Hey Craig, it sounds like you are asking if the Andersen Ultimate Connection part #AN67VR can be used in the bed of your 2025 GMC Sierra short bed that has the OEM rail kit. If so, yes it can but you will need to use the pop in ball adapter part…
Good morning, Ron! The Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AN67VR is compatible with your factory gooseneck hitch ball just as it is. The Adapter #AN27VR you're looking at just gives you a better connection than the…
No, I am sorry Dan it will not. The Weigh Safe Safe Load Ball and Anchor Kit item #WS74ZR is going to be too tall for a Anderson Ultimate 5th wheel hitch like item #AN77VR. You'll want to use either a regular gooseneck ball like item #C60692 or…
I sure can Mark and thanks for the information! The Dexter 3,900 lb torsion axles use the same bearings as 3,500 lb axles. Which means the correct replacement bearing kit is the item #BK2-100 you were looking at. You'll need one set per hub. Your…
We have just what you're looking for, the Putco Stainless Steel Tailgate Cap, part #P51617P. The cap is manufactured in the US, and carries a lifetime warranty. The cap installs using the included hardware.
The replacement brake drum you need is Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2, part #8-285-11UC3. The hydraulic brake shoes you need are the Replacement Brake Shoes for Dexter 12-1/4"…
You are 100% correct! The closest match and best option to upgrade your 7.50-16 LT bias ply tires, is going to be an ST235/85-16 radial tire, like the Kenda Karrier #AM32743B you were checking out. This tire is pre-mounted on a 16 inch diameter by 6…
Based on the measurements you have provided it sounds like you have pretty standard wheel studs. Kodiak stud #K12WB2 is nearly spot-on as far as the measurements. I have included a picture showing its measurements for you.
This Miro-Flex, Waterproof, Rectangular, LED Trailer Stop/Turn/Tail Light #STL35RB that you referenced should work well with your trailer wiring. You will need a Straight 3-Wire Pigtail #A45PB to wire it into your trailer wiring. The red wire from…
We do not carry the O-ring that is included with the Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles #RG04-230 separately. We only have it as a complete kit. I do not even see that Dexter offers this as a separate item on their own online…
Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…
Hey Jeff, so the offset B and W ball part #BWGNXA4085 that you referenced does not fit the OEM gooseneck hitch of your 2023 Ford F-350 as it was designed for B and W aftermarket hitches. Instead you would want the Curt #C68ZV for a 4 inch offset…
Filter Results
