bing tracking image
  1. RV and Camper Steps
  2. Lippert
  3. 3 Steps
  4. Pull-Out Step
  5. Towable Camper
  6. 25 Inch Wide Step
Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs

Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs

Item # LC432690
Our Price: $229.78
RV and Camper Steps
This item qualifies for Free Shipping
Shipping Weight: 61 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right for you? Product Expert Kathleen M says:

Yes, if you:

  • Are tired of dealing with overly complicated steps and just want something simple that bolts in place
  • Often spend time in rainy or muddy places where a little extra grip tape can help you keep your footing
  • Have an entry height (distance from the ground to the mounting point) of 31" - 34" and a mounting place that's at least 27-1/2" x 12"

No, if you:

  • Get annoyed when you have to supply your own hardware and want everything you need in the box
  • Have bad knees and need something with less space between the steps for easier climbing
  • Hate having to do maintenance, like replacing worn grip tape or touching up paint
This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat. Great Prices for the best rv and camper steps from Lippert. Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs part number LC432690 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (449)
  • Q & A (0)
  • Photos
  • Why etrailer?

Lippert RV and Camper Steps - LC432690

  • 3 Steps
  • Pull-Out Step
  • Towable Camper
  • 25 Inch Wide Step
  • Lippert
  • 27-1/2 Inch Wide
  • Steel
  • 9 Inch Drop/Rise
  • No Ground Contact

This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.


  • Manually operated RV steps make it easy to get into and out of your motor home
    • Simply pull steps out for use and position back in place for travel
  • Non-skid and slip-resistant step design
    • Tread tape provides sure footing
    • Water channels and drain holes help to keep rain from pooling
  • Grab handle eases use and keeps hands clear of moving parts
  • Black powder coated steel is sturdy and rust resistant
  • Easy bolt-on or weld-on installation
    • Mounts to RV frame in same manner as original step


  • Entry height: 31" - 34"
  • Step dimensions: 25-1/2" wide x 8-1/4" deep
  • Mounting bracket dimensions: 27-1/2" wide x 16" tall x 12" deep
  • Drop/Rise: 9"
  • Weight capacity: 300 lbs
  • 1-Year warranty

Lippert 690 Step Dims

Lippert 690 step dims 2

Lippert 690 Step dims 3

Will Lippert Pull-Out Steps Work for You?

Pull-out steps are typically installed on travel trailers. The pull-out steps from Lippert are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.

Lippert Manual Mounting

The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 27-1/2" wide and 12" deep.

If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 25-1/2" wide to 28" wide. A full list of the available steps is below.

RV Steps Outriggers

Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.

Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.

How Many Steps Do You Need?

Lippert Manual Entry Height

To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 9" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.

The chart below displays entry height measurements in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 25-3/4" mounting bracket, the step part numbers with that width are in the third column. The steps for 27-1/2" mounting bracket widths are in the fourth column, and the steps for 28" mounting bracket widths are in the fifth column. Choose the bracket size that is closest to your measurements without going over.

This page's step assembly is in bold text.

Entry Height25-1/2" Mounting Bracket Width25-3/4" Mounting Bracket Width27-1/2" Mounting Bracket Width28" Mounting Bracket Width
14-1/4" - 17-1/4"Not availableLC432678Not availableNot available
21-1/2" - 24-1/2"LC432682Not availableNot availableNot available
24-1/2" - 27-1/2"Not availableNot availableLC432687Not available
31" - 34"Not availableNot availableLC432696, LC432690Not available
36-3/4" - 39-3/4"Not availableNot availableNot availableLC432698

How Do You Install the Steps?

To install the steps:

  1. Make sure the camper is level on flat ground
  2. Lift the steps into the mounting space and prop into place
  3. If needed, mark the mounting holes on the camper and drill

    -Set aside steps before drilling

  4. If needed, install the outriggers
  5. Align step mounting holes and secure in place with bolts and flange lock nuts

    -Make sure the bracket is backed up fully against the I-beam on the chassis

    -Hardware not included

  6. Tighten hardware until snug
  7. Make sure assembly is sitting square and level
  8. Torque the hardware to 20 ft-lbs

432690 Lippert Components (LCI) Triple Radius Entry Step

Similar to Hickory Springs 993240RFXWC2

Customer Satisfaction Score:

Customer Reviews

Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs - LC432690

Average Customer Rating:  4.8 out of 5 stars   (449 Customer Reviews)

This 8-1/4" deep, triple pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.


I received my order quickly but the box was damaged and some paint on the steps was damaged. I informed etrailer and they issued me a small credit to buy some paint. The steps fit my fifth wheel perfectly but they are definitely a lighter guage of metal tham my original steps. The installation was not difficult and the fit was excellent so I would recommend this company


Perfect replacement steps for my OEM steps that got damaged beyond repair. High quality just like the original...mounting holes lined up perfectly. An absolutely outstanding purchase experience with I was pleasantly surprised how fast I received them. Order placed on 6/26...shipped on 6/28...delivered on 6/30. The entire experience far exceeded my expectations.


