1. Trailer Hitch Ball Mount
  2. etrailer
  3. Fixed Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 4 Inch
  6. Rise - 3 Inch
etrailer Ball Mount Kit - Extra-Long - 2-3/4" Rise or 4" Drop - 6,000 lbs

etrailer Ball Mount Kit - Extra-Long - 2-3/4" Rise or 4" Drop - 6,000 lbs

Item # EBMK4EL
lowest price pledge
Our Price: $87.87
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 13 lbs
Quantity: 
etrailer Class III,7500 lbs GTW Trailer Hitch Ball Mount - EBMK4EL
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Lowest Prices for the best trailer hitch ball mount from etrailer. etrailer Ball Mount Kit - Extra-Long - 2-3/4" Rise or 4" Drop - 6,000 lbs part number EBMK4EL can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (13)
  • Q & A (23)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer Trailer Hitch Ball Mount - EBMK4EL

  • Fixed Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 4 Inch
  • Rise - 3 Inch
  • Two Balls
  • etrailer
  • Class III
  • 7500 lbs GTW
  • Ball Mount Kit
  • Steel Shank
  • Steel Ball


etrailer 4" Drop Ball Mount Kit

  • Works with 2" x 2" hitch receivers (class III)
  • Kit Includes:
    • (1) Extra-long ball mount with 2-3/4" rise or 4" drop (# 40345)
      • Capacity: 6,000 lbs GTW and 600 lbs TW
      • Extends ball 11" from hitch pin hole
    • (1) Convert-A-Ball Interchangeable Ball System with a 1-7/8" and 2" hitch ball (# 901B)
      • Ball capacity: 10,000 lbs GTW
    • (1) Pin and clip (# PC3)
    • (1) etrailer ball mount bag (# ETBMB)


KIT etrailer Ball Mount Kit - Extra-Long - 2-3/4" Rise or 4" Drop - 6,000 lbs





Video of etrailer Ball Mount Kit - Extra-Long - 2-3/4" Rise or 4" Drop - 6,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Ball Mounts - Fixed Ball Mount - EBMK4EL Review

Today were going to review part number EBMK4EL, this is the Etrailer.com Super Extra Long Ball Mount Kit for 2-inch hitch. This kit will include an extra long ball mount. It will include the pin and the clip for attaching the ball mount to the hitch. It will include also the Convert-A-Ball Interchangeable Ball System that comes with a 1 7/8-inch hitch ball head and a 2-inch hitch ball head and an Etrailer.com Ball Mount Bag.This set will be nice to use if you have to tow multiple trailers that might have different size trailer couplers.First Im going to start with the extra long ball mount. This is part number 80228. This ball mount will have a 4-inch drop or a 2 -inch rise.

And basically drop, thats the position it is in now, would be measured from the top of this shank to where the ball sits. So that distance will be a 4-inch drop. Now the rise would be because if you turned it over and inserted the hitch that way, your ball would be up here, your measurement will be from the shank here to where the ball is seated right here. And again that would measure 2 -inch rise. And one other measurement would bethis is an extra long ball mount so basically from the center of the hitch pinhole here to the center hole where the ball would mount 11 inches.

So well extend it out from the hitch pinhole 11 inches. This ball mount does have a gross tow weight capacity of 6,000 pounds and a tongue weight capacity of 600 pounds.Next part is the part number PC3 which is the 5/8-inch diameter pin and clip and that would be used to attach when the ball mount is slid into the trailer hitch. When the holes are lined up, you just slide the pin and clip through there, attach it and that holds your ball mount through your trailer hitch.Now the next item is the Convert-A-Ball Interchangeable Bally System part number 901B. Now this part will include the shank and the washer and the nut to install it. The shank would install into the ball hole in your ball mount and the washer would be put on.

And the nut is a size 1 -inch size nut that would be tightened down to hold it on and then theres a hole in the bottom of the shank and the cotter pin and lets you slide and spread it. That cotter pin will help keep the nut on to the shank. I do want to give you a few measurements on the shank itself. The diameter which is this part here, thats the size hole thats needed in the ball mount, on this shank would be one each diameter and the length which is this part right here; on this shank would be 2 inches. And this ball system, the shank with the ball attached will have a gross towing weight capacity of 10,000 pounds.

