Search: ball mount kit   >   Trailer Hitch Ball Mount   >   Fixed Ball Mount  x   >   Fits 2 Inch Hitch  x   >   !Steel Shank - Gray  x   >  

To tell if your vehicle has LED lights or incandescent lights, you really need to look at the light bulb itself as the outside lenses can be deceiving. Incandescent lights have a bulb with a filament like #VX-SDH11 where you see the wires making a…

When we installed the hitch part #75579 on a 2015 Dodge Grand Caravan we found that the hitch height from the ground to the top of the hitch opening was 12-3/4 inches. To allow a trailer with a 17 inch coupler height to be towed level you would…

The maximum tongue weight rating for this Draw-Tite Trailer Hitch #36407 that you referenced is 300 lbs. The weight of your electric scooter and ramp combined equals 271 lbs, and if that is all the weight that would be on the hitch then yes you…

Like most other brake controllers do, the Draw-Tite Activator IV, part #5504 sends a small test pulse of voltage through the brake output circuit to confirm that the trailer is plugged in and that the brake magnets are receiving the signal. This…

The best hitch for your 2023 Honda Passport is going to be the Curt Hitch item #C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it tucks up underneath your rear bumper cover nicely…

The Curt Trailer Hitch Receiver #C84BR is not the same shape as the Ford OEM hitch but the installation process is similar. Like the OEM hitch, the Curt hitch will bolt onto the frame and sit behind the rear bumper so the end result will be the same.…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

We have 2 inch hitches that fit your 2021 Audi Q7 like the Curt #C13277 that you referenced but due to how the vehicle is designed there isn't a way to install a hitch on the vehicle without trimming the fascia. This Curt hitch would be the best…

While there are no major modifications or drilling required you will need to trim a small portion of the rear bumper fascia on your 2022 Audi Q7, for the Curt Trailer Hitch Receiver #C13277 to fit. I have a included an image that shows where the…

For your 2018 Audi Q7 the best trailer hitch we offer that I would recommend for you is the etrailer part #e88KR because it has a concealed cross tube which makes it less visible than other hitches.

In order to install the Curt Trailer Hitch Receiver #C13277 some trimming of the fascia will be required. This will be a 3.5" x 7.25" area as outlined in the instructions. This is a Class III hitch with a 2" receiver and a concealed…

For your 2023 Subaru Outback Wagon, you can use the etrailer Trailer Hitch Receiver #e25TR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. It also has a nice matte black finish.…