Perfect fit- fast shipping. I couldn’t be more pleased with how smooth this experience went. If you ever find yourself in a situation where you forget to fold your steps and rip them off, e trailer will help you to forget it ever happened. Thanks


Bolted right up , sturdy steps ,looks g reat


One year later and the steps are still working great! Perfect fit and replacement, just remember to take care of it for what it is, basically an item exposed to all the elements and will catch the road dirt and grime your tires may kick up. Wash it down occasionally and keep the pivot points lubed with a dry lubricant so it doesn't collect dirt and grime and it should serve you well.


Works as identical to original steps on RV, which is what I wanted. Easy bolt on installation. Extremely happy with product.


I stupidly backed my wife's car into the steps of our 5th wheel, damaging them. I looked on-line and found a replacement for the steps, perfectly described and with measurements and pictures so I knew they were the right ones. And at a great price, less than that big box Camping place - with free shipping. I ordered them and promptly got an email from George J. in customer service advising that the order had been received and shipped, giving me a tracking link and his own email address and a phone number to contact him with any questions. The steps arrived in perfect condition within 6 days at which time I received another email from Carol C. advising that the steps had been reported as delivered and to contact her with any questions, giving her email and phone number. Now this is great customer service!! And I have beautiful new entry steps too.


We could not be more pleased with our steps! They are well built and the fold-up (and easy pull-down) feature is a must for our use. Great customer service, we were surprised at how quickly we received our order. We would gladly do business with these folks again!

Our Lippert pull-out steps have been in use for one year and they are still going strong! We could not be more pleased with them!
Susan U - 07/23/2019


Original steps got bent, and these were a direct replacement from original supplier to trailer mfr. great price and great service from etrailer.


These steps operate much easier than the original ones that came with the trailer. They are well made - good quality steps!
It took me about 3.0 hours to install the steps. I did not order the outriggers so I used the old brackets off of my original steps. To remove the old bracket from my existing steps, I used a disk grinder to grind off the head of the pin. I drilled/enlarged the exiting holes (six total) in the new steps to 3/8 inch to match the size of the bolts that secured the existing steps. Attached are pictures of the brackets that I removed from my existing steps and the bracket complete installation.


I think your service is outstanding to bad other companys are not the same


Timely shipping, Perfect fit!


Right item, Good shape, easy installation and was delivered much sooner than expected. Good Job


Very professional very prompt and quality service and product. On time and quick delivery. I would recommend them to anyone looking for some camper steps.


Sizing was accurate, solidly made replacement unit. Quick delivery, competitive pricing.


Great product, easy to install. Price reasonable. I removed the old broken stairs andd installed the new ones in just 2 hours and I am not real mechanical. My only suggestion would be to includethe hardware (nuts & bolts).


Exactly what I wanted. Very quick shipp ing


Great products, great pricing and fast shipping. Thanks


The new stairs we received is really good quality


Everything was good from ordering, shipping, to use alls well


You guys a amazing, bought it Saturday, received it Tuesday, that’s what I like! and it’s factory fit! After I did the screw up, and bent the steps I didn’t think I could get some steps in Time for my next trip, Thanks!

The steps are great, I think they’ll last many years!
Mike - 08/28/2019


always nice to have a company to rely o n!


I received my set of steps for our 5th wheel they were a perfect match for replacement everything lined up and bolted together easily the only thing I would recommend is supplying the carriage bolts with the steps thank you very much

Great working and holding up well
Brian - 06/30/2019


The steps we purchased replaced our old ones perfectly. They are a little lighter weight than the old ones and a little lower to the ground, but we find that is better for us.

The steps have held up well and we are very happy with them.
Don F - 08/03/2021


Got here quick, fit perfectly, use carriage bolts only, unless your using a floor jack, you will need 2 people to install for ease. Works well,I could have gotten the 2 step instead, double check all of you heights. Excellent product and price.

After a year, the step is still holding up strong,. They make good products.
Ed & - 11/13/2020

