Search: goose neck hitches   >  

Your 2018 Grand Design Reflection 150 has a Lippert 1621 style pivoting pin box which is the Sidewinder/Revolution part #RP34FR. If you wanted to replace that with the 5th Airborne part #RP78FR you mentioned this would be the correct fit.

To use your Signature Series fifth wheel hitch with the Elite Series under-bed rails, you will need the Signature Series Hitch Adapter, #RP58419. If your Signature Series hitch uses a slider, then you will not need to use the handles in this kit,…

Gooseneck ball #19310 is a replacement for several discontinued hitches as well as gooseneck plate #RP58079. It is held in with a snap ring #30556. Which adapter do you have? I may be able to determine if this or another ball will fit.

In order to choose the correct Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter you'll need to first know which model pin box you have (1621, 1116, 1716 etc.) and then the weight capacity of the existing pin box. The part…

The extended notation you have mentioned for the Lippert 1621 5th Wheel Pin Box part #LC1387883 is in regards to the style. This is also know as the "long" style and there are several other pin boxes with this style that have…

A slider hitch isn't needed with an 8 foot bed truck, but it doesn't hurt anything to use one though. Only downside is that it's going to weigh more than a stationary hitch really.

Your 2012 Forest River XLR I believe has a 1621 pin box. You can confirm this by looking at the stickers on your current pin box or measuring the bolts as shown in the attached article. The Reese Goose Box Fifth-Wheel-to-Gooseneck Adapter #RP85FR is…

For all intents and purposes there is no difference between the Lippert 1621SHD part #LC1387882 and the Lippert 1621 #LC1387883.

We offer the Reese 9485 as our own unique part number, #DT89MR, as well as the Curt #C60633 or the B&W #BWGNRK1320 which will all fit. If I personally had to choose between the two, I'd go with the B&W because I prefer the side-latch…

Yes, there is only one type of 7-way blade connector. I am attaching a help article about wiring that may be of interest to you.

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

Bearings fit pretty tight onto spindles. There basically should be no play at all between the inner portion of the bearing and the spindle. They don't fit so tight that they would have to be pressed on, but they sometimes can be tight enough that…