And basically Ill show you how the hitch ball heads are attached to the shank. This one is a 1 7/8-inch diameter head which is marked right on the top here. They do have an integrated pin and what you would do is find the side that has the dimple on it, push it with your finger and go over the other side and pull all the way out. And then what you would do is line it up with the holes on the shank, push it all the way until its flush and youll have a 1 7/8-inch ball on your ball mount. Now if you end up having to tow a different trailer and a couple of sizes larger like a 2-inch, all you have to do is to push that pin out, take it off, find the hitch ball that says 2-inch on it. Push the side with the dimple on it and just push it through and boom. In a matter of seconds youll have a 2-inch hitch ball on your ball mount. One other nice feature I just want to show you on this hitch ball head is if youll notice they have a little rubber o-ring on this end and on the other end you can see in there theres an o-ring also so when its completely pushed in, the o-ring will seal on both these sides and will keep dirt or foreign materials from getting inside and causing the problem.The last item on this kit is the Etrailer.com Ball Mount Bag part number ETBMB. This item will work great for not only carrying your ball mounts but also any towing equipments such as tie down straps, pins, clips, locks. A strong handle makes it easy to carry and the large zipper opening which runs the whole length of the bag. Makes it very easy to install like in this case the extra long ball mount will fit in there no problem. This bag is made of a durable nylon material which will provide you many years of use. The zipper is a no-hassle zipper closure and handles for transportation. And then the last thing Im going to give you a few dimensions on the bag. Overall length is 16 inches and the height is 5 inches and the width on the bag would be 4 inches. And that should do it for our review of part number EBMK4EL. .


Customer Reviews

etrailer Ball Mount Kit - Extra-Long - 2-3/4" Rise or 4" Drop - 6,000 lbs - EBMK4EL

Average Customer Rating:  4.7 out of 5 stars   (13 Customer Reviews)


- EBMK4EL
by:

Excellent Web site, easy to navigate, great prices, easy purchase experience, fast delivery. I had someone install the hitch - all good, looks great - no photo, but take my word - it looks great on my 2003 Buick Rendezvous. An easy, "Five Star" rating (Web sales experience and hitch). 706680



- EBMK4EL
by:

great product, easily change ball mounts when needed, high quality and the storage bag is a great touch to keep everything organized, with some extra space for a few tools, would purchase again 499569



- EBMK4EL
by:

Everything was as described. Hitch was easy to install and works great! 399386



- EBMK4EL
by:

Just as described, excellent product. I would recommend keeping the interchangeable ball clean and removed from the receiver for years of headache free use. I use this on a 16 Town & Country with the rise, it sets the boat on a very level plane. 387732



- EBMK4EL
by:

I just got the product and haven't installed it yet but the packaging was torn to shreds. Even the UPS delivery guy commented about it. Everything was there. The products all look as described and I am pleased with that. I will let you know how it installs when we are done. Thanks 368788



- EBMK4EL
by:

Convenient to use. Its worth the price. 251238



- EBMK4EL
by:

The products ordered from eTrailer shipped and arrived quickly. Nothing was damaged and I was able to install everything easily. The extra long draw bar is perfect for my 2012 Town & Country mini van, providing good clearance of the rear bumper and ground. I would highly recommend these products. 150057



- EBMK4EL
by:

Over all the ball mount kit is great. Getting two size ball mounts is convenient. Only complaint I have is the hairpin cotter pin fits somewhat loose. Not a great design there but the rest is great. 141489



- EBMK4EL
by:

Nice quality bag to organize all your towing needs. However if you install the ball on the 4" rise side you will have trouble fitting it back into the bag, this is the only reason I did not give it an excellent rating. The quick change 1 7/8" and 2" balls are great. 111890



- EBMK4EL
by:

I have ordered from e-trailer on three different occasions and have been very pleased with all of my transactions. Good quality equipment, great website and processing, and excellent customer service and follow up. 5 Star outfit to deal with all around. Will definitely do business with them again, I highly recommend them to all my friends. Thanks again 93769