Show More Reviews

See what our Experts say about this Lippert RV and Camper Steps

  • Can the Lippert Manual Pull-Out Step Be Taken Apart and Re-Painted
    There aren't instructions for the Lippert Manual Pull-Out Steps # LC432690 to be disassembled, but there isn't any reason why you couldn't take them apart for re-painting. It does look like some of the parts are riveted and not bolted, so you may not be able to completely disassemble.
    view full answer...
  • Can the Lippert Manual Pull-Out Step for RVs LC432690 Be Used To Replace 24" Wide Steps
    In regards to selecting the correct set of pull-out steps for a trailer, the most important dimensions to verify are mounting bracket width and entry height. If these two metrics are correct then you need not worry about the step width although this is correlated to the mounting bracket width. The Lippert Manual Pull-Out Step for RVs part # LC432690 has a 27-1/2" wide mounting brackets with an entry height of 25" so if these both work for you then the step width of 25-1/2" won't matter.
    view full answer...
  • Will Lippert Manual Pull-Out Step LC432690 Fit StarCraft 14RT Pop Up
    If the mounting bracket width you have is 25.5 inches like you mentioned the # LC432690 that you referenced would be what you'd need. This would match up to that perfectly and would put the lowest step 25 inches from the RV frame.
    view full answer...
  • Mounting Measurements for Lippert Manual Pull-Out Step LC432690
    For Lippert Manual Pull-Out Step # LC432690 the mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. The side plates are 16 inches tall. I have included some pictures with these and other measurements.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Lippert Triple Pull Out/Manual RV Steps
    It is likely that the steps you have are the exact same as the ones with the other part number that you found. What counts is the measurements specifically the side to side and front to back mounting hole spacing. For step set # LC432690 the holes are 26-3/8 inches on center side to side and 7 inches front to back.
    view full answer...
    Image 1 for
  • Recommended Replacement RV Steps That are 24 Inches Wide
    The closest pull-out steps we currently have available to match the steps you are replacing in your RV is the Lippert Manual Pull-Out Step for RVs # LC432690. This 3 Step product measures 24 inches wide with a 9 inch drop and the overall width of its mounting base is 27-1/2 inches. The primary mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. I have attached an image that shows these dimensions more clearly. These are very nice...
    view full answer...
    Image 1 for
  • Will Lippert Manual Pull Out steps part # LC432690 Attach to OutRiggers with Vertical Mounts
    The Lippert Manual Pull Out steps part # LC432690 that you referenced is designed to fit the outriggers you have on your trailer. Most RV steps attach to the mounting brackets on the sides like this so what you have is pretty normal. As long as your outriggers are 27-1/2 inches between them then this will fit and work well.
    view full answer...
  • How Much Does the Lippert Manual Pull-Out Step for RVs # LC432690 Weigh
    The shipping weight of the Lippert Manual Pull-Out Step for RVs # LC432690 that you referenced is 60 lbs. If we knock off a few pounds for the packaging that will leave you with about 57 lbs.
    view full answer...
  • Replacement Manual 3-Step Assembly for 2011 KZ Sportsmen 290 Travel Trailer
    We carry a wide range of replacement RV and trailer step assemblies and these are offered in several sizes and step counts. Based on my research the 2011 KZ Sportsmen 290 travel trailer comes fitted with a 3-step manual unit, one like # LC432690 from Lippert. You can view all of our RV 3-step options on the linked page. The dimensions you provided are useful but the key is to match up the mounting hole spacing. The step unit I referenced has mounting base dimensions of 27-1/2 wide x 9-1/2...
    view full answer...
    Image 1 for
  • What Gauge Steel Is The Lippert Components Triple Radius Entry Step Constructed From
    The Lippert Manual Pull-Out Step for RVs, # LC432690 is constructed from 8 gauge steel.
    view full answer...
  • Could Manual Pull-Out Steps # LC432690 Fit 2010 Grey Wolf Super Lite
    The Manual Pull-Out Steps # LC432690 are designed to fit the standard mounting brackets found on RVs like your 2010 Grey Wolf Super Lite by Cherokee. That said, there are sometimes variances in the widths of the brackets typically based on the number of steps on the assembly. This setup is designed to fit mounting bracket dimensions that are 27-1/2 inches wide outside to outside. Most likely that's what you have but worst case scenario you could weld these directly to your frame, have the...
    view full answer...
  • Triple Steps that Can Fit 2010 Forest River Georgetown
    The great thing about RV steps like the triple step part # LC432690 is that they are universal enough in how they install that they can basically be made to fit any RV including your 2010 Forest River Georgetown. At worst you might have to move the mounting hardware you have now or have these steps welded in place but they will fit your motorhome. If you wanted to install new mounting brackets you'd then need the part # LC301704.
    view full answer...
  • Will Manual Pull-Out Steps # LC432690 Fit 2008 Jayco Jay Flight 30 BHS
    Yes, the Manual Pull-Out Steps # LC432690 that you referenced will fit your 2008 Jayco JayFlight 30 BHS. The great thing about RV steps is that they can basically fit any RV since the install brackets can be moved, the steps can be welded directly to the RV, or you can install new brackets with the Outriggers # LC301704.
    view full answer...
  • Which Lippert Manual Pull-Out Step Is Correct for a 32 Inch Entry Height
