Lippert RV and Camper Steps
- LC791573
- 3 Steps
- Towable Camper
- Fold-Down Step
- 24 Inch Wide Step
- Lippert
- 22-1/2 Inch Wide
- Aluminum
- 8 Inch Drop/Rise
- Ground Contact
Aluminum fold-down steps with 13" deep top step attach to the threshold of your RV. Designed to fit 29" to 36" wide doorways. Industry standard 8" drop/rise between steps. Adjustable legs keep the steps level on uneven ground.
Features:
- Manually operated RV steps make it easy to get into and out of your travel trailer or 5th wheel
- Simply fold down for use and fold back up for travel
- Steps lock in place and stow inside of entry door
- Keeps steps protected from the elements during travel
- Provides an alternative to installing them under the door
- Eliminates the need to cut into the metal skirting of your RV
- Leg extensions create a sturdy connection with the ground to eliminate bounce
- Reduces potential for slipping or falling during use
- Remains stable on uneven terrain - adjust legs individually to keep the steps parallel
- Adjusts in 1" increments for a total of 13" of adjustable length
- 3-Step assembly has an extra-deep top step for easy entry and exit
- Anti-slip design offers excellent traction
- Textured surface provides traction in wet or muddy conditions
- Rubber strips help to prevent slipping
- Kickplate prevents damage to RV sidewall and skirt
- Aluminum step platforms are rustproof
- Lightweight construction makes lifting and lowering the steps virtually effortless
- Powder coated steel frame is corrosion resistant
- Steps are pre-assembled to ease installation
- Mounting hardware included
Specs:
- Entry height: 27" - 36"
- Doorway width: 29" - 36"
- Bracket width range: 27-3/4" - 35-3/4"
- Step dimensions: 24" wide x 8-1/2" deep
- Mounting bracket dimensions: 22-1/2" wide x 10-1/2" tall x 6" deep
- Height in travel position: 56-1/4" tall
- Drop/Rise: 8"
- Weight capacity: 400 lbs
- 1-Year warranty
Will Lippert SolidSteps Work for You?
Fold-down steps are typically installed on travel trailers and some RVs. The fold-down steps from Lippert lift up to latch into your camper's doorway for storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
![SolidStep Door Flanges]()
The Lippert SolidSteps install inside your camper's doorframe. Measuring for this may seem tricky, but once you know what to look for, figuring out the right fit for your RV doorway is easy.
![SolidStep Door Flanges]()
Measure between the door frame flanges - the doorway width - to determine the step size that will fit into your camper's doorway. You will need a doorway that is at least 29" wide to 36" wide for these steps to work.
If it turns out you have a wider or narrower doorway, there are other step assemblies that fit doorways ranging from 24" wide to 36" wide. A full list of the available steps is below.
To make sure your doors will close when the steps are installed, measure from the top of the threshold plate to the bottom of the door. You will need a gap of about 1/4" to 3/8" to allow the door to close over the step's mounting plate.
The doorway threshold will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
![SolidStep Entry Height]()
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, and it will tell you how many steps you need.
The chart below displays doorway width measurements in the first column. If you determined you have an entry height between 22" and 28", the step part numbers that fit that height are in the second column. If you determined your entry height is between 27" and 36", the step part numbers that fit that height are in the third column. If you determined your entry height is between 35" and 44", the step part numbers that fit that height are in the fourth column. Choose the doorway width that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Doorway Width | 22" - 28" Entry Height | 27" - 36" Entry Height | 35" - 44" Entry Height |
|---|
| 24" | LC713662 | 698799 | Not available |
| 25" | LC733931 | LC791572 | LC791574 |
| 26" | LC733931 | LC791572 | LC791574, 678025 |
| 27" | LC733931 | LC791572 | LC791574 |
| 28" | LC733931 | LC791572 | LC791574 |
| 29" | LC733932 | LC791573 | LC791575 |
| 30" | LC733932 | LC791573 | LC791575 |
| 31" | LC733932 | LC791573 | LC791575 |
| 32" | LC733932 | LC791573 | LC791575, 678028 |
| 33" | LC733932 | LC791573 | LC791575 |
| 34" | LC733932 | LC791573 | LC791575, 678031 |
| 35" | LC733932 | LC791573 | LC791575 |
| 36" | LC733932 | LC791573 | LC791575 |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Place the mounting bracket into the camper doorway
- Extend until feet touch the ground
- Center the steps in the doorframe
- Slide assembly forward until firmly placed against outside threshold
- Install fasteners through the mounting holes into the camper floor
-Secure the hardware (not included) but dont tighten
- Lift the step assembly into the doorway and make sure the latching arm engages
-If necessary, loosen the bolts on the latching arm to adjust
- Tighten the latching arm bolts and the floor fasteners
791573 Lippert Components (LCI) Solid Step Camper/5th Wheel RV Stairs - 29"-36" Wide Door Frames - Triple Step - Aluminum
Replaces LC678041, LC678044 and LC678047
Installation Details 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.