- EBMK4EL
by:

Thanks, Etrailer! The Ball Mount information is very helpful. This package works for my 2004 Sienna. Fast shipping. Happy with shopping experience! 81057



- EBMK4EL
by:

Good price, fast shipping, great product. Convenient kit to store away. Very pleased 45132



- EBMK4EL
by:

Heavy duty ball-mount kit! I love the quick-chang ball assembly. 43372


13
13

Ask the Experts about this etrailer Trailer Hitch Ball Mount

  • Does Hitch Need to be Factory Installed on 2015 Town & Country for Highest Towing Capacity?
    I have not heard of a towing capacity being sliced in half based on who installed the items; I also went through the owner's manual of a '15 Chrysler Town and Country that I found online and there was no mention of towing capacity being reduced without factory equipment. I assume this was the car dealer who told you this? While I cannot tell you for certain that what that individual said is not true, I would make it a point to contact other Chrysler dealers and specifically ask about towing...
    view full answer...
  • Towing Set Up for 2014 Chrysler Town and Country
    You can pull your 2003 Jayco Qwest pop-up that weighs just 2,000 lbs with your 2014 Chrysler Town and Country; I checked out the owner's manual and you are right that it has enough capacity for this trailer. The first thing you are going to need is a trailer hitch and I recommend the Draw-Tite Trailer Hitch # 75579; I have added a link to a video of this hitch being installed on a '14 Town and Country for you to take a look at. It has a 4,000 lb towing capacity and 400 lb tongue weight...
    view full answer...
  • Towing Capacity and Parts Needed to Tow with 2014 Dodge Grand Caravan
    The owner's manual for the 2014 Dodge Grand Caravan with 3.6L engine and automatic transmission indicates on page 543 that this vehicle can tow up to 3600-lbs under specific conditions. Those conditions relate to how many passengers there are in the van and how much other cargo. It is a good idea to check your manual in case it has different information. I checked a bunch of 42-inch zero-turn mowers and found their weights to be as follows: John Deere Z235 = 459-lbs Gravely ZT 42...
    view full answer...
  • Trailer Hitch and Wiring for a 2015 Chrysler Town and Country
    The most popular trailer hitch for your 2015 Chrysler Town and Country, and what I recommend, is Draw-Tite trailer hitch # 75579. This is a Class III hitch with a 2 inch receiver so it is a versatile option compatible with many accessories. I have included a link to a video showing an example of this hitch for you. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4EL. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set,...
    view full answer...
  • Hitch Recommendation for a 2014 Chrysler Town and Country that Doesn't Require Fascia Trimming
    Draw-Tite trailer hitch # 75579 will fit all models of the 2014 Chrysler Town and Country. There should be no bumper fascia trimming required. The only trimming mentioned in the instructions, linked to the right, is possibly on a mudflap. I have also included a link to a video showing a typical installation for you. The Curt Hitch part # 13364 that you referenced would most likely require you to trim the fascia so I would not recommend it for you. If you plan on doing some towing...
    view full answer...
  • Is Bumper Trimming Required to Install a Trailer Hitch on a 2016 Chrysler Town and Country
    Based on an installation we did of Curt hitch # 13364 on a 2016 Chrysler Town and Country you will not have to trim the rear fascia to install the hitch. However, it may press up some on the bottom of the fascia directly above the receiver. I have included a link to a video showing installation on a 2016 model for you. When installed the hitch measures approximately 13-1/4 inches for the ground to the top of the receiver opening. If measuring to the bottom of the receiver it would be...
    view full answer...
  • Recommended Trailer Hitch For 2012 Chrysler Town And Country
    We do offer some Class lll hitches for a 2012 Chrysler Town and Country. I did some research on your van and found that the trailer towing weight for your Town And Country is 3,600 lbs, and is 3,500 lbs if you have the Stow-N-Go seating. The trailer hitch I recommend is the Curt Trailer Hitch, part # 13364. This is a Class lll hitch and has a 2 inch receiver opening. You will want to consider where the receiver end is under your van when you want to install any accessories like...
    view full answer...
  • Towing Capacity, Trailer Hitch, Wiring, and Transmission Cooler for a 2015 Chrysler Town and Country
