Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The top step of the Folding Step Stool #PT36NJ that you referenced is 17-1/2 inches tall.
view full answer...The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…
view full answer...The Manual Pull Out Steps part #SMFP-2100 that you mentioned are going to fit your 2011 Palomino Puma 27KFQ only when you use the Lippert Outriggers for Manual RV Steps #LC301704. If you need a smaller step you can use #SMFP-2120 instead. The…
view full answer...I recommend the NOCO Commercial Grade battery box part #329-HM484 to hold both of the group 24 batteries. From my research a group 24- 12 volt battery measures 10.25" long x 6.8125" wide x 8.875" tall. This battery box measures…
view full answer...A camper step assembly needs to mount to a surface strong enough to support its weight load plus that of a person (or beloved pooch) on the step. Usually this mounting point will be a structural element or a frame member. If you can see behind the…
view full answer...I went out to our warehouse to take a few measurements on the mounting bracket for the Brophy Camper Scissor Steps #AS24. The base bracket profile measures 24 inches long, 1 inch tall, and 1 inch deep. The shorter tabs that will be closer against the…
view full answer...Yes, you can use the Flint Hill Goods Hitch Mounted Aluminum Cargo Carrier #FHG59ZR with your front mount hitch on your 2011 GMC Sierra. There will be a few things you should be aware of though. A loaded cargo carrier can reduce driver visibility,…
view full answer...The anchor plates that fit into Yakima roof tracks are the part #Y8810074 which is 3/4 inches wide. This is the same width as the anchor bolts of the #Y01162 which is designed to fit Yakima crossbar top channels. So the #Y01162 would work well…
view full answer...We don't have an install picture but what I can do is describe it. The portion of the #LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of…
view full answer...Wider steps can be installed on RVs but what you'll have to do most likely is remove the old brackets that steps used and install new Outriggers like part #LC301704 to give the new steps something they can attach to.
view full answer...The closest RV step we offer to 27 inches in width is the Flexco triple step #SMFP-3200L that measures 27-1/8 inches in total width. You might need the outriggers part #LC301704 to move the brackets out to install the steps if yours is 27 inches…
view full answer...The TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLD1112-30 does come with the dual receivers so you will have to remove the factory hitch from your 2020 Ram 2500 for this install. I reached out to my contact at TorkLift to confirm this and he…
view full answer...Filter Your Search
Contact and Help