailer Suspension
- Q&A: Replacement Leaf Springs for a Trailer w/ Hangers 26-1/4" Apart and a 3,500 lbs Axle
- Shop: Suspension Enhancement
- Q&A: Can 3500 lb Leaf Springs Be Upgraded to Heavier Duty for a 2020 Grand Design Imagine 2400BH
- Video: Hands-On with the U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles
- Video: Let’s Check Out the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles
- Video: Setting up the Curt Trailer Hitch Receiver on a 2007 Ford Van
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer
- Q&A: Replacement 26-1/4 Leaf Springs for Trailer with 3,500 Lb Axle
- Video: In-Depth Review of the 3" Round Trailer U-Bolts 9/16" Diameter (Qty 2)
- Q&A: Amperage of Brake Magnets and Size of Wire Used To Connect 7-Way Trailer Plug To Electric Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Review of DeeMaxx Trailer Hubs and Drums - Galvanized Trailer Idler Hub 6000lb Axle - DE29NR


Dave
9/27/2024
Jeffery Hi, I need to re-align the bunks on our boat trailer and need to know if this also applies to the U-bolts for bunk brackets? Mine as 3/8" U-bolts with a nut and washer on each end of the bunk U-shaped bunk bracket bolt. Given bolt diameter I assume the correct approximate torque is 30 - 50 or around 40 foot pounds of torque. Though I'm uncertain of the threads per inch on this bolt and it appears they are zinc plated galvanized bolts not stainless steel. Thanks Dave