    The towing capacity of your 2015 Chrysler Town and Country is going to depend on a few factors. Take a look at the picture I have included from the owner's manual. It illustrates the capacity of the vehicle in certain scenarios. At most the van can tow 3,600 pounds. I do recommend a transmission cooler because when towing or even when just carrying a lot of weight in the van, it puts additional strain on the transmission. A supplemental cooler will help to lower the fluid temperature...
    view full answer...
  • Will Draw-Tite Trailer Hitch 41116 Fit 2010 Ford Crown Victoria Police Interceptor w/Dual Exhaust
    First, you may not have to do anything with the exhaust because it appears that it may only affect Lincoln Town Car models. In the event that the exhaust on your PI Crown Vic is in the way of the hitch installation, the only modification is to move a hanger bracket. I have linked the instructions so you can see the possible modifications. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4EL. It includes a ball mount, interchangeable ball set, a hitch pin with...
    view full answer...
  • Is Trimming Required to Install a Draw-Tite Trailer Hitch on a 2013 Chrysler Town and Country
    Draw-Tite trailer hitch # 75579 will fit all models of the 2013 Chrysler Town and Country. There should be no bumper fascia trimming required. The only trimming mentioned in the instructions, linked to the right, is possibly on a mudflap. I have also included a link to a video showing a typical installation for you. If you plan on doing some towing then I also recommend etrailer ball mount kit # EBMK4EL. it comes with the proper extra long ball mount, interchangeable ball set, hitch...
    view full answer...
  • Towing Capacity and Towing Equipment for 2015 Chrysler Town and Country
    Your 2015 Chrysler Town and Country Touring van's towing capacity is set by Chrysler and the online owner's manual I reviewed indicates the 3.6L automatic transmission van can tow a trailer up to 3600-lbs with 2 passengers in the van. With more passengers and more luggage in the van the towing capacity drops. This information appears on page 562 of the online manual, which I have sent separately for you, but your printed manual may differ so it's good to check it too. Draw-Tite hitch...
    view full answer...
  • Trailer Hitch Recommendation for the 2010 Mercury Grand Marquis
    We have several hitches available for your 2010 Mercurt Grand Marquis. I have included a link to the options that we offer for your reference. The Curt # C12130 that you mentioned is not considered a fit for your 2010, it was a fit from 1992-2009. Of the hitches that are confirmed as a fit for your I recommend a Class III option like the # 41116. This hitch offers a 2 inch receiver that is compatible with a wide range of towing products, and a hitch accessories. If you plan on doing...
    view full answer...
  • Do Body Panels have to be Removed to Install a Trailer Hitch on a 2008 Mercury Grand Marquis
    You should not have to remove any body panels to install Curt trailer hitch # 13707 on your 2008 Mercury Grand Marquis. I have included a link to the installation instructions and a video showing installation for you to view. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4EL. It comes with an extra long ball mount (a long ball is required on this vehicle due to the position of the hitch), interchangeable ball set, hitch pin with clip, and a storage bag. For...
    view full answer...
  • Does the Bumper have to be Altered on a 2001 Nissan Quest to Install Draw-Tite Trailer Hitch
    There is no bumper fascia trimming or alteration of any kind needed to install Draw-Tite trailer hitch # 75102 on a 2001 Nissan Quest. I have linked the installation instructions for you so you can see the required steps to install the hitch on the van. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4EL. It comes with a ball mount, interchangeable ball set, hitch pin with clip, and a storage bag. And for trailer wiring you can use # 119178KIT. I have linked...
    view full answer...
  • Trailer Hitch and Wiring for a 2016 Chrysler Town & Country with Stow 'n' Go Seats
    Yes, Draw-Tite trailer hitch # 75579 will fit your 2016 Town & Country with Stow 'n' Go seats. It fits all models of the van. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4EL. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose...
    view full answer...
  • Is There a Trailer Hitch Available for the 1987 Ford Crown Victoria