    The Lippert Manual Pull-Out Step for RVs part # LC432690 which is a triple step option would be best for an entry height of 32". The distance from the top of the mounting bracket to the bottom of the step is 25" therefore you will only have 7" from the ground to the first step which is perfect. Please note, you do need to verify the mounting bracket width is 27-1/2" which is pretty standard.
    view full answer...
  • Recommended Pull Out Steps For A 2017 Coachmen Apex 275BHSS
    Based on the measurements you provided me the Lippert Manual Pull-Out Step for RVs # LC432690 would not fit the entry height of your camper so instead you'll need the Lippert Manual Pull-Out Step for RVs # LC432687. These steps can easily bolt right up into your frame and has a rust-resistant black powder coating.
    view full answer...
  • How to Determine if Lippert Triple Pull-Out Steps Fit Trailer
    The Lippert Manual Pull-Out Step for RVs - Triple # LC432690 might work for your Keystone trailer, but we do not have a database of each part put on each year, make and model of trailer. To find out if these steps will work, you are going to need to measure where your bolt hole centers are and ensure you have enough room for the mounting bracket to fit. These steps have mounting bracket dimensions of 27-1/2" wide x 16" tall x 12" deep. Otherwise, you will need to use the Outriggers for...
    view full answer...
  • Will Lippert LC43290 Pull Out Steps fit 2006 Keystone Outback 30 ft
    For your Keystone the step part # LC432690 will fit but it may require some fabrication. It sounds like your steps use different mounting dimensions that these so what you would need is new outriggers part # LC301704 as well so that you can install compatible mounting brackets.
    view full answer...
  • How to Select Replacement RV Pull Out Entrance Steps for Forest River Salem
    Trailer and other RV makers do not maintain specs on smaller items like the steps they install on their RVs but it is not difficult to find replacements based on size. The linked page displays RV and camper steps that are offered in many types. For instance if you wanted a 2-step manual pull-out type you will simply click on those two features to then see all such steps. The just match your step width. For instance, Lippert 2-step manual pull-out step # LC432682 has a mounting base that...
    view full answer...
  • Pull Out Step Recommendation for Horse Trailer That Has 26 inch Tall Height
    The best option would be a fold out step setup for your horse trailer where you need a height of 26 inches. The Lippert manual pull out step part # LC432690 would be a fantastic option. When it's out you have 25 inches from the mounting bracket to the bottom step. To mount these you'll also want the outriggers part # LC301704.
    view full answer...
    Image 1 for
  • RV Step Mounting Measurements to Confirm a Fit and Work Around Option
    Do you need the mounting base to be 26 inches wide, or the mounting hole locations 26 wide? If this is just an approximation, we have the Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop/Rise - 24" Wide - Steel - 300 lbs # LC432690 that have a mounting base of 27-1/2 inches wide with mounting holes at 26-3/8 inches. If you can't find the exact mounting hole locations, then I recommend the Lippert Outriggers for Manual RV Steps # LC301704 These will allow you to change the mounting...
    view full answer...
  • RV Steps for a 2016 Forest River Vengeance for a Width of 27-1/2"
    The steps that I recommend are the SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames # LC791572. These manually operated RV steps make it easy to get into and out of your 5th wheel, they simply fold down for use and fold back up for travel. The leg extensions create a sturdy connection with the ground to eliminate bounce to reduce the potential for slipping or falling during use. They remain stable on uneven terrain since the legs adjust individually to keep the steps parallel. These...
    view full answer...
  • Replacement Pull Out 3-Step Recommendation for 2017 Grand Design 303RLS
    I pulled up pictures of your Grand Design 303RLS and it looks to have a pull out style 3-step on it so for a replacement that will be as cost-effective as possible the part # LC432690 would be what you'd want. This can either bolt or weld to the frame of your trailer. If your outriggers are 25.5 inches apart you'd have to move them out 2 inches for these to bolt in their place.
    view full answer...
  • Is There a 3 Step RV Pull Out Step that Can Replace LC432682
    There are 3 step pull out kits similar to the # LC432682 that you referenced but they are wider across the board so the exact mounting hardware you are using now won't work. The part # LC432690 would be a great solution for what you have but it's 27-1/2 inches wide and what you have now is 2 inches narrower. For new brackets you'd also want the part # LC301704.
    view full answer...
  • Can Electric Motorhome Step Be Replaced By 3-Step Manual Step
    You absolutely can replace powered RV steps with manual steps to save yourself the headaches of wiring issues, bad motors and also to reduce the number of devices that put demands on your motorhome's power system. Our range of 3-step manual pull-out steps is shown on the linked page. Motorhomes typically use a 24-inch size step but we do also have a 25-inch model # LC432690. What you'll want to do is measure the size of the mounting bracket on your original part. For a great value I really...
    view full answer...

< Previous

Do you have a question about this RV and Camper Step?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Leah B
Updated by:
Leah B
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Halie H
Updated by:
Halie H
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Chelsea B
Written by:
Chelsea B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.