Result: curved equalizer

Hello Robert, The kit you asked about will work. There are just a couple of things to consider: You currently have the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole #TREQ356, which measures 6…

Hi Travis; those look pretty flat so I don't think 26" would do it either. The 25-1/4" long #EM86RB you ordered will be a better fit. Completely flat these would have a similar measurement at just over 26" which is in line with…

Hey Stephen. All you should need to do to flip a 2" square axle is to use the CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles item #CE23103. You'll be able to reorientate your axle below your springs with this setup. This kit…

Hey Craig, thanks for reaching out! I believe the Optronics Fleet LED Trailer Tail Lights w/ Grommets #TLL12RK will work as replacements for your 2008 Featherlite 4926 trailer, but you'll need to confirm this on your end. These lights carry the…

For the hanger kit #APT5 with the leaf spring #e64SR you will want a distance of 29-1/2 inches between the hangers.

I recommend replacing your Atwood coupler with a Demco A-Frame Trailer Coupler #DM14791-97, as parts are virtually impossible to find for the older Atwood couplers. This will get you all new latch components that feature an EZ latch system. The…

The only repair option we have is total replacement with a coupler like the #CA-5210-B you were looking at. Unfortunately, we do not have a latch repair kit for this latch style.

According to my research the wiring for your 1997 Dodge Ram 2500 are for the following functions: Black/orange - Tail/Running Red/Tan - 12V Power Green/Red - Left Turn/Stop Brown/Pink - Right Turn/Stop Light Blue - Trailer Brake Purple/Black -…

The hangers of the part #APTT3 that you referenced are different heights because the center hangers attach to equalizers which then attach to shackles and then finally to the leaf springs. Since there are several components in this arrangement a…

The Stainless Steel Hex Lag Screw #FA74521 contains one 3/8" diameter, 1-1/4" long lag screw.

Spring Hanger location dimensions are normally figured by the manufacturer and provided with the spring hanger kit, that includes all of the parts for installing the springs on the trailer frame. I have provided a chart that shows the spring hanger…

Hello Jim, Great question! Because there is not a real standard to trailer suspension I do not have a direct answer for the spacing for the hangers to install the #e36FV. It all depends on what size shackle you are using, if the spring is over or…