    I have a solution for you, but the Curt # 13707 is not a confirmed fit on your 1987 Ford Crown Victoria. Instead you'll want to use the Draw-Tite Max-E Loader # 41116 which has a 2" receiver and does not require any drilling into the frame of the vehicle for installation. To complete your towing setup you will need a few other items, like a wiring harness, ball mount and hitch ball. For the wiring kit you'll want to use the Tekonsha 4 Pole Hardwire Kit # 18252 (for combined 2 wire systems)...
    view full answer...
  • Trailer Hitch and Wiring for a 2014 Chrysler Town & Country with Stow n Go Seats
    I am not sure why you are being asked about the trim level of your 2014 Chrysler Town & Country because the trailer hitches (at least the ones we carry) fit all models so it would not matter if it was a Touring model or something else. The most popular hitch for your van is # 13364. If you plan on doing some towing you might be interested in etrailer ball mount kit # EBMK4EL. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip,...
    view full answer...
  • What Exhaust Modification is Needed to Install Trailer Hitch # 87408 on a 2011 Lincoln Town Car
    By looking over the instructions for the Draw-Tite Trailer Hitch, # 41116, since the bracket already has to be rotated 180 degrees, also moving it to the outboard side of the frame rail may make it so that it will no longer be able to reach the exhaust that hangs from it. There may also be too much space between the hitch and frame with the hanger moved to the outboard side of the frame. I have included a link to the installation instructions for you to view to give you a better idea...
    view full answer...
  • Does Dress Panel Get Removed and Exhaust Modified to Install Trailer Hitch on 2006 Lincoln Town Car
    Draw-Tite trailer hitch # 41116 for your 2006 Lincoln Town Car does require removal of the dress panel for hitch installation. On 2003 & Later Lincoln Town Car, it will be necessary to relocate passenger side exhaust hanger bracket as follows: Unbolt hanger bracket from vehicle frame. Remove rubber hanger from hanger bracket and tail pipe bracket. See Figure 2. Rotate rubber hanger and reattach to hanger bracket as shown in Figure 3. Do Not reattach to tail pipe bracket at this time....
    view full answer...
  • Ground Clearance with a Trailer Hitch Installed on a 2011 Chrysler Town & Country
    The trailer hitches for the 2011 Chrysler Town & Country that will allow for the most ground clearance are the ones where only the receiver part of the hitch is visible such as # 13364 which hangs down about an inch or so lower than the bottom of the exhaust tip which you can see in the video showing installation that I have linked. The rear fascia on the vehicle may need to be notched out a little as specified in the instructions which I have also linked. When we installed this hitch...
    view full answer...
  • Does the Exhaust have to be Modified to Install a Trailer Hitch on a 1994 Lincoln Town Car
    To install the Curt Trailer Hitch, # 13707, on a 1994 Lincoln Town Car, you should not have to modify the exhaust in order for this hitch to fit the vehicle. I have included a link to the installation details for this hitch below. They state that relocation of the passenger side exhaust bracket is required on 2003 and later Town Cars. I have also included a couple of installation videos showing the installation of this hitch on similar vehicles. To complete your towing set up, I recommend...
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2003 Ford Crown Victoria with Dual Exhaust
    For your 2003 Ford Crown Victoria I recommend the Curt hitch # 13707. This is a Class III hitch with a 2 inch receiver rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight so it covers the capacity of the vehicle. Because your Crown Vic has dual exhaust there is some slight modification to the exhaust that will be needed to install this or any hitch for the vehicle. Its actually not all that difficult and I have included a link to a video showing an example installation...
    view full answer...
  • Will the OEM Trailer Hitch from a 1993 Mercury Grand Marquis Fit a 2001 Ford Crown Victoria
    I checked up on trailer hitch 88002 and found that it was an OEM hitch put on several vehicles. However, the 2001 Ford Crown Victoria is not one of the vehicles listed as a fit so I do not recommend trying to install it on the Ford. For a hitch that will fit the Crown Vic the most popular Class III hitch is # 13707. I have included a link to a video showing a typical installation and a link to the installation instructions for you. I also recommend the etrailer ball mount kit # EBMK4EL....
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Jeff D
Updated by:
Sarah W
Updated by:
Jenny M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.