Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…
The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
Your picture didn't make it through but it sounds like you would like to upgrade your tire and wheels on your trailer. You may substitute a 14 inch tire and wheel as long as you have both the wheel well height and width clearance for it, the…
The smallest diameter 13 inch trailer wheel and tire will have a diameter of 24.1 inches (ST175/80-13). There are 3 common 12 inch trailer tire sizes: 4.80-12 has a diameter of 20.5 inches, 5.30-12 has a diameter of 21.9 inches, and 145/80-12 has a…
Hey Ryan, the bracket kit part #PF1135-BKT-2 is normally the best solution as long as the trailer has a frame rail that runs the perimeter of it. Then if the frame is 2 inches wide you would want the part #CE15284GA and you'd be set. The other…
I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…
Your current tire should have some type of code on it that indicates its size. The Kenda K371 Bias Trailer Tire, #AM10002, is size 4.80/4.00-8. It fits on 8 by 3-3/4 inch rims. It sounds like the 46 and 27 inch measurements you have given are the…
You do indeed have a 12 inch rim. When you measure the diameter of the wheel, you'll need to measure the diameter of he wheel where the tire bead meets the wheel. I've provided you a cutaway diagram of a wheel showing where the measurement…
When choosing tie-down straps like the BoatBuckle G2 Retractable Tie-Down Strap, #IMF14220, you will want to keep a few things in mind. Boat tie-downs are designed for normal highway driving. The purpose of most boat tie-downs is to strap the…
Actually, the width of a trailer is determined by it's widest point. If the wheels are outside of the frame of the trailer then the width is measured for that trailer from outside of the fender to outside of the fender on the other side of the…
The Fulton Plastic Fender with Top Step, part #F008553, does not come with mounting hardware. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use the Redline Galvanized Steel,…
There isn't a whole lot of difference between Dutton-Lainson roller bunks #DL21741 and CE Smith roller bunks #CE27710. Both have 5 foot long sections. Each section is rated for 1500 pounds. There are 6 rollers per section on both. Both are made…
Filters
