Curt Ball and Safety Chain Loop Kit Installation - 2022 Ford F-250 Super Duty Video

The instructions for the Replacement Side Plates #DM49GV which fit the Demco Autoslide 5th Wheel Trailer Hitch 18K #DM79GV or 21K #DM29GV are not very helpful. I have linked them below for your verification but the 1/2" grade 5 bolts are…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

While the best and most certain way to tell if your 2018 Ford F-250 has the puck system is to call your local Ford dealer with your VIN, it should be pretty easy to tell otherwise. If your bed looks like the accompanying photo - with four accessible…

The Demco Autoslide 5th Wheel Trailer Hitch #DM8550034 can not be locked out to only pivot at the head of the hitch so you would still have it sliding back while making turns. That being said, this hitch is a top tier option when it comes to fifth…

Safety chains like the Curt #C95NR aren't required when using the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter #C32DR but if you want to attach safety chains there isn't any harm in that either.

Safety chains are not required to be used with the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter item #C32DR. The chain connectors will not be in the way the bed protector supports will mount over the sockets.

There basically is no difference but we have two part numbers for the Curt Crosswing depending on where we have it listed on our website. As a fifth wheel hitch it's part #C92DR or as an adapter for a gooseneck hitch ball part #C32DR.

Fifth wheel hitches like the #C32DR do not require safety chains so there aren't any brackets on the Curt Crosswing part #C32DR for them. It's an interesting caveat but if there isn't a hitch ball involved safety chains aren't…

You always need to keep your trailer tires filled to the max cold psi rating. If your current load range G tires have a 110 psi rating then that is what you need to keep them filled to. Tire blowouts are a result of damaging a tire (like hitting…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Air Lift WirelessAIR Compressor System part #AL74000EZ will work just fine being mounted on the outside of the frame. There will be no issues here even at a carwash as this is actually the default location the unit is intended to be installed.